In this paper, a conjugate spectral problem and biorthogonality conditions for the problem of extended plates of variable thickness are constructed. A technique for solving problems and numerical results on the propagation of waves in infinite extended viscoelastic plates of variable thickness is described. The viscous properties of the material are taken into account using the Voltaire integral operator. The investigation is carried out within the framework of the spatial theory of viscoelasticity. The technique is based on the separation of spatial variables and the formulation of a boundary value problem for Eigen values which are solved by the Godunov orthogonal sweep method and the Muller method. Numerical values of the real and imaginary parts of the phase velocity are obtained depending on the wave numbers. In this case , the coincidence of numerical results with known data is obtained.
The study of the propagation of deformation waves in elastic and viscoelastic media is an important direction in modern wave dynamics. The main problem is the study of the dissipative (damping) properties of the system as a whole, as well as its stress-strain state. With the free propagation of waves, the dissipation reduces to the attenuation of free waves. The rate of damping quantitatively estimates the dissipative properties of the system: the greater the decay rate, the higher the dissipation [
We consider the visco elastic waveguide as an infinite axial х1 variable thickness (
∭ ν ( σ i j δ ε i j + ρ u i δ u i ) d x 3 d x 2 d x 1 = 0 ( i = 1 , 2 , 3 ; j = 1 , 2 , 3 ) (1)
where ρ-material density; ui-displacement components; σij and εij-components of the stress tensor and strain; h-plate thickness; V-the volume occupied by the body. In accordance with the hypotheses of Kirchhoff-Love
σ 12 = σ 23 = σ 33 = 0 , u i = − x 3 д w д x i , w ( x 3 , t ) = w . (2)
Neglecting in (1) the members of which take into account the inertia of rotation normal to the middle plane, will have the following variation equation:
∫ S d s ∫ − h 2 h 2 ( σ 11 δ ε 11 + 2 τ 12 δ ε 12 + τ 22 δ ε 22 ) d x 3 + ∫ S d s ∫ − h 2 h 2 ρ ∂ 2 w ∂ t 2 δ w d x 3 = 0 (3)
Based on the geometric relationships and relations of the generalized Hooke’s law, taking into account the kinematic hypotheses (2), the expressions for the components of the strain and stress tensor has the form [
ε i j = 1 2 ( ∂ u i ∂ x j + ∂ u j ∂ x i ) − x 3 ∂ 2 w ∂ x i ∂ x j , i , j = 1 , 2 ; σ 11 = E ˜ 1 − ν ( ε 11 + ν ε 22 ) ; σ 22 = E ˜ 1 − ν ( ε 22 + ν ε 11 ) ; σ 12 = E ˜ 1 + ν ε 12 , (4)
E ˜ n φ ( t ) = E 0 n [ φ ( t ) − ∫ 0 t R E n ( t − τ ) φ ( t ) d τ ] , (5)
where φ ( t ) -arbitrary function of time; ν -Poisson’s ratio; R E n ( t − τ ) -the core of relaxation; E 01 -instantaneous modulus of elasticity; we accept the integral terms in (5) small, then the function φ ( t ) = ψ ( t ) e − i ω R t , where ψ ( t ) -slowly varying function of time, ω R -real constant. Then, we replace of (6) approximate species [
E ¯ n φ = E 0 j [ 1 − Γ j С ( ω R ) − i Γ j S ( ω R ) ] φ
where Γ n C ( ω R ) = ∫ 0 ∞ R Е n ( τ ) cos ω R τ d τ , Γ n S ( ω R ) = ∫ 0 ∞ R Е n ( τ ) sin ω R τ d τ , respec-
tively, cosine and sine Fourier transforms relaxation kernel material. As an example, the visco elastic material take three parametric relaxation nucleus R Е n ( t ) = A n e − β n t / t 1 − α n . Here A n , α n , β n -parameters relaxation nucleus. On the effect of the function R Е n ( t − τ ) superimposed usual requirements inerrability, continuity (except t = τ ), signs-certainty and monotony:
R E n > 0 , d R E n d t ≤ 0 , 0 < ∫ 0 ∞ R E n ( t ) d t < 1.
Introducing the notation for points
М 11 = D ¯ ( ∂ 2 w ∂ x 1 2 + v ∂ 2 w ∂ x 2 2 ) ; M 22 = D ¯ ( ∂ 2 w ∂ x 2 2 + v ∂ 2 w ∂ x 1 2 ) ;
M 12 = D ¯ ( 1 − v ) ∂ 2 w ∂ x 1 ∂ x 2 , D ¯ = E ¯ h 3 12 ( 1 − ν 2 ) .
When R Е n ( t − τ ) = 0 , then D = E h 3 12 ( 1 − ν 2 ) . Here E is the modulus of elas-
ticity.
