The paper describes a GIS approach to identify the most suitable areas for growing the Paulownia tree in the Province of Bergamo; this work will become the subject of a dissertation thesis at the School of Engineering of the University of Bergamo. Paulownia is quite an ancient tree, well known especially in the far east countries, for its wonderful flowers and the quality of the wood which is a source of certain profit. The paper is focused on the employment of the Paulownia tree against air pollution, since its big leaves absorb high amounts of CO 2 in the atmosphere and can capture the small particles of pollutants in the air ten times more than any other tree species. First, the analysis identifies the most favourable areas for its growth in the Province of Bergamo. Secondly, among the latter, the analysis detects the strategic areas for its growth near the most polluted zones. Finally, a quantitative evaluation is carried out about the trees contribution against pollutants in the atmosphere.
The problem of air pollution is of great interest nowadays, since many kinds of dangerous emissions flow directly in the air we breathe. The consequences are of great danger for human and animal health and the number of ill and dead people is increasing also with a lack of the needed control, information and intervention by the authorities. Of course also the environment and cultural heritage are endangered by this phenomenon.
The cause is mostly anthropic and so we are directly responsible for what is happening in many places in the world.
For this reason, the idea developed in this study has been to identify a possible green solution that could help to improve the current situation. The suggestion of the Paulownia tree has come from one student of the GIS course at the University of Bergamo, School of Engineering. The proposal shows that young people are deeply concerned about environmental issues and they are worried for their future. This is important, since a conscious approach is needed and information has to be spread.
The area selected for the analysis is the Province of Bergamo, since in our University the students mostly live in the town of Bergamo and the surrounding valleys, and also because air pollution is a crucial issue also here, due to human action and particular terrain morphology and climate conditions. The first step has been to identify other studies suggesting the use of this tree against pollution, but the only found reference is that of a Russian company, called “Environmental Investment” [
Paulownia, also known as empress or kiri tree, has its origins in central and western China. Historical records indicate that it was highly prized for its medicinal, ornamental, and timber uses [
The Paulownia tree existed in North America prior to the last ice age [
The genus was named Paulownia after Princess Anna Pavlovna of Russia, daughter of Tsar Paul I of Russia [
The Paulownia tree originally grew only in mild climates. In time, some laboratory researches have allowed to artificially select new species of Paulownia which can adapt to cold winters and dry summers. The tree can now grow in places with higher temperatures and also at higher latitudes, which means colder regions. It is important to underline, as it will be explained later, that air pollution is responsible of the rising of the air temperature of our planet. Other genetic modifications allowed to obtain a better, fast growing, light and highly-prized timber which is much appreciated for commercial purposes and business plans.
Because of its fast spreading, in some US states [
However, many laboratory studies and manipulations have provided species of cloned Paulownia which produce sterile seeds, this way bypassing the problem [
Anyway, the tree, with the purpose of a remunerative harvesting plan, is spreading in the world, because of the fast growing, high prized timber which allows to achieve high profits in a relatively short time [
Many benefits and uses can be derived from the Paulownia trees and they are described hereafter [
Ornamental Use―The tree has wonderful purple scented flowers and big leaves which provide shade.
Forestry―The wood is fast growing and fire resistant (University of Texas states it is fire-resistant up to a flashpoint of 477˚) [
Soil environmental issues―Paulownia is capable of adapting, growing and developing in poor soils, this way improving and recovering them [
Air Pollution―Paulownia helps to clean the air polluted by harmful gases and particles, which reach high concentrations, especially in large industrial cities. Paulownia can absorb 10 times more CO2, necessary for its metabolism, than any other tree species, releasing large quantities of O2 through photosynthesis [
Each acre of trees can absorb 13 tons of harmful CO2 gases and particles from the air each year and each tree can release about 13 lbs of oxygen per day [
Medicine―The pharmaceutical industry produces medicines based on Paulownia with a good action for the liver, kidneys and lung diseases [
Commerce―The wood is very light, it does not warp, crack or twist. It is used for furniture, musical instruments, doors, mouldings, window frames, poles, pulp, paper, veneer, plywood, cladding. It is a worthy investment since the tree can be harvested in five to seven years and then it regenerates from the stumps.
Food―Honey can be produced from the flowers (most of the honey from China comes from the Paulownia tree), tea from the leaves and the flowers can be eaten. The tree is, as just said, a melliferous plant [
Fodder―The big leaves, with high values of proteins, can be used as food for animals.
