Uganda aspires to become “a transformed society from a peasant to a modern and prosperous country within 30 years”. This aspiration and the targeted steps to be taken to achieve it are laid down in a document titled Uganda Vision 2040. Industrialisation is considered to be one of the avenues to use to achieve this Vision, despite the fact that the country has made a number of efforts to promote industrialisation in the past, which have not yielded positive results. Reviewed here are the efforts that have been made to this regard since its independence and short falls highlighted. These efforts are compared with the East Asian countries’ efforts towards industrialisation to note what polic y makers and investors can do better in order to have industrialisation work for a country like Uganda. The comparison is based on the fact that these countries were at almost the same economic level of development in the 1960s and therefore there is a need to learn lessons of what was done differently. The country needs to develop a stepwise approach to industrialisation that can guide all efforts towards a common agenda.
Industrialisation is where a country moves from an economy dominated by agricultural output and employment to one dominated by manufacturing [
Uganda’s Vision 2040 [
Vision 2040 states that review of the development paths of developed and emerging economies shows that, except for a few oil-exporting countries, there is a strong positive correlation between industrialisation and rapid development. A strong and competitive industrial base is important to create employment, advance technology and create a resilient economy. Industrialisation also offers more export earnings, wider tax base, increased purchasing power, increased integration with agriculture, product diversification, greater efficiency, and technical modernisation and higher productivity throughout the whole economy [
Furthermore, the second National Development Plan, NDPII [
Since independence, Uganda has made efforts of capitalising on industrialisation to propel the economy to middle income status and eventually to a first world economy. According to a UNIDO report 2007, Uganda was among the few African countries that had a thriving industrial sector prior to independence. There were small and medium, as well as large-scale industries, and their development was boosted with the establishment of the Uganda Development Corporation (UDC) in 1952. UDC was charged with the responsibility of promoting the establishment of industries, including joint ventures, negotiating finance and attracting direct foreign investment, as well as promoting the establishment of industrial research institutions and related support services (UNIDO, 2007).
The report notes however that most of the established industries produced consumer goods and thus failed to create the necessary meaningful forward and backward linkages with other sectors of the economy and more so the agricultural sector, which employed the biggest percentage of the population. Furthermore, the industries relied heavily on foreign raw materials and technology and did not alleviate the unemployment problem. Over the years, the industries failed to create the desired impetus for economic take off for national development.
With the stabilisation of the political environment in the 1990s, the government put in place a number of measures to boost the industrialisation drive. These included; the Industrialisation Policy and Framework (1994-1999), development of industry and industrial support institutions like Uganda National Bureau of Standards, Uganda Industrial Research Institute, Uganda National Council for Science and Technology, Uganda Investment Authority, among others. These measures and institutional capacity building paid off such that between 1992 and 1998 annual production grew from 11.8% to 17%, industrial GDP contribution grew from 10% to 20% and the number of industrial establishments increased from 1320 to 11,968 (UNIDO, 2007).
To capitalise on the achievements, these measures were followed with other policies in the 2000s; Medium Term Competitiveness Strategy for the Private Sector (MTCS)―2000-2005, 2005-2009, Poverty Eradication Action Plan (PEAP)―2004-2008, the National Industrial Policy―2008-2018, and the National Industrial Sector Strategic Plan 2010/11-2014/15.
The interventions used to boost industrial development before 2000 saw industry contribution to GDP grow from 10% between 1980 and 1990 to 20% between 1990 and 2000 (UNIDO Report, 2007). However, interventions applied thereafter to boost industrial development did not register as much success as industrial contribution to GDP in the years 2000-2010 oscillated between 22% - 24% (UBOS, 2010). According to Bevan, et al., 2003, this level of industrial contribution to GDP is below the targeted mark of 35% for countries aiming to achieve middle-income status. It can be noted that Uganda’s industrial growth somehow stagnated over the last 15 years with its contribution to GDP currently standing at 20.4% [
As Uganda is working towards becoming a developed economy by 2040 and looking at industrialisation as one of the avenues to achieve this, this paper reviews the industrialisation efforts that have been made before, comparing these with the progress made by the east Asian countries and drawing lessons to aid the country make the right decision to realise the benefits of industrialisation.