Integrating (3) in the strip thickness leads to the following form
∫ 5 ( M 11 ∂ 2 δ w ∂ x 1 2 + 2 M 12 ∂ 2 δ w ∂ x 1 ∂ x 2 + M 22 ∂ 2 δ w ∂ x 2 2 ) d s − ∫ s ρ h ∂ 2 w ∂ t 2 δ w d s = 0. (6)
Integrating twice by parts and alignment to zero, the coefficients of variation δ w inside the body and on its boundary and we obtain the following differential equation
∂ 2 M 11 ∂ x 2 + 2 ∂ 2 M 12 ∂ x 1 ∂ x 2 + ∂ 2 M 22 ∂ x 2 2 + ρ h w ¨ = 0 , ( w ¨ = ∂ 2 w / ∂ t 2 ) (7)
with natural boundary conditions:
{ ∂ w ∂ x 2 = 0 w = 0 ; x 2 = 0 ; l 2 (8)
{ ∂ w ∂ x 1 = 0 w = 0 ; x 1 = 0 ; l 1 (9)
The main alternative boundary conditions to them
{ M 22 = 0 ∂ M 22 ∂ x 2 + 2 ∂ M 12 ∂ x 1 = 0 ; x 2 = 0 ; l 2 (10)
{ M 11 = 0 ∂ M 11 ∂ x 1 + 2 ∂ M 12 ∂ x 2 = 0 ; x 1 = 0 ; l 1 (11)
For, we construct a spectral problem by entering the following change of variables
w = W ; φ = ∂ W ∂ x 2 ; M = ( ∂ 2 W ∂ x 1 2 + ∂ 2 W ∂ x 2 2 ) ; Q = ∂ M 22 ∂ x 2 + ∂ M 12 ∂ x 1 . (12)
Substituting (12) into (7) we obtain the differential equation of the system relatively sparse on the first derivatives х2 :
∂ Q ∂ x 2 + ∂ 2 M ∂ x 1 2 + D ¯ ′ ( 1 − ν ) ∂ 2 φ ∂ x 1 2 + ρ h ∂ 2 W ∂ t 2 = 0 ; ∂ M ∂ x 2 − Q − D ¯ ″ ( 1 − ν ) ∂ 2 W ∂ x 1 2 = 0 ; D ¯ ∂ φ ∂ x 2 − M + D ¯ ∂ 2 W ∂ x 1 2 = 0 ; ∂ W ∂ x 2 − φ = 0. (13)
And alternative boundary conditions х 2 = 0 ; x 2 = l 2 ;
φ = 0 or M − D ¯ ( 1 − v ) ∂ 2 M ∂ x 1 2 = 0 ;
W = 0 or Q + D ¯ ( 1 − v ) ∂ 2 φ ∂ x 1 2 = 0. (14)
and х 1 = 0 , х 1 = l 1 ,
φ = 0 or M − D ¯ ( 1 − v ) ∂ 2 M ∂ x 1 2 = 0 ;
W = 0 or Q + D ¯ ( 1 − v ) ∂ 2 φ ∂ x 1 2 = 0 (15)
Now consider the infinite along the axis х1 band with an arbitrary thickness changes h = h ( x 2 ) . We seek a solution of problem (13)-(15) in the for
( Q , M , φ , W ) T = ( Q ¯ , M ¯ , φ ¯ , W ¯ ) T e i ( α x 1 − ω t ) (16)
Describing the harmonic plane waves propagating along the axis х1. Here ( Q ¯ , M ¯ , φ ¯ , W ¯ ) T -complex amplitude-function; k-wave number; С ( С = С R + i C i )- complex phase velocity; ω-complex frequency.
To clarify their physical meaning, consider two cases:
1) k = k R ; С = С R + i C i , ( ω R = ω I + i ω I ) then the solution of differential Equations (13) has the form of a sine wave at х1, whose amplitude decays over time;
2) k = k R + i k I ; С = С R , Then at each point х1 fluctuations established, but х1 attenuated.
In both cases, the imaginary part kI or CI characterized by the intensity of the dissipative processes. Substituting (16) in (17), we obtain a system of first order differential equations solved for the derivative
Q ¯ ′ − α 2 М ¯ − α 2 D ¯ ′ ( 1 − v ) φ ¯ − ρ h ω 2 W ¯ = 0 ; М ¯ ′ − Q ¯ + α 2 D ¯ ′ ( 1 − v ) W ¯ = 0 ; φ ¯ ′ − 1 D ¯ M ¯ − α 2 W ¯ = 0 ; W ¯ ′ − φ ¯ = 0 (17)
with boundary conditions at the ends of the band х2 = 0, l2, one of the four types
1) Swivel bearing: W ¯ = M ¯ = 0 (18)
2) Sliding clamp: Q ¯ = φ ¯ = 0 (19)
3) Anchorage: W ¯ = φ ¯ = 0 (20)
4) Free edge: { M ¯ + α 2 D ¯ ( 1 − ν ) W ¯ = 0 Q ¯ − α 2 ( 1 − ν ) D ¯ φ ¯ = 0 (21)
Thus, the spectral formulated task (17) and (21) the parameter α2, describes the propagation of flexural waves in planar waveguide made as a band with an arbitrary coordinate on the thickness change х2. It is shown that the spectral parameter α2 It takes complex values (in the case of R Е n ( t − τ ) ≠ 0 ) If R Е n ( t − τ ) = 0 , whereas the spectral parameter α2 It takes only real values. Transform this system (17). We have
Q ¯ ′ = M ¯ ″ + D ¯ ″ ( 1 − v ) α 2 W ¯ + D ¯ ′ ( 1 − v ) α 2 φ ¯
From whence
M ″ + D ¯ ″ ( 1 − v ) α 2 W ¯ − α 2 M ¯ − ρ h w 2 W ¯ = 0
Moreover
W ¯ − 1 D ¯ M ¯ − α 2 W ¯ = 0.