According to the interesting properties of Paulownia just described against pollution, a thorough search has been made so as to identify other studies which suggested the use of this tree for improving the air quality by many of the dangerous emissions which pollute the atmosphere. The only case we found is related to a Russian company, called “Environmental Investment” [
The ideal climatic and soil conditions for growing Paulownia are listed hereafter [
Temperature―For the new selected varieties of Paulownia, the suggested range is between −24˚C and 45˚C. The original ones adopted only to milder climates, as previously said.
Rainfalls―Soil and air humidity are very important for growing Paulownia. The suggested yearly average rainfalls should be above 800 mm. Insufficient watering slows the growth but does not kill the plant. For optimal growth, during the first months of growth, it is crucially important to water each plant with 20 litres per week.
Wind―Paulownia needs to be planted in areas where winds are not stronger than 28 km/h, since wind is dangerous for young plants.
Altitude―The ideal height is about 700 - 800 m, especially to be easily reached by vehicles, but Paulownia well adapts up to 2000 m.
Aspect―The best aspects are South, South-West and South-East, i.e. the areas with more solar exposure.
Soil PH―The soil PH should range between 5 and 8.9. In this analysis the range has been selected between 5.5 and 8, as suggested by other more stringent requirements [
Soil texture―Paulownia is a highly adaptive species and grows well on many types of soils. However, the most appropriate and recommended soils are light, well drained and sandy soils with or without slopes. Clay and soaked soils must be avoided. Soils with more than 25% of clay and porosity under 50% are not recommended.
Soil Depth―Young Paulownia plants grow well when the soil depth is at least 1.5 - 2 meters.
Soil Salinity―Paulownia does not tolerate salinity over 1%.
Soil OC quantity―Soil carbon is present in two forms, inorganic an organic. Organic Carbon, indicated with OC, represents about 60% of the organic substance in soils and it has a positive influence on many soil properties and it can be found in its first decimetres. It allows the aggregation and stability of soil particles and improves the soil fertility by incrementing the microbic activity and the availability of nutritive elements such as azote and sulphur. The minimum level of OC for an acceptable soil is 1% [
Air pollution is defined as the “presence in the air of some substances at such levels to cause negative effects on men and animal health, environment and cultural heritage” [
huge metropolises, is a country with the highest rates of air pollution, but recent policies are oriented toward green solutions; in fact, this new project is commissioned by Liuzhou Urban Planning Municipality. The Italian architect Stefano Boeri [
The territory taken into account in this paper is the Province of Bergamo [
In a wide part of the Lombardy region and in the whole Padana Plain, like other Italian and European regions, the air quality is poor; it is certainly better than in the past years, since some dangerous pollutants have nearly disappeared, but others are now reaching high levels, such as particulate matters (PM10 and PM2.5), azote oxides (NO2) and ozone (O3).The causes can be found in the high level of urbanization and industrialization of the territory. Also the geographical and climatological conditions are not favourable, being the Padana Plain surrounded by mountains and characterized by light wind and high atmospheric stability. The situation is also aggravated by our planet climate change which, in
the Lombardy Region, causes less winter rainy days, which can clean the atmosphere mostly from the particulate PM10 and PM2.5, and provides more summer sunny days, this way improving the formation of all the pollutants favoured by the solar radiation [
The work developed so far has aimed at identifying the best places to grow the Paulownia tree in the Province of Bergamo, according to the criteria described above.
They are as follows:
Elevation―not above 800 m; actually, Paulownia can adapt well up to 2000 m, but it has been decided to set this lower threshold because the plantations would be easier to reach and, most of all, since the aim of the research is to find the best fitting areas to grow these trees so as to fight air pollution and, as it is well known, pollution reaches the highest values in the plain and hills, but not so much at higher altitudes, i.e. the mountain regions.
Aspect―South, South East and South West areas.
Rainfalls―more than 800 mm per year. The results will prove that the minimum quantity is by far exceeded for the Province of Bergamo and for this reason this layer will not be considered for the final analysis.
Temperature―since the suggested range is between −24˚C and 45˚C and in the Province of Bergamo the temperature never exceeds this value, this factor has not been taken into account.
Wind speed―not over 28 km/h. For this reason, the wind map has been developed for the Province of Bergamo, as it will be later explained, but the results will confirm that wind is not an issue in the selected area.
Soil texture―loam, sandy loam and silt loam soils are suggested. Besides the soil texture requirement, also the soaked soils must be avoided and for this reason also a new layer has been derived by applying the union tool, in ArcMap, to the shapefiles: areas at high vulnerability for water resources, flood and outflow prone areas and the PAI (Plan for hydrogeological asset of the Po basin) layers (A, B and C brackets) which show the borders of the Po river and its main tributaries. In this case, only the C bracket has been used, since it outlines a wider area, around the A and B ones, prone to flooding.