Uganda’s industrial sector comprises mainly of manufacturing, mining and quarrying, construction, and utilities (electricity and water supply) sub-sectors, whose industries are categorized into formal and informal.
The manufacturing sub-sector is composed of food processing, manufacture of beverages and tobacco, textiles clothing and footwear, paper and printing, chemicals, petroleum and other chemical products, non-metallic minerals, basic metals and metal products among others. Of these, food processing, beverages and tobacco industry, saw milling, paper and printing, bricks and cement, steel and metal products, and textile clothing and footwear industry, comprise the biggest share [
The mining activities include mining of iron ores and non-ferrous metals, quarrying of stones, sand and clay as well as activities such as extraction of salt. The construction sub-sector includes general construction and refurbishment of structures, civil engineering works, plumbing, installations, plastering and glazing, among others.
Currently the industrial sector’s contribution to GDP is 19.8%; with mining and quarrying contributing 0.7%, manufacturing 9.2%, electricity 0.8%, water 1.7% and construction 7.4% [
It can be observed that the industrial sector contribution to GDP remained stable around 15% in the 1960s and early 1970s before sharply falling to its lowest of 5% from around 1975 to 1980. Significant increases were realised between the years 1980 to 1985 from about 5% to 15%. There was also significant growth from 1994 to 2001, with industry contribution to GDP rising from around 14% to 23%. Having made its biggest contribution to GDP of 27% in 2008, the sector’s contribution thereafter fell to around 20% since 2010. Industrial contribution to
GDP has stagnated around 20% since 2010.
From 1985 to 1990, industrial contribution to GDP remained constant at 12% and increased to 13% from 1990 to 1994. It can be noted that there was no growth in the sector over a period of 10 years. This could be explained by the effects of the impact of the political instability that the country experienced in the 1980s. The growth in industry from 1994 to 2001 can be explained by the extensive efforts the government put in to revive the sector as earlier highlighted. In this period, the industrial sector grew at an average rate of 11.5% per year.
However, the interventions that have been employed by government to boost the sector since 2001 to date have not registered as much impact on the sector as those employed between 1990 and 2001. The average industrial growth between 2002 and 2015 has been 8%.
It can be noted from
Jobs are essential for Uganda’s development because they determine the living standards of individuals and households [
The GDP contributions of the major subsectors that make up the industrial sector in Uganda are as highlighted in
From the available data, it can be noted from
The slowdown in industrial development in the country that was observed starting from the late 2000s to date may be attributed to a number of factors among which is the changed priorities and demands of the government and economy respectively. This thus led to the slowdown of the construction subsector and eventually industrial contribution to GDP. Probably the principles behind the policies that were applied in the 1990s to boost economic development that focused majorly on reconstruction have not been modified much beyond 2000 to now focus on driving industrialisation through boosting manufacturing.
The manufacturing subsector has a high potential for the following: enhanced economies of scale and factor productivity due to technological upgrade; deeper, more dynamic and stronger forward and backward linkages not only within the sector itself (upstream and downstream activities), but also with other sectors; and greater diversification into a variety of economic activities [
Therefore, there is a need to develop a clear strategy, to guide all players on the path to take as the country works towards achieving Vision 2040.
On a number of occasions, Uganda’s level of economic development was compared to that of the East Asian countries like Singapore, Malaysia and South Korea and expected to be at this level. This has been the case because these countries were considered to be at almost the same level of economic development in the 1960s. The per capita income of these countries were in the range of USD 130 and 400 [
It can be observed from
The GDP per capita for the four countries over the time period is also given in
Though the GDPs of Singapore and Malaysia are at the same level, the small
population size and land mass of Singapore allows its citizens to have a higher standard of living, which is even better than that of South Korea. The growth in population numbers of the four countries together with the GDP per capita growth over the years are given in
Uganda’s slow pace in economic development is partly explained by the political instabilities that the country experienced between 1966 and 1986, yet the East Asian countries, to some extent, did not experience such instabilities. This accounts for 20 years of destruction of infrastructure and systems in Uganda that would have delivered on the desired inputs to economic development. If these 20 years are offset from Uganda and the yard stick starts at probably 1990, it implies that 20 years down the road (2010) the nation’s economic development should at least be at 75% the level (given that they were not at the same level of development) where the East Asian countries were in 1980, especially with Malaysia, which has similar characteristics to Uganda. However, the case presented is very different.
