_{1}

An implementation of the International Freight Simultaneous Transportation Equilibrium Model (IFSTEM) that developed in United Nations Economic and Social Commission for Western Asia (ESCWA), to the goods trade through the ports and lands of Sultanate of Oman is presented. Although some socio-economic variables, which are not available, were required for IFSTEM model calibration, some reasonable assumptions were made and it was good enough to draw the following main findings: the proposed alternative enhancement scenarios were 4 nested scenarios, i.e., each scenario included the previous one plus an additional enhancement. Scenario 1 involved reducing the number of documents from 8 to 4, and scenario 2 involved scenarios 1 plus reducing the time for port and terminal handling to 1 day (instead of 2 days for imports and 3 days for exports as estimated for 2012 by the World Bank trading across borders report 2013). Scenario 3 involved scenarios 1 and 2 plus reducing the international maritime transport times and costs by 20% (i.e., to become equal to that of the United Arab Emirate (UAE) according to the application assumptions), and scenario 4 involved scenarios 1 and 2 plus reducing the international maritime transport times and costs by 40% (i.e., to become 20% less than that of UAE according to the application assumptions). These 4 enhancement scenarios were analyzed against and compared with scenario (0), i.e., the reference “Do nothing” scenario.The prediction results revealed that the estimated international trade flows (imports, exports and re-exports) for Oman for scenarios 4 would increase by more than 504% by 2040 ( i.e., around 187 million tons) compared to the present situation of the base year 2012 (i.e., around 37 million tons). This increase would represent around 70% compared to the “do nothing” reference scenario by the year 2040 (i.e., around 110 million tons) assuming that the average increase of international trade flows in the “do nothing” case would be around 4% annually during the analysis period from 2012 to 2040. The predictions of average total trip time and total cost per ton revealed an estimated decrease for scenario 4 compared to the reference scenario by around 25% and 20% respectively. These results are internally consistent and represented reasonably significant improvements compared to the “Do nothing” reference scenario.

The prediction of multicommodity freight flows over a multimodal network has attracted much interest in the recent years. In contrast to urban transportation, where the prediction of passenger flows over multimodal networks has been studied extensively and many of the research results have been transferred to practice (Safwat and Walton [

The first class of models that was well studied in the past for prediction of interregional freight flows is the spatial price equilibrium model and its variants. The model, stated initially by Samuelson [

The second class of models which we consider are freight network equilibrium models which enable the prediction of multicommodity flows over a multimodal network, where the physical network is modeled at a level of detail appropriate for a nation or a large region, and represents the physical facilities with relatively little abstraction. The demand for the transportation services is exogenous and may originate from an input-output model, if one is available, or from other sources, such as observed demand or scaling of observed past demand (in our proposed model endogenous transportation demand will be considered). The choice of mode or subsets of modes used is exogenous and intermodal shipments are permitted. In this sense, these models may be integrated with econometric demand models as well. The emphasis is on network representation and the proper representation of congestion effects in a static model aimed to serve comparative studies or discrete time multiperiod analyses.

The first significant multimodal predictive freight network model was by Roberts [

Later, the Multi-State Transportation Corridor Model (McGinnis et al. [

Guelat, et al. [

Safwat [

Safwat and Hasan [

Hasan [

More recently, Mathisena and Hanssena [

Duan et al. [

The IFSTEM-Oman adapted in this paper is essentially based on the above mentioned developments, adaptations and implementations. That is, the IFSTEM-Oman is a simultaneous trip generation, trip distribution, modal split and traffic assignment model that most appropriately illustrates the behavior of exporters and importers of different commodities over the international multimodal network for Oman.

The remainder of this article is structured as follows: In Section 2, we describe the international trade flows prediction model for Oman (IFSTEM-Oman Model); Then, in Section 3, IFSTEM-Oman model application assumptions are presented before predicted international trade flows, times and costs: application results and analysis are presented in Section 4; Finally, conclusions are presented in Section 5.