Soil PH―between 5.6 and 7.9.
Soil depth―more than 1.5 m.
OC quantity―minimum 1%.
Salinity - the tree needs soils with salinity non above 1%; for this reason, the information about salinity in the Lombardy region has been derived from the ERSAF (Regional Agency for the Services to Agriculture and Forests) website [
ERSAF, in the Lombardy region there are no saline soils nor zones prone to salinization risk. The level of salinity in the map is measured in mS/cm, which is the electric conductivity in millisiemens per centimetre, and not in %, but the figure well shows what just said and, for this reason, salinity has not been taken into account, since in this region this is not a problem.
Land Use―It has also been decided to take into account the DUSAF (Agriculture and Forest Soil Destination of Use) 4.0 land use shapefile, so as to focus the search only in areas with specific land use requisites that will be described later.
The two following listed subjects have been analysed, as possible criteria to identify the best fitting areas, but then have been discarded for the reasons explained:
Slope―the tree grows independent of the terrain slope.
Geology―at first it had been thought to discard calcareous terrains, by selecting them in the shapefile Geology of the Province of Bergamo, since it is known that usually many trees do not usually grow well here for the poorness of nutrients in the soil, but the Paulownia tree does not mind calcareous areas.
According to the criteria selected above, all the layers, useful for data processing, have been downloaded from the Lombardy Geoportal [
The rainfall amount (mm) and wind speed (m/s) maps cannot be found in the Geoportal. For this reason, a selection, collection and processing work has been carried out, at last providing two raster maps useful for the final processing: one average rainfall map and one average wind speed map in the Province of Bergamo. The final maps are the result of an average calculation in the decade 2007-2016, for the rainfalls, and only in the year 2016-2017 for the wind speed. The lengthy procedure has already been adopted and described by the author [
1) selection of a suitable number of ARPA Lombardia [
2) downloading of the corresponding Excel files [
3) displaying of the stations and their values in Esri [
10.4 and creation of the corresponding shapefiles which have been then interpolated with the IDW technique through the Spatial Analyst Interpolation tool, this way providing one wind speed raster, for the year under examination, and ten rainfall rasters for the selected decade, all at 10 × 10 raster resolution and in the WGS84 UTM Zone 32N reference system. The best choice would have been between Splines and IDW, but the literature shows that IDW seems to provide slightly better results than Splines [
4) clipping of these layers, which extend over an area larger than the territory under investigation, with the Province of Bergamo shapefile through the Spatial Analyst Extract by Mask tool, this way providing the final raster wind speed map in the year 2016-2017 (
Since the wind speed map (
In this step, the ArcGIS Buffer tool has allowed to create a 50 m buffer area around the features describing the prone to floods (soaked) terrain in the Province of Bergamo. The selected buffer distance is quite large, but it has been decided to set a more stringent condition and for this reason it has seemed a proper compromise. The other requested shapefiles, describing the soil depth, PH, OC quantity and texture, have been acquired, in ArcMap, by a selection of attributes analysis of the soil map layer of the Province of Bergamo.
First of all, all the shapefiles have been converted to raster ones at the same 10 × 10 cell size as the rainfall and wind maps. The Aspect raster has been derived from the DEM one. According to what just said, the final selected layers are listed here: DEM Height, DEM Aspect, Soil texture, Soil PH, Soil OC quantity, Soil depth, Buffer of soaked areas and Land Use, for a total of 8 files. These are all raster layers related to the Province of Bergamo territory in WGS84 UTM Zone 32N coordinate system and at the same 10 × 10 resolution. At this point, all these files have been reclassified, according to some selected parameters, or range of values, as illustrated in
Layer | Reclassification attribute |
---|---|
Buffer of soaked areas | Buffer distance > 50 m =1 Buffer distance < 50 m = 0 |
Soil PH | PH values from 5.6 to 7.9 = 1 Other PH values = 0 |
Soil OC quantity | OC quantity > 1% = 1 OC quantity < 1% = 0 |
Soil Useful depth | Useful depth > 1.5 m = 1 Useful depth < 1.5 m = 0 |
Soil Map | Soil texture: loam, sandy loam, silt loam = 1 Other textures = 0 |
Land Use | Some selected descriptions of land cover = 1 Others = 0 |
DEM Height (m) | DEM Aspect° |
---|---|
Height < 800 m = 1 | ?1 ( Flat areas) = 0 |
Height > 800 m = 0 | 0 - 67.5 (N/NE) = 0 |
67.5 - 112.5 (E) = 0 | |
112.5 - 157.5 (SE) = 1 | |
157.5 - 202.5 (S) = 1 | |
202.5 - 247.5 (SW) =1 | |
247.5 - 292.5 (W) = 0 | |
292.5 - 360 (NW/N) = 0 |
the woods already have trees, to be preserved, hydric lands, such as rivers and lakes, are not advised for the Paulownia growing and urban areas do not have many useful places but parks and gardens. This way, for now it has been decided to keep the existing vegetation in woods, parks and gardens, while checking the possibility to replace ill and dead trees and the availability of free plots of land where to plant the Paulownia trees. Also croplands could be examined so as to find some more available terrain.