This may imply that even if Uganda had not experienced political instability over the 20-year period, it might not have been as developed as the East Asian economies (or even half way their current GDP). This therefore may point to the strategies that have been drafted by the various governments as far as driving Uganda’s economy to a developed status is concerned. There is therefore a great need to examine the strategies taken by Uganda to boost economic development, with lessons from those steps taken by the East Asian countries as the country looks at paving a way to achieving Vision 2040.
Analysis of the development paths of the East Asian countries can be made and some lessons drawn on how to drive Uganda’s economy to middle income status especially through industrialisation. From
From
GDP per capita (Current USD) | Population (million) | Land area (sq. km) | |||||||
---|---|---|---|---|---|---|---|---|---|
1960 | 1980 | 2000 | 2015 | 1960 | 1980 | 2000 | 2015 | ||
Uganda | 62 | 99 | 260 | 675 | 6.7 | 12.5 | 23.7 | 39.0 | 199,810 |
Singapore | 427 | 4927 | 23,792 | 52,888 | 1.6 | 2.4 | 4.0 | 5.5 | 670 |
Malaysia | 234 | 1770 | 4004 | 9766 | 8.2 | 13.8 | 23.4 | 30.3 | 328,550 |
South Korea | 155 | 1778 | 11,947 | 27,221 | 25 | 38 | 47 | 50 | 96,460 |
Uganda’s case, the service sector was making a significant contribution to GDP since 1960. But since the service sector employs mostly highly skilled personnel and does not offer a big number of jobs, the industrial sector was boosted to provide the needed employment and its contribution to GDP increased from 21.2% in 1960 to 37.8% in 20 years in 1980. In the subsequent years, the industrial contribution to GDP was maintained at an average of about 34%.
From
Uganda’s economy may be deemed to have been related to those of South Korea and Malaysia in the 1960s in a way that both had the agricultural sector and the service sector as the biggest contributors to GDP,
From
Secondly, it can be noted that as Malaysia and South Korea moved out of the agrarian economy, they equally boosted their industrial sector to replace the vacuum that was being created by the declining agricultural sector. On the other hand, as Uganda’s agricultural sector declined over the years, it industrial sector did not get the necessary boost to take up the vacuum that was being created in the economy as was the case for Malaysia and South Korea. This has not changed to date. This could probably be one of the reasons why Uganda’s economy did not take off, and still hasn’t, as those of its counterparts in East Asia.
Though Uganda’s industrial sector contribution to GDP since 1990 to date was growing at a faster rate, 9.17%, than that of Malaysia, 5.32% and Singapore, 5.79%, it never made any major impact to push the economy forward. This could probably be due to the fact that Uganda’s industrial sector was driven by construction,
Agriculture (%) | Industry (%) | Services (%) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
1965 | 1980 | 2000 | 2015 | 1965 | 1980 | 2000 | 2015 | 1965 | 1980 | 2000 | 2015 | |
Uganda | 52.3 | 72.0 | 29.4 | 24.7 | 13.5 | 4.5 | 22.9 | 20.4 | 34.2 | 23.5 | 47.7 | 54.9 |
Malaysia | 31.0 | 23.0 | 8.6 | 8.4 | 29.6 | 41.8 | 48.3 | 39.1 | 39.4 | 35.2 | 43.1 | 44.3 |
South Korea | 39.4 | 15.1 | 4.4 | 2.3 | 21.3 | 34.2 | 38.1 | 37.9 | 39.3 | 50.7 | 57.5 | 59.7 |
economy as it connects with other sectors and improves their productivity. Furthermore, jobs are created that improve the livelihoods of the people and increase the spending power.