Thus, the conversion system is of the form
{ M ¯ ″ − α 2 M ¯ − ( ρ h ω 2 − D ¯ ″ ( 1 − v ) α 2 ) W ¯ = 0 W ″ − α 2 W ¯ − 1 D ¯ M ¯ = 0 (22)
The boundary conditions (18)-(21) in alternating W ¯ , M ¯ it has the form:
1) Swivel bearing: W ¯ = M ¯ = 0 ; (23)
2) Sliding clamp: W ¯ ′ = M ¯ ′ − α 2 D ¯ ′ ( 1 − ν ) W ¯ = 0 ; (24)
3) Anchorage: W ¯ = W ¯ ′ = 0 (25)
4) Free edge: M ¯ ′ + α 2 D ¯ ( 1 − ν ) W ¯ = 0 M ¯ ′ − α 2 ( 1 − ν ) ( D W ¯ ) ′ = 0 (26)
at х 2 = 0 or х 2 = + l 2 .
Let М ¯ and W ¯ some own functions of the system (22)-(26) may have a complex meaning. Multiply the equation system (22) to function M ^ ⌢ and W ^ ⌢ , complex conjugate to М ¯ and W ¯ . Identical converting the first equation, we integrate the resulting equality х2 and composed of the following linear combination
∫ 0 l 2 M ¯ ″ W ^ ⌢ d x 2 − α 2 ( 1 − ν ) ∫ 0 l 2 ( D ¯ W ¯ ) ′ ′ W ^ ⌢ d x 2 + α 2 ( 1 − ν ) ∫ 0 l 2 ( D ¯ W ¯ ) ′ ′ W ^ ⌢ d x 2 − α 2 ∫ 0 l 2 M ¯ W ^ ⌢ d x 2 − ω 2 ∫ 0 l 2 ρ h W ¯ W ^ ⌢ d x 2 − α 2 ( 1 − ν ) ∫ 0 l 2 D ¯ ″ W ¯ W ^ ⌢ d x 2 + ∫ 0 l 2 W ¯ ″ M ^ ⌢ d x 2 − α 2 ∫ 0 l 2 W ¯ M ^ ⌢ d x 2 − ∫ 0 l 2 M ¯ M ^ ⌢ D ¯ d x 2 = 0 (27)
Integrating (27) by parts,
[ M ¯ ′ − α 2 ( 1 − ν ) ( D W ¯ ′ ) ] W ^ ⌢ | 0 l 2 − ∫ 0 l 2 [ M ¯ ′ W ⌢ ′ + M ^ ⌢ ′ W ¯ ′ ] d x 2 + α 2 ( 1 − ν ) ∫ 0 l 2 D ¯ W ¯ ′ W ⌢ ′ d x 2 − α 2 ∫ 0 l 2 [ M ¯ W ⌢ ′ + M ^ ⌢ W ¯ ] d x 2 + 2 α 2 ( 1 − ν ) ∫ 0 l 2 D ¯ ″ W ¯ W ^ ⌢ d x 2 − ω 2 ∫ 0 l 2 ρ h W ¯ W ^ ⌢ d x 2 − ∫ 0 l 2 M ¯ M ^ ⌢ D ¯ d x 2 + W ¯ ′ M ^ ⌢ | 0 l 2 + 2 α 2 ( 1 − ν ) ∫ 0 l 2 D ¯ ′ W ¯ ′ W ^ ⌢ d x 2 + α 2 ( 1 − ν ) ∫ 0 l 2 D ¯ ′ W ¯ W ^ ⌢ ′ d x 2 + α 2 ( 1 − v ) ∫ 0 l 2 D W ¯ ″ W ^ ⌢ d x 2 = 0
or
[ M ¯ ′ − α 2 ( 1 − v ) ( D W ¯ ) ′ ] W ^ ⌢ | 0 l 2 + [ M ^ ⌢ + α 2 ( 1 − v ) D ¯ W ^ ⌢ ] W ¯ ′ | 0 l 2 − ∫ 0 l 2 ( M ¯ ′ W ^ ⌢ ′ + M ^ ⌢ ′ W ¯ ′ ) d x 2 − α 2 ∫ 0 l 2 ( W ¯ M ^ ⌢ + W ^ ⌢ M ¯ ) d x 2 − ∫ 0 l 2 M ¯ M ^ ⌢ D ¯ d x 2 − ω 2 ∫ 0 l 2 ρ h W ¯ W ^ ⌢ d x 2 − 2 α 2 ( 1 − v ) ∫ 0 e 2 D ¯ ″ W ^ ⌢ W ¯ d x 2 + α 2 ( 1 − v ) ∫ 0 e 2 D ¯ ′ ( W ^ ⌢ W ¯ ) ′ d x 2 = 0. (28)
It is easy to make sure that is the integral terms of (28) vanish at any combination of the boundary conditions (23)-(26). It should also be noted that all the functions under the integral valid at R Е n ( t − τ ) = 0 . The expressing α2 (28) We find that
α 2 = ∫ 0 l 2 ( M ′ ¯ W ⌢ ′ + M ⌢ ′ W ⌢ ′ ) d x 2 + ∫ 0 l 2 M ¯ M ^ ⌢ D ¯ d x 2 + ω 2 ∫ 0 l 2 ρ h W ¯ ⌢ W ^ ⌢ d x 2 ∫ 0 l 2 ( M ¯ W ^ ⌢ + M ^ ⌢ W ¯ ) d x 2 − 2 ( 1 − ν ) ∫ 0 l 2 D ¯ ″ W ¯ W ^ ⌢ d x 2 − ( 1 − ν ) ∫ 0 l 2 D ¯ ′ ( W ¯ W ^ ⌢ ) ′ d x 2 -real
number.
Thus (with R Е n ( t − τ ) = 0 ), It is shown that the square of the wave number for own endless strip of varying thickness is valid for any combination of boundary conditions. If R Е n ( t − τ ) ≠ 0 , then α 2 It is a complex value for any combination of boundary conditions.
