This research presents damage causes of the pylons in the ancient Egyptian temples based on 3D finite elements analysis. The main purpose of the research determines the failure causes of the first pylon of the Ramessium temple, which is situated in Upper Egypt, at Luxor “Thebes” on the west bank of the Nile River. The first pylon of Ramessium temple subjected to seismic activity effects on long term, combined with several structural damage factors such as the defects resulting from the construction technique, where the builder used the poor quality of stones in foundations of the pylon, the building materials residue was used as filler for the core of the pylon walls, and it lacked vertical joints between the courses. In addition to it founded on alluvial soil that is vulnerable to contaminated water, it is still suffering damage factors and urban trespasses at the moment. All of the former factors helped the pylon to be affected by the earthquakes loads that occurred on it. The structural behavior of the pylon under self-weight and earthquakes loads were carried out by Numerical analysis to find out the loads and stresses which caused collapsing of the pylon. Results of the study indicated that the pylon subjected to a horizontal displacement due to old earthquakes force, led to collapse of the pylon. Finally, the study represents use of modern technique to study the structural behavior of the most important architectural units in ancient Egyptian temples to identify the causes of its collapse.
The concept of conservation represents an important significance in thought of the man since pre-dynastic times, which seeks to conservation on all that has value; the architectural heritage in ancient Egypt varies between temples; tombs, pyramids, etc. The mortuary temple of Ramessium at west Thebes (Qurna) was inscribed as a World Heritage Site (UNESCO) in 1979 as a part of ancient Thebes and its Necropolis. It is located nearly 670 km to south of Cairo, it is situated on the west bank of the Nile, its location Latitude: 25˚43'57'', Longitude: 32˚37'42.96'', it has had many values & significance, the most important values are: archaeological, historical, architectural and artistic values, the ancient Egyptians called the temple the “million years temple” due to its huge surface area [
It is also home to great statues of Ramses II that were built on the site. It took 20 years and tens of thousands of workers to build the huge complex that was dedicated to the God Amun. This temple was constructed to serve two purposes; the one that the temple was publicly built to allow the ancient Egyptians to practice their religious rituals, including prayer and ritual offerings to the gods, the second purpose, it was constructed to show the Pharaoh’s greatness and his political and military accomplishments, and perhaps more so (
All the structures in front of the pylon have disappeared today and are now being covered over by the farmland. We can imagine there was a forecourt with a monumental entrance and a dromos between the quay and the pylon. The pylon, whose eastern side is now totally ruined, most certainly had two flag masts on each of its piers; it marked the temple entrance and the first courtyard.
The Egyptians considered their monuments to be charged with the preserved western side of the pylon being decorated with war campaign scenes, notable episodes from the famous battle of Kadesh (a central Syrian city) waged against the Hittites. Thanks to certain literary pieces, this battle is known about: the war report and Pentaour’s poem. This battle is also illustrated in Abydos, Karnak, Luxor and Abu Simbel temples [
The temple has been suffering damage factors and causes since ancient times because of the earthquakes and ancient flash flooding, it is also suffering damage factors and causes at the moment such as agricultural, groundwater raised, housing, urban trespasses and man-made destruction, pollution and infection of groundwater beneath the temple and its site and higher plants growth. This temple has not received enough attention from specialists in architectural conservation, particularly, the great pylon of the temple, which is totally ruined. Structural damage is caused by any negative changes that may affect the structural behavior of the building, due to increased mechanical effects or a reduction in the structural efficiency of the building elements, due to the impact of various damage factors [
Structural damage of architectural heritage occurs due to the impact of earthquakes, differential settlement, rotation, or any other effect of the interaction between the structure and the soil [
The success of the structural restoration project mainly depends on the accuracy of the diagnosis, which is to identify the causes of damage and deterioration. The aim of this paper is to know the collapse causes of the great pylon of Ramessium, through study the structural behavior under the effect of self-weight and earthquake loading.
In this research, the architecture, the construction, and the chronological development of the pylons used in ancient Egyptian temples were briefly investigated. Afterward, 3D F. E. M numerical static and seismic analysis; taking into account soil and structural features in order to assess the real safety levels and the weakest areas and safety factors, the current state of damage and conservation proposals for the great pylon of Ramessium temple.