It can be observed that the manufacturing subsectors of Singapore, Malaysia
and South Korea were boosted over the years to levels beyond 30% contribution to industry but that of Uganda remained below 10% over the years.
Therefore, it can be noted that if Uganda is to require industrialisation to drive economic development towards achieving Vision 2040, there is a great need to boost the manufacturing sector so as to harness its numerous benefits; create linkages that will boost the other sectors especially agriculture that employees 70% of the population, turn the existing minerals into high value commodities and create the highly-needed employment. Currently, Uganda’s manufacturing sector consists predominantly of last-stage (end-product) assembly and raw material processing, a high share of which is food processing [
In order to achieve the economic growth that the East Asian countries realised through industrialisation, a number of strategic interventions were undertaken over a period of years. According to Pundy Pillay, 2010 [
・ Boosted the development of a vigorous, export-oriented manufacturing industry with a progressive shift towards high technology;
• 1/3 (35%) of the civilian labour force is employed in manufacturing
• 2/3 (64%) are in the service sector
・ Has a current economic policy that favours a continued strong manufacturing sector with higher technological base, rather than a significant shift towards the service sector.
• Expansion of knowledge based industries,
• High and medium technology and knowledge intensive manufacturing
・ Invested in education and raised a highly educated labour force. South Korea’s abundant labour compensated for a lack of natural resources and allowed sustained industrial financing that, in turn, helped increase labour productivity and growth in the economy (Shin-Haing Kim, 2007) [
Specifically, South Korea introduced interventions and policies that drove industrial growth from one level to the next gradually, depending on the prevailing national conditions and needs, as highlighted in
A Rostowian take-off of the Korean economy was possible through risk taking by the state led by President Chung-Hee Park, in collaboration with the early chaebol founders. Joint risk taking by the state and business connected to the credit supply, which was controlled by the government. From 1960 to 2004, an alternate sequence of financial repression and financial liberalisation occurred at approximately decadal intervals.
Successful growth performance to the state, entrepreneurs, a highly qualified workforce, and well-trained bureaucrats and firm managers were the factors that contributed to the transfer of technology and applications from contacts with foreign marketing personnel, engineers and scientists, and helped the market open. Acquisition of knowledge and know-hows through spill-over effects from imported capital goods and intermediates could be another factor which contributes for transfer of technology.
For the case of Singapore, the interventions taken at defined intervals are highlighted in
Malasyia undertook steps that are highlighted in
Some general observations can be made from the interventions that were applied by the East Asian economies in their different stages of development:
1) At the on-set of the industrialisation drive, sequencing of industries was key; they concentrated on labour intensive, light manufacturing industries targeting the resources available to them, e.g. agricultural industries for Malaysia, in order to provide employment to their citizens;
2) They focused on educating their population, equipping them with skills that were directly related to boosting industrial development;
3) Focused on laying the ground for the establishment of heavy industries that were deemed to be backbone industries for industrialisation e.g. iron and steel industry, fertiliser factories for boosting agriculture;
4) As these countries moved from the agrarian economy, they equally invested in industrialisation to fill the gap that was being created in the economy by agricultural decline;
5) They kept their service sector strong and invested in industry to enable it drive the economy; in industry, the manufacturing sub-sector was boosted to take the lead in driving economic development;
Period | Interventions |
---|---|
1960s | ・ Promotion of export and import-substitution industries; starting with subsistence agriculture (rice) and labour-intensive, light manufacturing sectors (textiles, flour mills, breweries and bicycles) ・ Technology obtained through foreign licensing and adapted for domestic production o Vocational high schools―training in craft skills for the growing labour-intensive light industries. o College admission quota was strictly regulated by the government―based on the analysis of the demand for human resources ・ 2 five year economic plans focused on establishing industries to supply basic industrial materials (establishing an iron and steel company, oil company, fertiliser factory) ・ Establishment of special purpose banks |