The resulting spectral problem (17)-(21) is not self-adjoin. Built for her adjoin problem using this Lagrange formula [
∫ 0 l L ( U ) ⋅ V * d x = Z ( U , V * ) | 0 l − ∫ 0 l L * ( V * ) ⋅ U d x , (29)
where L and L*―direct and adjoin linear differential operators; U and V*―ar- bitrary decisions of relevant boundary value problems.
In our case
L = [ д д х 2 − α 2 − α 2 D ¯ ′ ( 1 − v ) − ρ h ω 2 − 1 д д х 2 0 − α 2 D ¯ ′ ( 1 − v ) 0 1 D ¯ д д х 2 − α 2 0 0 − 1 д д х 2 ] (30)
on the left-hand side of Equation (29) will be as follows
∫ 0 l 2 [ Q ¯ ′ Q ¯ • − α 2 M ¯ Q ¯ • − α 2 D ¯ ′ ( 1 − ν ) φ ¯ Q • − ρ h ω 2 W ¯ Q ¯ • + M ¯ ′ M ¯ • − Q ¯ M ¯ • + α 2 D ¯ ′ ( 1 − ν ) W ¯ M ¯ • + φ ¯ ′ φ ¯ • − 1 D ¯ M ¯ φ ¯ • − α 2 W ¯ φ ¯ • + W ¯ ′ W ¯ • − φ ¯ W ¯ • ] d x 2 = 0 (31)
or, integrating parts
[ Q ¯ Q ¯ • + М ¯ М ¯ • + φ ¯ φ ¯ • + W ¯ W ¯ • ] | 0 l 2 − ∫ 0 l 2 [ ( Q ¯ • ′ + M ¯ • ) Q ¯ + ( M ¯ • ′ + α 2 Q ¯ • + 1 D ¯ φ ¯ • ) M ¯ + ( φ ¯ • ′ + W ¯ • + α 2 D ¯ ′ ( 1 − ν ) Q ¯ • ) φ ¯ + ( W ¯ • ′ + α 2 φ ¯ • − α 2 D ¯ ′ ( 1 − ν ) M ¯ • + ρ h ω 2 Q ¯ • ) W ¯ ] d x 2 = 0 (32)
Thus the conjugate (30)-(32), the system has the form
{ Q ¯ • ′ + M ¯ • = 0 M ¯ • ′ + α 2 Q ¯ • + 1 D φ ¯ • = 0 ϕ ¯ • ′ + W ¯ • + α 2 D ¯ ′ ( 1 − ν ) Q ¯ • = 0 W ¯ • ′ − α 2 D ¯ ′ ( 1 − ν ) M ¯ • + α 2 φ ¯ • + ρ h ω 2 Q ¯ • = 0 (33)
Moreover, we get the conjugate boundary conditions of equality to zero is integral members Z ( U , V * ) | 0 l 2 expression in (32):
1) Swivel bearing: φ ¯ • = Q ¯ • = 0 , x 2 = 0 , l 2 (34)
2) Sliding clamp: W ¯ • = M ¯ • = 0 , x 2 = 0 , l 2 (35)
3) Anchorage: M ¯ • = Q ¯ • = 0 , x 2 = 0 , l 2 (36)
4) Free edge: { φ ¯ • + α 2 D ¯ ( 1 − ν ) Q ¯ • = 0 , W ¯ • − α 2 D ¯ ( 1 − ν ) M ¯ • = 0 , x 2 = 0 , l 2
For conditions biorthogonality solutions once again use the Lagrange formula (29) in the form
∫ 0 l [ L ( U ) V • + L • ( V • ) U ] d x = Z ( U , V • ) | 0 l 2 , (37)
that leads to the consideration of the following integral
∫ 0 l 2 [ Q ¯ ′ i Q ¯ j • − α i 2 M ¯ i Q ¯ j • − α i 2 D ¯ ′ ( 1 − ν ) φ ¯ i Q ¯ j • − ρ h ω 2 W ¯ i Q ¯ j • + M ¯ ′ i M ¯ j • − Q ¯ i M ¯ j • + α i 2 D ¯ ′ ( 1 − ν ) W ¯ i M ¯ j • + φ ¯ ′ i φ ¯ j • − 1 D ¯ M ¯ i φ ¯ j • − α i 2 W ¯ i φ ¯ j • + W ¯ ′ i W ¯ j • − φ ¯ i W ¯ j • + Q ¯ j • ′ Q ¯ i + M ¯ j • Q ¯ i + M ¯ j • ′ M ¯ i + α j 2 M ¯ i Q ¯ j • + 1 D ¯ M ¯ i φ ¯ j • + φ ¯ i φ ¯ j • ′ + W ¯ j • φ ¯ i + α j 2 D ′ ( 1 − ν ) Q j • φ ¯ i + W ¯ i W ¯ j • ′ + α j 2 W ¯ i φ ¯ j • − α j 2 D ¯ ′ ( 1 − ν ) W ¯ i M ¯ j • + ρ h ω 2 Q ¯ j • W ¯ i ] d x 2 = 0 , (38)
where ( Q ¯ i , M ¯ i , φ ¯ i , W ¯ i ) T -own form, corresponding to the Eigen value αi original spectral problem; ( Q ¯ j • , M ¯ j • , φ ¯ j • , W ¯ j • ) T -own form, corresponding to the Eigen value αj adjoin.