The final raster processing has been performed with the Spatial Analyst Map Algebra ArcGIS Tool, as explained in Equation (1), and it has allowed to identify the optimal areas for growing the Paulownia tree in the Province of Bergamo.
PaulowniaTreegrowing = ∏ 1 8 Re classifiedRasters i (1)
The final raster is function of all the 8 reclassified raster layers (i.e. Reclassified DEM Height, Reclassified DEM Aspect, Reclassified Buffer of Soaked Areas, Reclassified Soil Map, Reclassified Soil PH, Reclassified Soil Depht, Reclassified Soil OC Quantity, Reclassified Land Use) which are multiplied together in the Raster Calculator.
The result of Equation (1) is illustrated in
At this point, it has been decided to examine the air quality condition in the Province of Bergamo [
According to the European and Italian low, each region has the power to divide its territory in zones and agglomerations, in which the object and limit values of the air quality must be checked [
According to the law, the Lombardy territory is divided in areas homogeneous for the air quality evaluation [
1) Urban Agglomerations (Agglomeration of Milan, Agglomeration of Bergamo and Agglomeration of Brescia),
2) Zone A: flatlands with high urbanization,
3) Zone B: flatlands,
4) Zone C: rocky chains (Prealps, Apennine and higher mountain),
5) Zone D: valley bottom.
For the C Zone there is also a further subdivision in C1 (Prealps and Apennine) and C2 (higher mountain), for Ozone (O3) evaluation.
By law, it has also been introduced a zone, named Band 1, where special limits must be observed; they refer to vehicles traffic flow and the localization of power supply and waste management plants [
course, is equal to the Agglomeration of Bergamo.
It has then been decided to concentrate only on the commons in the Province of Bergamo belonging to the so called Band 1 and to analyse the pollutants PM10 and PM2.5 levels.
Particulate matter (PM) [
Heating, traffic, agriculture, etc. are the main sources of particulate pollutants.
They are classified as highly dangerous for human and animal health and they are the cause of the rising number of pulmonary and cardio circulatory diseases, as well as of cancer.
In April 2008, Europe has adopted new law measures (2008/50/EC) which include the limits of the air quality and pollutants These recommendations, in Italy, are represented by the 13 August 2010, n.155 law. These law values and limits [
On the other side, industrialization, the changing in land use destination (such as deforestation) and human impact are the causes of the fast accumulation of CO2 in the air, which in turn leads to global warming, the melting of polar ice, oceans acidification, diseases, etc. (
It is known that Carbon Dioxide is also the cause of the presence of particulate pollutants in the air, due to fossil fuel [
Air Pollutant | Daily Limit | Yearly Limit |
---|---|---|
PM10 | 50 µg/m3 for no more than 35 days a year | 40 µg/m3 |
PM2.5 | - | 25 µg/m3 (since 2015) |
The choice to concentrate here only on Particulate Matter PMx and CO2 is due to the fact that the Paulownia tree, as said before, can contribute to lower their dangerous levels in the atmosphere, with the aid of its big leaves.
ARPA Lombardia has more than 150 stations [
For this project, the PM10 and PM2.5 data have been downloaded for each common, in the Province of Bergamo, belonging to the so called Band 1 (for a total of 37), previously described, in the year 2017 [
By law, as said before, the annual limit values for PM10 is 40 µg/m3 and 25 µg/m3 for PM2.5, while the daily limit of 50 µg/m3 shouldn’t be exceeded for more than 35 days a year only for PM10 [
The data have been downloaded from the ARPA Lombardia website: excel files, with daily values of Particulate matter (both PM10 and PM2.5) for the Band 1 commons, which are 37 in the Province of Bergamo, in the year 2016-2017.
Their yearly average has been calculated and then edited, in ArcMap, in the attribute table of the shapefile of the 37 commons, adding one column for PM10 and another for PM2.5 values. Also another column has been created, which lists the number of days, for each common, when PM10 values have exceeded the daily limit of 50 µg/m3.