The pylons were clearly spread in the early New kingdom; however, we still don’t know the source of its innovation. It may also have been known during the Middle Kingdom; however, where we found very little of its ruins at that time; the excavations were per-formed in the Ashmunin city of Hermopolis, revealed the foundations of some pylons of a temple dating from the Twelfth Dynasty. In Memphis, Petri discovered elements of one of the pylons, dating back to the Twelfth Dynasty. It is also noted that the temple of Medamud, which was built during the first intermediate period, was attached to a huge pylon. In one part of Abydos temple, built during the Sixth Dynasty, excavators have found stone blocks with several longitudinal lines: Petri sees it as remnants of some pylons.
Finally, within the sun temple, in which back to the king of Nyuserra (Fifth Dynasty), it was observed that two distant areas facing each other, in the facing of courtyard that surrounding with the pyramid, it was built slightly diagonally, thus creating two towers, which could be considered as the prototype of the known traditional pylon.
The ancient Egyptians were believed that the pylon symbolizes to the horizon, as a corridor between two mountains (Baju and Manu), in which the sun rises, the ancient Egyptians were thought that the sun is rise between its two towers, which are theoretically head to the east, then enlighten the temple and its rays reach to the Holy of Holies [
The pylon is considered a huge build consist of two towers in which symmetrical shape, between them a door connecting to the open courtyards and roofed columns. The pylon facade is ample from the undermost, and narrows whenever it rose, it is interspersed with a number of Entries ranging from two to eight and has been dedicated to the installation of temple flags, the façades of pylons were ornamented with huge wooden flagstaffs (reaching 30 m in height) capped with colorful cloth flags, The flagpoles were carved from individual wooden beams that brought from the forests of modern-day Lebanon or northern Syria from, these flagstaffs were often tipped with invaluable metals that reflected the rays of the sun [
The techniques used to in the construction of pylons of the temple were derived from the incomplete temples that provided us with information about the method used in the process of building; the first pylon in Karnak is considered
the most important source for understanding the construction of stone pylons typical of the Egyptian temples. Around the unfinished first pylon of the temple, there are remains of mud brick ramps, which are considered important evidence on using it to access to the upper courses of the wall (
developed, where they used the bricks in as retaining walls of the trenche of the foundation to avoid the soil collapse, in the Ptolemaic period, the construction techniques were developed, more substantial blocks were used to support the superstructures, this is clearly demonstrated in the temples of Dandara, Edfu and Kom Ombo. After the quarried stone arrived at the building site, the bobbins, ropes and a crow-bar were used to moving the blocks towards their place in course of the wall (
Workers used to employment large rectangular stones of slightly differing shapes and sizes without undressing in the once course of the wall as a kind of rationalization of consumption in stone blocks, set together with irregular joints. These were set in courses of varying height; the 18th and 19th Dynasty pylons at Karnak provide good examples of this typical form of construction (masonry). This technique was used occasionally in which blocks are cut to a uniform size and walls assembled in courses of parallel heights, this method was discontinued in the New Kingdom, but it was taken up again at Karnak during the 25th Dynasty with larger sized blocks, the walls were composed of standardized courses. In general, they used to employment high quality stone in the outer casing of the pylons, but the core of the wall itself was often composed of local, poorer quality materials, or reused blocks of collapsed buildings [
The distinct structure of this complex corresponds to an evolution in the funerary temple idea: the grave was concealed deep in the hill and the temple was constructed on the edge of the desert region facing the Nile and the east bank temples. This idea combines the pure funeral function with the resting location of Amun’s bark; for instance, during the west bank processions, especially the Beautiful Valley Festival. This evolution in funerary architecture culminates in the time of Ramesses II in a real divine temple. This kind of temple had its own local form of the God Amun with which the deceased king was recognized as a god. Ramessium’s temple includes an area of about 6 hectares (N-S 220 m; E-W more than 280 m) in its entirety. The two stone temples are situated in the center of the complex and around them, on three sides, on the north, south and west sides; there are annexes and mud brick houses. These structures, with their excellent surviving vaults, have just produced the storerooms [
conquered by Ramses III during his military campaigns; you’ll also see scenes taken to the King by inmates. There are scenes from the renowned fight between Ramses II and the Hittites on the left side of the pylon. You will then continue to the first open courtyard, where many damaged statues will be seen.