Integrating (38) by parts
( α i 2 − α j 2 ) [ ∫ 0 l 2 [ − M ¯ i Q ¯ j • − D ¯ ′ ( 1 − ν ) Q ¯ j • φ ¯ i + D ¯ ′ ( 1 − ν ) W ¯ i M ¯ j • − W ¯ i φ ¯ j • ] d x 2 + [ D ¯ ( 1 − ν ) Q ¯ j • φ ¯ i − D ¯ ( 1 − ν ) W ¯ i M ¯ j • ] | 0 l 2 ] = 0 , (39)
where to i ≠ j we have the condition biorthogonality forms:
∫ 0 l 2 [ ( M ¯ i + D ¯ ′ ( 1 − ν ) φ ¯ i ) Q ¯ j • + W ¯ i ( φ ¯ j • − D ¯ ′ ( 1 − ν ) M ¯ j • ) ] d x 2 + D ¯ ( 1 − ν ) [ W ¯ i M ¯ j • − Q ¯ j • φ ¯ i ] | 0 l 2 = δ i j (40)
The expression W ¯ i M ¯ j • − Q ¯ j • φ ¯ i zero, if the border is set to any of the conditions (18)-(21) in addition to the conditions of the free edge.
Consider a semi-infinite axial x1 lane variable section, wherein at the end (x1 = 0) harmonic set time exposure of one of two types of:
W = f W ( x 2 ) e i ω t , M 11 = f W ( x 2 ) e i ω t , x l = 0 (41)
or
φ 1 = f φ ( x 2 ) e i ω t , Q 1 = f Q ( x 2 ) e i ω t , x 1 = 0 (42)
where
φ 1 = ∂ W ∂ x 1 , Q 1 = D ¯ [ ∂ 3 W ∂ x 1 3 + 2 ( 1 − ν ) ∂ 3 W ∂ x 1 ∂ x 2 2 ] (43)
Transform the boundary conditions (41) so that they contain only selected our variables W, φ, M and Q
W = f w ( x 2 ) e i ω t , D ¯ ( ∂ 2 W ∂ x 1 2 + ν ∂ 2 W ∂ x 2 2 ) = f M ( x 2 ) e i ω t , x 1 = 0 ,
∂ W ∂ x 1 = f φ ( x 2 ) e i ω t , D ¯ ( ∂ 3 W ∂ x 1 3 + 2 ( 1 − ν ) ∂ 3 W ∂ x 1 ∂ x 2 2 ) = f Q ( x 2 ) e i ω t , x 1 = 0 ,
or
W = f w ( x 2 ) e i ω t , D ¯ ( ∂ 2 W ∂ x 1 2 + ν ∂ 2 W ∂ x 2 2 ) − D ¯ ( 1 − ν ) ∂ 2 W ∂ x 2 2 = f M ( x 2 ) e i ω t , x 1 = 0 ,
∂ W ∂ x 1 = f φ ( x 2 ) e i ω t , ∂ ∂ x 1 [ D ¯ ( ∂ 2 W ∂ x 1 2 + ∂ 2 W ∂ x 2 2 ) ] + D ¯ ( 1 − ν ) ∂ 2 ∂ x 2 2 ( ∂ W ∂ x 1 ) = f Q ( x 2 ) e i ω t , x 1 = 0 ,
Of finally
W = f w ( x 2 ) e i ω t , M = [ f M ( x 2 ) + D ¯ ( 1 − ν ) f ″ w ( x 2 ) ] e i ω t , x 1 = 0 (44)
∂ W ∂ x 1 = f φ ( x 2 ) e i ω t , ∂ M ∂ x 1 = [ f Q ( x 2 ) − D ¯ ( 1 − ν ) f ″ φ ( x 2 ) ] e i ω t , x 1 = 0. (45)
Assume that the desired solution of the no stationary problem can be expanded in a series in Eigen functions of the solution of the spectral problem. In the case of constant thickness it is evident, and in general, the question remains open.
The solution of the stationary problem (17)-(21) (41)-(42) will seek a
( W φ M Q ) = ∑ k = 1 N a k ( W ¯ k ( x 2 ) φ ¯ k ( x 2 ) M ¯ k ( x 2 ) Q ¯ k ( x 2 ) ) e − i ( α k x 1 − ω t ) . (46)
where W ¯ k , φ ¯ k , θ ¯ k , M ¯ k -biorthonormal own forms of the spectral problem (17) - (21).
The representation (46) gives us the solution to the problem of non-stationary wave in the far field, i.e., where it has faded not propagating modes. The number of propagating modes used N course for each specific frequency ω, since the cutoff frequency is greater than the other ω.
Consider two cases of excitation of stationary waves in the band:
1) f w = 0 -antisymmetric relative х1;
2) f φ = 0 -symmetric.
In the case of antisymmetric excitation, substituting (46) into (44) and expressing fM(x2), obtain
f M ( x 2 ) = ∑ k = 1 N α k M ¯ k ( x 2 ) . (47)
Value biorthogonality (40) gives expression to determine the unknown coeffi-
cients a k = ∫ 0 e 2 f M ( x 2 ) Q ¯ k • ( x 2 ) d x 2 .