Figure15 shows that the higher average PM10 value, in the Band 1 commons, is about 36.43 µg/m3, which is under the annual law limit of 40 µg/m3, while, for PM2.5, Figure16 shows that the annual limit of 25 µg/m3 is exceeded in even 27 commons, while in 3 it is in the range 23 - 25 µg/m3 and in 7 in the range 21 - 23 µg/m3.
Even if the results for PM10 seem to be encouraging, it has been decided to take into account the number of days in a year in which the daily limit of 50 µg/m3 is exceeded, for each common, which should be under 35. It is possible to see that only one common respects this limit, while in all the other 36 the number of recommended days is exceeded.
they are the cause of many diseases for all the people who breathe this polluted air.
No specific analysis has been carried out for Carbon Dioxide (CO2) levels in the Province of Bergamo, but of course CO2 emissions need to be taken into account by default, since they are an extremely important world issue and the main cause of air pollution concerns for our planet.
Starting from the results just achieved, it has been decided to look at the disposition of the best fitting areas, previously found, in respect to the Band 1 zone.
For this reason, the final raster layer has been converted, in ArcMap, to a polygon one with only the areas with value equal to 1, which means only the best fitting ones. This layer has then been displayed together with the Band 1 shapefile of the commons in the Province of Bergamo. Since these commons can be enclosed in a square box with the side of about 33 km, it has been set a distance equal to its 10%, i.e. 3 km. Then, through a selection by location tool, the best fitting areas, within this distance, in respect to the Band 1 shapefile, have been selected (in cyan in
As previously said, each acre of trees can absorb 13 tons of harmful CO2 gases and particles from the air each year [
Deciding to take into account, as second step, also the commons of the A Zone, which means the flatlands with high urbanization, performing the same procedure just described, other best fitting areas have been selected (
The employment of these new areas could obviously contribute to improve the quality of the air in the Province of Bergamo, in fact they could absorb, according to the numerical passages just described for the Band 1 commons, about 2795 tons of CO2 and particles in a year and release very high quantities of O2 per day.
Of course there are some best fitting areas left, of about 3.69 km2, which are outside the Band 1 and A Zone, and they belong to the less polluted zones in the Province of Bergamo; they could be considered as a contribution against pollution, in a final step, after fulfilling the first and more necessary two steps just described before.
According to the idea of finding the best areas for growing the Paulownia tree in the Province of Bergamo, a specific GIS analysis has been carried out to select the most favorable soil and climate conditions. The achieved results show that 7.5649 km2 of terrain could be harvested with these trees whose big leaves have the capability to absorb great quantities of CO2 and particles and release large amounts of Oxygen in the air; in fact, as previously said, each acre of trees can absorb 13 tons of harmful CO2 gases and particles from the air each year and each tree can release about 13 lbs of oxygen per day [
The previous analysis has allowed to identify the best fitting areas for growing the Paulownia tree in the Province of Bergamo.
They are not wide, but, as it has been said before, less stringent conditions could be taken into account and also other different land use areas could be investigated and evaluated as possible candidates, such as park and gardens in the urban areas, where it could be advised to plant these trees on available terrain. This could really become a useful approach which would directly contribute to absorb pollutants, provide shade and lower temperature in the cities, where traffic and urbanization reach high levels, while displaying their beautiful purple flowers and big green leaves.
Also the enlargement of the soil PH range, selected here, could be considered.
The results, achieved with the analysis just performed, also show that the best places are well distributed in the zones where air is more polluted, which means the A Zone and also Band 1, where there are more rigid law limitations against pollution [
Anyway, this is a good start and represents a new contribution against air pollution.
Some other interesting properties of the Paulownia trees could also be considered, such as their capability to consolidate terrains with erosion and therefore areas prone to landslides, as well areas prone to hydrogeological risk. In this case, it would be good to raise the altitude limit, considered here, and to take it up to 2000 m, where the Paulownia trees can still adapt and live, and also resize the buffer area of 50 m, previously selected around the soaked areas, to a smaller one.
Thanks for his original idea are due to the GIS course student, at the University of Bergamo (Engineering), Giuseppe Traettino who is going to develop the subject, here described, in his degree thesis, and also to Professor Maria Sole Brioschi for her kind and useful advice.
Marana, B. (2018) A Green GIS Solution against Air Pollution in the Province of Bergamo: The Paulownia Tree. Journal of Geographic Information System, 10, 193-218. https://doi.org/10.4236/jgis.2018.102010