1970s | ・ Industrial policy moved towards introducing heavy manufacturing industries (e.g. chemical and ship building) ・ Introduced policies to further improve technological capabilities o improved quality of technical and vocational training―supply technicians for the heavy and chemical industries o higher education―the government selectively expanded the enrolment quotas in the fields of engineering, natural sciences, business and commerce, and foreign languages ・ More special purpose banks established |
1980s | ・ Efforts to ensure a market-conducive environment by deregulating various sectors and liberalising trade and financial markets ・ Re-organisation of industries e.g. Hyundai was advised to make automobile manufacturing its core industry, Samsung was told to concentrate on semiconductors, LG was directed to focus on petrochemicals and yield its semiconductor business to Hyundai, the electrical generator business was assigned to Daewoo. ・ Tight monetary and fiscal policies kept inflationary pressures under control ・ Expanded higher education; investing in indigenous research and development―establishing a National Research and Development Programme o government abolished college entrance examinations and expanded educational opportunities for higher education; renovating school facilities, introducing incentives for teachers |
1990s | ・ Joined the Organisation for Economic Cooperation and Development (OECD) ・ Economic deregulation and democratisation ・ More loans extended to the general public than the chaebols (a large business conglomerate, typically a family-owned one) as was the case before ・ Public investment in social overhead capital for schools, public libraries, and highway construction gradually became more market based ・ Pursued high value-added manufacturing by promoting indigenous high-technology innovation ・ Government initiated diversification and specialisation of higher education institutions to accommodate the diverse needs of society ・ Financial market reforms ・ Modern and accessible information infrastructure o Harnessing the potential of science and technology; by 2000, 144 major cities and regions were connected by high-speed broadband networks through fibre-optic cables and by June 2004, 66% of the population had access to the internet ・ Expansion of research and development ; created a knowledge-based economy o R & D expenditure increased from US$9 million in 1969 (73% public) to US$24 billion in 2006 (75% private). o The number of researchers increased from 5337 in 1969 to 256,598 in 2006; 7% in government, 26% at university and 68% in private sector. o every university had a university-industry liaison office supported by government funds (promoting joint research) |
Period | Intervention |
---|---|
1960s &70s | ・ Government policies: o to promote growth by attracting foreign direct investment; attract global multinational corporations as vehicles to achieve industrial growth o create jobs and expand productive capacity o shift away from import-substitution in favour of export-led industrialisation ・ The government developed industrial land, put in place infrastructure facilities, reformed labour laws to promote industrial peace, and invested in basic education with emphasis on technical skills relevant to industrialisation. ・ Sound fiscal and monetary policies ensured macroeconomic stability and underpinned investor confidence |
1980s | ・ Industrial restructuring by focusing on high-tech manufacturing and high value-added services o emergence of strong clusters in higher value-added electronics, petrochemicals, component and precision engineering (Singapore became the world’s leading producer of hard disk drives―an early form of memory storage used in computers at the time) ・ Computerisation of the civil service―helped to kick-start the info-communication services industry |
1990s | ・ Structural reforms to: o enhance wage flexibility in the labour market; o tap more decisively into regional markets for trade and outward investment; o step up the pace of industrial upgrading; o promote innovation, enterprise, and entrepreneurship in the economy; and o liberalisation of various services sectors such as finance, telecommunications, and utilities. |
2000s | ・ Liberalisation of the insurance and securities industries ・ Opening up the domestic banking industry to foreign competition ・ Opening up the entertainment industry |
Period | Intervention |
---|---|
1960s | ・ Adopted development planning ・ Tax holidays, guarantees (to foreign investors) of freedom to repatriate profits and capital ・ A modest degree of tariff protection was granted. ・ The main types of goods produced were consumer items such as batteries, paints, tires, and pharmaceuticals ・ Replanting rubber trees; the government offered grants to owners, financed by a special duty on rubber exports ・ Land development to facilitate commercial agriculture; with schemes to open up large areas of about 40,000 hectares, which were then subdivided into 10 acre/4 hectare blocks for distribution to small farmers from overcrowded regions who were either short of land or had none at all. Financial assistance (repayable) was provided to cover housing and living costs until the holdings became productive. |