In the case of a symmetrical excitation f Q ( x 2 ) We obtain rearranging (46) to (45) in the following form
f Q ( x 2 ) = ∑ k = 1 N ( − i α k a k M ¯ k ( x 2 ) ) (48)
Biorthogonality ratio (30) gives
a k = i α k ∫ 0 l 2 f Q ( x 2 ) Q ¯ k • d x 2 (49)
Testing Software System and Study the Properties of Propagation of Flexural Waves in a Band of Variable ThicknessTesting program was carried out on the task of distributing the flexural waves in a plate of constant thickness. Consider the floor plate of constant thickness infinitely satisfying Kirchhoff-Love hypotheses, with supported long edges (
At end face х 1 = 0 specified:
w = f 1 ( x 2 ) e i w t , M 11 = f 2 ( x 2 ) e i w t (50)
Spread along the axis х1 flexural wave is described by the differential control system (13)
{ Q ′ + ∂ 2 M ∂ x 1 2 + ρ h w ″ = 0 ( w ″ = ∂ 2 w / ∂ t 2 ) , M ′ − θ = 0 , φ ′ − 1 D ¯ M + ∂ 2 w ∂ x 1 2 = 0 w ′ − φ = 0 , h = h 0 (51)
with boundary conditions of the form (15)
w = 0 , M − D ¯ ( 1 − ν ) ∂ 2 w ∂ x 1 2 = 0 , x 2 = 0 , π (52)
Introducing the desired motion vector in the form of
( Q M φ w ) = ( Q ¯ M ¯ φ ¯ W ¯ ) e − i ( a k x 1 − ω t ) (53)
Go to the spectral problem
{ Q ¯ ′ − α 2 M ¯ − ω 2 ρ h W ¯ = 0 , M ¯ ′ − Q ¯ = 0 , φ ¯ ′ − 1 D ¯ M ¯ − α 2 W ¯ = 0 , W ¯ ′ − φ ¯ = 0 , (54)
with the boundary conditions
W = 0 , M ¯ + D ¯ ( 1 − ν ) α 2 W ¯ = 0 , x 2 = 0 , π
or
W ¯ = 0 , M ¯ = 0 , x 2 = 0 , π . (55)
Rewrite the system (54) as follows
{ W ¯ ″ − 1 D ¯ M ¯ − α 2 W ¯ = 0 , M ¯ ″ − α 2 M ¯ − ω 2 ρ h W ¯ = 0 , (56)
and W ¯ = 0 , M ¯ = 0 , x 2 = 0 , π .
We seek the solution of (56) in the form
W ¯ = a w sin n x 2 , M = a M sin n x 2 , ( n = 1 , 2 , ⋯ ) (57)
satisfying the boundary conditions (55).
We obtain an algebraic homogeneous system
− n 2 a W − α 2 a W − 1 D ¯ a M = 0 ; − n 2 a M − α 2 a M − ω 2 ρ h a w = 0. (58)
For the existence of a nontrivial solution, which is necessary to require the vanishing of its determinant
det | n 2 + α 2 1 D ¯ ω 2 ρ h n 2 + α 2 | = 0 ,
or
α 1 , 2 2 + n 2 = ± ω ρ h D ¯ k , (59а)
where, when R Е n ( t − τ ) = 0
α 1 , 2 2 = − n 2 ± ω ρ h D . (59b)
Ownership of constant thickness strip bending vibrations are of the form
W ¯ n 1 , 2 = sin n x 2 ; M n 1 , 2 = ± ω ρ h D ¯ sin n x 2 ; φ n 1 , 2 = n cos n x 2 ; Q n 1 , 2 = ∓ ω ρ h D ¯ cos n x 2 . (60)
We construct the solution of the problem adjoin to (54)-(55)
{ W ¯ • ′ + α 2 φ ¯ • + ρ h ω 2 Q ¯ * = 0 , φ ¯ • ′ + W • = 0 M ¯ * ′ + 1 D ¯ φ ¯ • + α 2 Q ¯ • = 0 , Q ¯ • ′ + M ¯ • = 0 (61)
and
φ ¯ * = 0 , Q ¯ * = 0 , x 2 = 0 , π . (62)
Transforming (61)-(62) we obtain the following system of first order differential equations
{ φ ¯ • ′ ′ − α 2 φ ¯ • − ρ h ω 2 Q ¯ • = 0 Q ¯ • ′ ′ − α 2 Q ¯ • − 1 D ¯ φ ¯ • = 0 ,
x 2 = 0 , π ; φ ¯ • = 0 , Q ¯ • = 0. (63)
The solution of (63) in the form
φ ¯ • = a φ • sin n x 2 , Q ¯ • = a Q • sin n x 2 (64)
From whence α 1 , 2 2 It has the same form (59a), own forms of vibrations are of the form:
φ ¯ n • 1 , 2 = ± ω p h D ¯ sin n x 2 , Q ¯ n • 1 , 2 = sin n x 2 , W ¯ n • 1 , 2 = ± n ω p h D ¯ cos n x 2 M ¯ n • 1 , 2 = n cos n x 2 . (65)
For biorthogonality conditions direct solutions and the adjoin problem is necessary to consider the following equation
∫ 0 π [ Q ¯ ′ i Q ¯ j • − α i 2 M ¯ i Q ¯ j • − ω 2 ρ h W ¯ i Q ¯ j • + Q ¯ j • ′ Q ¯ i + M ¯ j • Q ¯ i + M ¯ ′ i M ¯ j • − Q ¯ i M ¯ j • + M ¯ j • ′ M ¯ i + 1 D ¯ φ ¯ j • M ¯ i + α j 2 Q ¯ j • M ¯ i + φ ¯ ′ i φ ¯ j • − 1 D ¯ M ¯ i φ ¯ j • − α i 2 W ¯ i φ ¯ j • + φ ¯ j • ′ φ ¯ i + W ¯ j • φ ¯ i + W ¯ ′ i W ¯ j • − φ ¯ i W ¯ j • + W ¯ j • ′ W ¯ i + α 2 φ ¯ j • W ¯ i + ρ h ω 2 Q ¯ j • W ¯ i ] d x 2 = δ i j (66)
where Q ¯ i , M ¯ i , φ ¯ i , W ¯ i -own form for the direct problem, the corresponding Eigen values α i , and Q j • , M ¯ j • , φ ¯ j • , W ¯ j • -own form of the dual problem, the corresponding Eigen value αj. Integrating by parts in (66), using the boundary conditions (55) and (62) we obtain the desired condition:
∫ 0 π [ M ¯ i Q ¯ j • + W ¯ i φ ¯ j • ] d x 2 = δ i j . (67)
We now verify biorthogonality received their own forms (60) and (65) using the condition biorthogonality (67)
∫ 0 π [ ρ h D ¯ sin ( i x 2 ) ⋅ sin ( j x 2 ) + ρ h D ¯ sin ( i x 2 ) sin ( j x 2 ) ] d x 2 = 2 ρ h D ¯ ∫ 0 π sin ( i x 2 ) sin ( j x 2 ) d x 2 = π ρ h D ¯ δ i j
The normalized adjoin eigenvector on π ρ h D ¯ , we have a system of eigenvectors satisfying the condition (67).