Structural System
The structural system of the first pylon of Ramessium temple is summarized in the following:
1) Select of the site: determine the site of the pylon that is situated in the front of the temple, it included on the main entrance in the middle; it shall be perpendicular to the Nile River and head from east to west with the direction of the temple.
2) Foundation system: the ancient builder followed several steps in the construction of the pylon we summarized in the following: a) gypsum is scattered on the ground to determine the horizontal design of the pylon. b) The foundation of the pylon consisted of a trench mined down from ground level and partially filled with clean, dry sand. c) The blocks laid in trenches upon a bed of sand and were leveled, to providing a regular surface for a building’s superstructure; remains of the stones were used as a core for the pylon foundation. d) After completing of construction of the pylon foundation, channels carved carry out into the horizontal surface of the last course of the foundation, providing a uniform surface to cohesion the courses together.
3) The construction system: a) the stones of one course were placed together in a row and each individually cut along their sides and combined together by stone dowels. b) Channels were carved in all surfaces of courses of the wall; these diggings were filled with a bonding mortar to ensure that the blocks cohesion to each other. c) The field study showed that the construction courses of the first pylon are almost equal (
Notes on the construction style of the first pylon
The first Pylon of the Ramessium temple was founded on alluvial soil that is vulnerable to water, due to that the ancient builder didn’t realize effect of the soil type on the foundations, in addition to using shallow trenches in foundation process. These the trenches were filled with loose rubble, chips of dressed stones and reused material because of may be technical or economical reasons (
1) The poor quality of foundations of the pylon where the builder used a few courses of friable stones to economize in the consumption of stones, the foundation of the pylon gate was built separately from the foundations of the pylon itself.
2) The ancient builder used high quality sandstone as the outer casing of the pylon where the wall blocks are cut to a uniform size and assembled in courses of parallel heights.
3) The walls of the pylon were built of separate courses and the limestone residue was used as filler for the core, the blocks were horizontally assembled together by stone dowels, but it lacked vertical joints between the courses.
4) Lack of interest in the process of adhesion between the blocks and links in the walls of the Pylon, where the pylon was built from two parallel walls between them filler of rubble and reused stones.
5) The eastern side of the pylon is totally ruined now, and the western side is suffering from different sizes, shapes of cracks, and partially loose of the wall. The northern side was destroyed more than the southern side of the pylon.
6) We are observed different weathering forms in the pylon’s stones, such as loss of stone material, missing parts, erosion of stone surfaces, exfoliation, efflorescence of salt, Pitting, peeling, and granular disintegration.
The pylon has been suffered from different damage factors since the time of construction as a result of defects in construction technique, soil settlement due
to the effect of groundwater and emergency damage factors, such as flooding or earthquakes.
The pylon was founded on the clay soil, this kind of the soil is impermeable so; it is affected by raise groundwater level, as a result size of the soil expands due to increases of moisture content of the soil, when the moisture content is decreased, size of the soil is shrinked, expansion and contraction of clay minerals leads to damage of the foundation soil which affects the buildings, the groundwater containing various kinds of mineral salts, in which they are the most important physio chemical weathering and damage processes that affect building materials of the foundation [
This is what happened in the soil beneath the pylon, which led to an irregular settlement. The stones of poor quality that were used in the core of the pylon foundation were greatly affected by soil damage, which helped on settlement of the building, in addition to that shallow trenches of the foundation led to non-resistance of the foundation to overload of large building units [
The weakness of the foundations led to intolerance to the static effects of dead loads resulting from the self-weight of the huge blocks. It was found that use of different building materials in construction of the pylon’s foundation leading to occurrence of imposed stresses on the building, due to different of coefficients of expansion and contraction of these materials when exposed to various damage factors [
According to construction style in ancient Egypt, particularly in the New kingdom period the walls of the pylon consisted of two outer walls, and the interior core was filled with mixed, reused and rubble blocks. The construction style which used in the pylon was one of the most important factors that helped in collapse of the building, where the interior core was filled with reused blocks which readily damaged because of affecting raise groundwater level, resulting in a fall for this filler and thus the malfunction has occurred in the structural system of the pylon, so these masonry become fissured and subjected to damage from vibration, the core will separate, leaving the outer walls to carry the loads in full, for this reason, various sizes of cracks were appeared in different places of the pylon. It was also found that the weakness of the vertical links in the wall led to the building subjected to increased stresses.