1970s-90s | ・ Exports of oil and natural gas ・ Introduced Industry and New Economic Policy with the following aims o to redistribute corporate equity so that the bumiputera (term to describe the Malay race and other indigenous peoples of Southeast Asia) share would rise from around 2 percent to 30 percent. The share of other Malaysians would increase marginally from 35 to 40 percent, while that of foreigners would fall from 63 percent to 30 percent. o to eliminate the close link between race and economic function (a legacy of the colonial era) and restructure employment so that the bumiputera share in each sector would reflect more accurately their proportion of the total population (roughly 55 percent). In 1970 this group had about two-thirds of jobs in the primary sector where incomes were generally lowest, but only 30 percent in the secondary sector. In high-income middle class occupations (e.g. professions, management) the share was only 13 percent. o To eradicate poverty irrespective of race. In 1970 just under half of all households in Peninsular Malaysia had incomes below the official poverty line. Malays accounted for about 75 percent of these. ・ Promoted export-oriented industrialisation (EOI) and set-up Free Trade Zones (FTZs); Firms locating there received concessions such as duty-free imports of raw materials and capital goods, and tax concessions, |
6) Imported capital goods and used them to develop technologies that could eventually produce them;
7) Imported technologies for industrial development and adapted them to suit their conditions and kept on improving on these to suit the changing trends of development (re-engineering);
8) Continuously improved their education system to supply the needed human resource at the various levels of economic development.
As Uganda is driving towards becoming a middle-income country and eventually a developed economy using industrialisation as a vehicle, there is a need to focus interventions, priorities and sequence reforms in an integrated manner. Some lessons can be learnt from the East Asian countries, which can inform the country’s next phase of interventions in boosting industrial development among which include:
1) Need to have policies and measures in place that support the growth of the existing manufacturing industries and the introduction of more light industries so as to provide employment to the existing labour force;
2) Introduce measures that support and boost agriculture and also light industries that process agricultural produce;
3) Lay a foundation for setting-up industries that serve as the foundation for the establishment of other industries e.g. the iron and steel industry, fertilisers industry for agriculture, among others;
4) Specify the skills that are needed at the various stages of industrialisation and inform the education system in terms of training technicians and professionals;
5) Plan for the establishment of incubation centres in different fields, science and technology parks so as to boost the area of innovation for introduction of new technologies that are tailored to the local specifications and needs and at the same time create more employment;
6) Identify the required infrastructural needs to support industrialisation and link these to the identified or set-up production zones in the country;
7) Strength the regional trade especially in products that Uganda has a comparative advantage e.g. agricultural produce and products;
8) Develop mechanisms that create and strengthen partnerships between research institutions and industry.
One of Uganda’s biggest constraints to sustainable industrialisation has been the lack of a guided-step wise approach; spreading too wide and touching almost everywhere and generating less impact in view of the constraints. It’s important to address this issue and also adopt an industrialisation agenda that will generate impact for the populace rather than push growth alone. As Uganda is driving towards becoming a middle-income country and eventually a developed economy using industrialisation as one of the avenues, there is need to focus interventions, priorities and sequence reforms in an integrated manner to boost the industrialisation agenda. There is need to present a practical pathway that will focus and sequence interventions in the industrial sector to guide its development so as to enable the sector make its contribution in transforming the economy. The country might need to consider formulating an Industrialisation Master Plan, which will harmonise the interventions and efforts of all stakeholders; private and public, to enable movement in one direction. This will help focus and target the industrialisation agenda of the country.
Muwanguzi, A.J.B., Olowo, P., Guloba, A. and Muvawala, J. (2018) Industrialisation as a Vehicle for Uganda to Achieve a 1st World Economy by 2040: A Review of Uganda’s Industrialisation Efforts. American Journal of Industrial and Business Management, 8, 496-513. https://doi.org/10.4236/ajibm.2018.83033