We now obtain the solution of the problem of the distribution of the stationary wave in the semi-infinite strip of constant thickness. Suppose that at the border х 1 = 0 set the following stationary disturbance:
w = W ¯ e i ω t = b W sin ( n x 2 ) e i ω t , M = M ¯ e i ω t = b M sin ( n x 2 ) e i ω t , x 1 = 0 (68)
We seek a solution of a problem
w ( x 1 , x 2 , t ) = ∑ k = 1 ∞ a k W k , M ( x 1 , x 2 , t ) = ∑ k = 1 ∞ a k M k (69)
where
W k = W ¯ ( x 21 ) e − i ( a k x l − ω t ) , M k = M ¯ ( x 2 ) e − i ( a k x l − ω t ) ,
а W ¯ k и M ¯ k -own form (60), corresponding to αk
It is evident from the band at the end face at x 1 = 0 decision (69) must satisfy the boundary conditions (68)
b W sin ( n x 2 ) e i ω t = ∑ k = 1 ∞ a k W ¯ k ( x 2 ) e i ω t ,
b M sin ( n x 2 ) e i ω t = ∑ k = 1 ∞ a k M ¯ k ( x 2 ) e i ω t ,
or go to the amplitude values
b w sin ( n x 2 ) e i ω t = ∑ k = 1 ∞ a k W ¯ k ,
b M sin ( n x 2 ) е i ω t = ∑ k = 1 ∞ a k M ¯ k , (70)
Consider the following integral
∫ 0 π [ M ¯ Q ¯ j • + W ¯ φ ¯ j • ] d x 2 = ∫ 0 π [ ∑ k = 1 ∞ a k M ¯ k Q ¯ j • + ∑ k = 1 ∞ a k W ¯ k φ ¯ j • ] d x 2 = ∑ k = 1 ∞ a k ∫ 0 π [ M ¯ k Q ¯ j • + W ¯ k φ ¯ j • ] d x 2 = a j . (71)
On the other hand on the edge х 1 = 0 the same integral as follows
∫ 0 π [ b M sin ( n x 2 ) Q ¯ j • + b W sin ( n x 2 ) φ ¯ j • ] d x 2 (72)
Substituting in (72) from the normalized own form (65) we obtain
∫ 0 π [ b M sin ( n x 2 ) 1 π ρ h D ¯ sin ( j x 2 ) ± b w sin ( n x 2 ) ω π sin ( j x 2 ) ] d x 2 = [ b M π ρ h D ¯ ± b w ω π ] ⋅ ∫ 0 π sin ( n x 2 ) ⋅ sin ( j x 2 ) d x 2 (73)
From a comparison of the formulas (71) and (73) it is clear that under such boundary conditions is excited only “n”-Single private form:
a j ± = δ n j [ b M 2 ρ h D ¯ ± b w ω 2 ] (74)
Thus, the solution of the no stationary problem for a half-strip of constant thickness has the form
W ¯ = ( a n + W ¯ n + + a n − W ¯ n − ) e − i ( α x l − ω t ) M ¯ = ( a n − M ¯ n + + a n − M ¯ n − ) e − i ( α x l − ω t ) (75)
where
W ¯ n ± = ± sin n x 2 , M ¯ n ± = ± ω ρ h D ¯ sin n x 2 а a n ± -determined from the ratio (74).
Now suppose that the steady influence on the border of semi-infinite strip х 1 = 0 it has the form
w = f w ( x 2 ) e i ω t , M = f M ( x 2 ) e i ω t (76)
Let us expand the function f w and f M Fourier series of sinus in the interval [ 0 , π ]
f w ( x 2 ) = ∑ k = 1 ∞ B w k sin ( k x 2 ) , f M ( x 2 ) = ∑ k = 1 ∞ b M k sin ( k x 2 ) (77)
Using the results of the previous problem, we find that the solution can be represented as a Fourier series:
W = ∑ k = 1 ∞ ( a k + W k + + a k − W k − ) e − i ( α x l − ω t ) , M = ∑ k = 1 ∞ ( a k + M k + + a k − M k − ) e − i ( α x l − ω t ) (78)
where a k ± = b M k 2 ρ h D ¯ ± b w k ω 2 a W ¯ k ± , M ¯ k ± determined from the ratio (60).
The numerical solution of spectral problems carried out by computer software system based on the method of orthogonal shooting S. K. Godunov [
The calculation results are obtained when A = 0.