Finally, there are constructional defects resulting from the building style that was followed in construction of the pylon, these defects helped jointly with different damage factors in appear different construction damage symptoms, such as collapsing in the main façade of the pylon, fall down of the interior core, cracks in different sizes, loss of stone materials, partial loss in walls of the pylon, separation of stone blocks from each other.
According to several seismic and geological studies during different periods of time, many archaeological buildings were destroyed in Thebes and Middle Egypt [
Accordingly, the underlying layer’s liquefaction and deformation will produce vertical cracks in the upper soil and break it into different blocks, which then travel horizontally or in the direction of the slope gradient (i.e. towards the river). The blocks bend and tilt to different sides, amplifying the destructive seismic effect repeatedly and causing the surrounding structure to experience the greatest damage. The blocks bend and turn on different sides, continuously amplifying the catastrophic seismic effects and causing the most serious damage to the surrounding structure. This influence likely facilitated the Ramses II temple’s extreme destruction [
The structural design of the pylon resists the vertical loads resulting from dead loads of large stone blocks, but doesn’t resist the horizontal displacement resulting from earthquake movement because the ancient builder didn’t care about vertical block joints, in addition to that the pylon consists of two outer walls, and the interior core was filled with mixed, reused and rubble blocks, as a result, there was no moment transfer between these elements, which resulted in the building hasn’t bear the horizontal displacement of earthquakes.
In addition to the previous reasons which are responsible for structural damage of the pylon, there is another factor affecting in damage mechanism, the sandstone is the main building material of the pylon has low ductility, therefore it is greatly affected by horizontal displacement of the earthquakes. The tensile force that occurred due to the earthquake’s effects led to varying severity damage such as cracks in the walls which is characterized by varying depth and breadth or separation of architectural elements, cracking and collapse on the long term.
Time | Location | Richter scale | Seismic damage |
---|---|---|---|
600BC | Luxor | 6 | Damage occurred in Thebes temples |
28-27BC | Luxor | 6 | Cracking and collapse in Ramesseum temple |
967AD | Upper Egypt | 6 | Damage occurred in Karnak temples |
1778AD | Upper Egypt | 6 | Damage occurred in Thebes temples |
1850AD | Upper Egypt | 6 | The earth’s crust has been affected in upper Egypt |
1899AD | Upper Egypt | 6 | Damage occurred in Ramesseum temple |
1981AD | Kalabsha | 5.6 | Low affecting occurred in Aswan and Luxor |
1984AD | Abou Diab | 5.1 | Low affecting occurred in Aswan and Luxor |
In recent years, (FE) computer programs have made it easier to perform detailed nonlinear dynamic analysis; the objective was to understand the structural behavior of historic masonry building under the different loading conditions [
Equivalent static load (simplified modal response spectrum) was used for structural analysis of earthquakes loadings. In this method, the dynamic forces resulting from earthquakes are converted to horizontal static force, to study its effect on the building, building materials, construction style of the pylon, and kind of the foundation soil are taken into consideration.
F b = S d ( T 1 ) × £ w / g . (1)
Fb = Ultimate shear force.
Sd ( T 1 ) = Response spectrum.
G = gravitational acceleration.
T 1 = Fundamental period of the building.
According to the previous Equation (1) and curve response spectrum, the values of the equivalent horizontal forces affecting on the front facade of the pylon are shown in
When the pylon is exposed to horizontal earthquakes loads, the horizontal forces attempt to overturn the building, the pylon weight works to balance of the building against these forces, the shear force affecting on the pylon shows in, where we observe that value of the shear force increase in the lower parts of the pylon, which amounted to 2233 tons (
Weight of the pylon (W):
- Side facade area = 0.5 × (14 + 10.5) × 22 = 269.5 m2 (
- The volume of the left part of the pylon (V) = Side area × Part length.
= (269.5) × (31.9) = 8490 m3.
The weight (W) = Density (D) × Volume (V).
= 1.9 × 8490 = 16131 Ton.
Total weight (Wt) = 16131 × 2 = 32262 Ton.
M stability = Wt × B/2 = 32.262 × 7 = 225.83 T∙m.
M overturning = 152.922 T∙m.
M stability / M overturning ≥ 1.5 225.83 / 152.922 = 1.47 < 1.5 ( Unsafe ) . (2)
According to the Egyptian Code of Earthquake Loads, M stability/M overturning should not be less than 1.5 (
3D finite elements used to understand the structural behaviour of the pylon under seismic loads. The resultant deformations are shown in
(y-y). According to the Egyptian Code we can calculate the horizontal displacement value by the following equation:
D r / V = 0.005 H (3)
Dr: Displacement calculated from the program.
V (Coefficient depends on the seismic zone) = 2.5.
H (Diagram) = 4.4 m.
Dr/V = 0.005 H.
26/2.5 = 0.005 × 4400.
10.4 < 22.
From the previous result, it is shown that the horizontal displacement of the building did not exceed the safety limits according to Egyptian code.
Prokon program was used to find maximum Moment resistance (Mr) that structure can tolerate without cracks, which reached to (22.95) n/mm according to the structural design of the pylon.
After the structural analysis of the SAP program we set limits for the moment by the value of (Mr) that was taken out of Prokon program, where the largest values of (Mr) represent the areas subject to cracks and collapse as shown in
3D finite elements used to understand the structural behaviour of the pylon under dead loads, the maximum vertical displacements diagram of the pylon under dead load is shown in
After finishing the analysis of the pylon, the resultant deformations are shown in Figures 14-16, where
The study concluded that the first pylon of Ramesseum temple subjected to collapse due to the effect of horizontal displacement and shear force of old earthquakes jointly with construction defects and different deterioration factors, the previous results showed that the pylon was designed to resist dead loads but not suitable to resistance of earthquake loads, this explains collapse causes of the pylon, when it subjected to old earthquakes effects, in addition to other damage factors.
The paper presented a study carried out on the first pylon of Ramesseum temple which dates back to the 19th Dynasty of Pharaonic period to determine its collapse causes. The pylon is totally ruined because it subjected to old earthquakes jointly with construction defects and different deterioration factors. 3D numerical model of the first pylon of Ramesseum temple was created using the finite element (FE) software SAP 2000 to understand the structural behavior under the different loading conditions (earthquakes and self-weight loads) that the pylon had undergone to. This method contributed to identifying force and weaknesses points of the pylon, from which we are concluded that the collapse causes of the pylon is the dynamic loads represented by the horizontal and vertical acceleration wheel of the old earthquakes, in addition to the random filling of construction blocks of the core of the pylon and neglecting vertical joints between the building courses.
The study concluded that old builder did not take into account in structural design of the pylon that it bears the dynamic loads it might subject later.
The study results give way to us to find the appropriate method to the intervention with reconstruction of the pylon, including the preservation of original pylon blocks with establishment a core of hollow reinforced concrete to install the external blocks of the pylon walls on it, with no adhesion of the original blocks with the modern building’s core, in addition to consolidation of the soil with establishment striped foundations of the treated concrete beneath the pylon, taking into consideration that the core of the build is resistant to earthquake loads, and the historical and architectural values of the pylon are according to international conventions and standards.
I would like to thank Eng. Barakat Heshmat Mohamed, consultant of the civil engineering of Gamaan office for engineering consultancy and geotechnical laboratories, for his cooperation and valuable efforts in this research.
The author declares no conflicts of interest regarding the publication of this paper.
Mohamed, E.H. (2019) 3D Finite Elements Technique for Collapse Causes of the Pylons in Egyptian Temples: A Study of the Great Pylon of Ramesseum Temple, Luxor, Egypt. Open Journal of Geology, 9, 1022-1041. https://doi.org/10.4236/ojg.2019.913103