At high frequencies, where the wavelength is comparable or less than the fashion of strip thickness, there is, as is well known, localized in the faces of the Rayleigh wave band at a speed slower speed Сs, however, as is obvious, this formulation of the problem, in principle, does not allow to obtain this result. However, it should be noted that in the application of the theory of Kirchhoff-Love platinum constant thickness is obtained the correct conclusion about the growth
of the number of propagating modes with increasing frequency that is well seen from the spectral curves of
We proceed to the propagation of flexural waves in a symmetric band Kirchhoff-Love of variable thickness. Let us first consider a waveguide with a linear thickness change, presented in
lim ω → ∞ C ˜ f = 2 C s tg φ 2
where Сs-The speed of shear waves, which coincides with the results of other studies [
Kirchhoff theory-Lava applicability for studying wave propagation in waveguides is tapered, as the frequency increases with decreasing length of one side of the wave modes, with different wave localizes with the sharp edge of the wedge so that the ratio of the wavelength and the effective thickness of the material is in the field of applicability of the theory [
It should also be noted that the numerical analysis of the dispersion Equation (33) does not allow to show the presence of strictly limit the speed of wave propagation modes, since the computer cannot handle infinitely large quantities. We can only speak about the numerical stability result in a large frequency range, which is confirmed by research. For example, when tg φ / 2 = 0.2 value of the phase velocity of a measured without shear wave velocity at ω = 3 and ω = 40 It differs fifth sign that corresponds to the accuracy of calculations, resulting in test problem.
In the example h0 = 0.0001, it certainly gives an increase of the phase velocity when the frequency increases further, since such a strong localization of the wave to the thin edge of the wedge, starts to affect the characteristic dimension-the thickness of the truncated wedge, and Kirchhoff hypothesis-Lava stops working. To solve the problem of acute wedge numerically is not possible, since the dispersion equation contains a term D−1, and the thickness tends to zero flexural rigidity D behaves as a cube and the thickness goes to zero. This significantly increases the “rigidity” (i.e. the ratio between the small and large coefficient) system, increases dramatically the computing time and decreases the accuracy of the results. However, it is clear that you can trust the results obtained where the agreed parameters h0 and α. We note also that the numerical experiment showed no significant dependence of the phase velocity of the first mode of the Poisson’s ratio ν , and the fact that a family of dispersion curves with different apex angles of the wedge have a similarity property: the ratio of the phase velocity to the limit does not depend on the angle of the wedge φ. On the modes, starting from the second, the speed limit dependence on Poisson’s ratio becomes noticeable about 8.5% for the second mode when changing 0 ≤ ν ≤ 0.5 . Generally, the limit speed increases with the stronger and the more the mode number.
Figures 17-19 show the spectral curves of the first three events in the case of the nonlinear dependence of the thickness of the strip from the coordinates х2.
h ( x 2 ) = h 0 + h x 2 p , 0 < x 2 ≤ 1 ,
where the parameter ρ It was assumed to be 1.5; 2; 2.5; 3 (curves 1, 2, 3, 4, respectively, curve “0” corresponds to p = 1-linear relationship).
From the equation of “0” with the remaining curve shows that they are located on the horizontal high-frequency asymptote, monotonically to zero. The midrange is observed a characteristic peak which is shifted to lower frequencies with an increase in “p”. In accordance with the charts of waveforms at Figures 20-22 quicker and localization of motion near the edge of the waveguide.
Thus, it can be concluded that the phase velocity of the wave in the localized waveguide edge is defined as the frequency increases the rate of change of thickness in the vicinity of the sharp edge.
Figures 23-28 illustrate the solution of the stationary problem for a wedge-shaped waveguide with a linear change in the thickness of the coordinates х2 depending on the location of the excitation zone, from which it is clear that
the main contribution to the resulting solution brings a sharp edge excited waveguides. Analysis of Figures 23-25 shows that, if aroused sharp edge of the wedge is raised mostly first oscillation mode, and ratio α1 increases with increasing frequency.
The amplitude of the remaining modes is not more than 5% from the first (ω = 10). Upon excitation of the central waveguide portion (
conclusion that in this case the entire frequency range can be divided into zones, in which one of the modes propagates mainly. For example, in the case of
0 ≤ ω ≤ 2 I fashion; 2 ≤ ω ≤ 5 II fashion; 5 ≤ ω ≤ 10 III fashion, t. i.
On the basis of these results, the followings may be concluded:
- On the basis of the variation equations of the theory of elasticity, the mathematical formulation of the problem of the propagation of longitudinal waves in plates of variable thickness is reduced to a system of differential equations with the corresponding boundary conditions.
- Showing that the square of the wave number for own endless bands of variable thickness in any combination of the action of the boundary conditions.
- The obtained spectral problem is not self-adjoint, so the associated problem is constructed for it. Coupling system consists of ordinary differential equations with the appropriate boundary conditions. With the help of the Lagrange formula obtained conditions biorthogonality forms. The problem is solved numerically by the method of orthogonal shooting S. K. Godunov in conjunction with the method of Muller.
- Analysis of the data shows that the region with the imaginary theory of Kirchhoff-Love to the plate of constant thickness is limited by the low frequency range. At high frequencies, when wavelength comparable to fashion or less than the thickness of the plate, theory Kirchhoff-Love does not yield reliable results.
- For the phase velocity of propagation modes in the band of variable thickness, there is final repartition unlike the constant cross-section strip.
Safarov, I.I. and Boltaev, Z.I. (2018) Propagation of Natural Waves on Plates of a Variable Cross Section. Open Access Library Journal, 5: e4262. https://doi.org/10.4236/oalib.1104262