Hasan [

The IFSTEM Model may be briefly described as follows:

S i r = max { 0 , ln ∑ j ∈ D i r exp ( − θ i r u i j r + A j r ) } , ∀ i ∈ I r

G i r = α r S i r + E i r , ∀ i ∈ I r

T i j r = { G i r exp ( − θ i r u i j r + A j r ) ∑ k ∈ D i r exp ( − θ i r u i k r + A k r ) if i m c ≥ 0 0 otherwise , ∀ i j ∈ R r

C p r { = u i j r if H p r > 0 ≥ u i j r if H p r = 0 , ∀ p ∈ P i j r , i j ∈ R r

C p r = ∑ a ∈ A r δ a p r C a r ( F a r ) , ∀ p ∈ P i j r , i j ∈ R

δ a p r = { 1 iflinkabelongstopath p 0 otherwise , ∀ p ∈ P i j r , i j ∈ R r

where

C = Set of all commodity types;

M = Set of all mode types;

O = Set of all ALO (Administrative and Logistics Opeerations) types;

( N , A ) = A multimodal multi-commodity network consisting of a set of N nodes and a set of A links where: N = ∪ r ∈ C r ∈ C and A = ∪ r ∈ C A r ;

I = Set of origin (export) nodes I = ∪ r I r and N r ⊇ I r ;

i = An origin (export) node in the set I ;

r = The commodity type;

D i r = Set of destination (import) nodes that are feasible for importing commodity r from origin i ;

j = A destination (import) node in the set D i r ;

p = A simple (i.e., no node repeated) multimodal path (i.e., it may include a combination of links with different modes);

R r = Set of origin-destination pairs ( i j ) for commodity r ;

R = Set of all origin-destination pairs ( i j ) in the system, where R = ∪ r R r ;

P i j m ( r ) = Set of simple paths that can be used to transport commodity r from origin i to destination j using only m ( r ) modes of transport;

P r = Set of simple paths in the network ( N r , A r ) , i.e., ( P r = ∪ i j ∈ R r P i j m ( r ) ) ;

a = A link in the set A . Each link is identified by ( k , l , q ) , i.e., the link connects node k to node l by mode/operation q ;

A j r = a composite measure of the effect that the socioeconomic variables, which are exogenous to transport system, have on the number of tons of commodity r imported at destination j ;

S i r = accessibility of exporter of commodity r at origin i ;

G i r = the total number of tons of commodity r exported from origin i ;

E i r = a composite measure of the effect that the socioeconomic variables, which are exogenous to the transport system, have on the number of tons of commodity r exported from origin i ;

T i j r = the number of tons of commodity r exported from origin i to a destination j ;

u i j r = the “perceived” delivery cost (price) of the commodity r exported from origin i and imported to destination j ;

i m c = S P j r − u i j r − M P j r ≥ 0 = the import criteria;

S P j r = the average selling price of commodity r that an importer at destination j knew it;

M P j r = a margin profit of commodity r that an importer specified it;

H p r = the flow of commodity r on multimodal path p and the link-path

incidence relationships are given by F a r = ∑ p ∈ P r δ a p r H p r , ∀ a ∈ A r ;

C p r = the total perceived delivery cost for commodity r from export origin node i to import destination node j on any multimodal path p , which is the sum of the perceived costs on the links, C a r ( F a r ) , that comprise that multimodal path.

The IFSTEM model can be formulated as the following EOP for each commodity r ∈ C :

Minimize Z ( S , T , H ) = ∑ i ∈ I r 1 θ i r [ α r 2 ( S i r ) 2 + α r S i r − ( α r S i r + E i r ) ln ( α r S i r + E i r ) ] + ∑ i ∈ I r 1 θ i r [ ∑ j ∈ D r [ T i j r ln T i j r − A j r T i j r − T i j r ] ] + ∑ a ∈ A r ∫ 0 F a r C a r ( w ) d w

Subject to:

∑ j ∈ D i r T i j r = α t S i r + S i r , ∀ i ∈ I r

∑ p ∈ P i j r H p r = T i j r , ∀ i j ∈ R

S i r ≥ 0 , ∀ i ∈ I r

T i j r ≥ 0 , ∀ i j ∈ R r

H p r ≥ 0 , ∀ p ∈ p r

where

F a r = ∑ p δ a p r H P R , ∀ p ∈ p r .

We need an efficient solution procedure for the EOP that is guaranteed to converge to an existing and unique equilibrium. Safwat and Brademeyer [

1) determines a direction for improvement, d k ;

2) Determines an optimum step size, λ k , along that direction;

3) Updates the current solution, X k , X k + 1 = X k + λ k d k where the vector X k is defined by X k = ( S k , T k , F k ) .

As mentioned in the network representation of Safwat and Hasan (2004) and Hasan (2009), each O-D pair for a given commodity will have its own network, therefore the algorithm will deal with each O-D pair network separately and then updates its flows to the commodity network level. The algorithm can be summarized as follows:

Solution Algorithm:

Step 0: Initialization.

Perform all-or-nothing assignment based on C a = C a ( 0 ) , ∈ a ∈ A (i.e., free flow cost). This yield X 1 = ( S 1 , T 1 , F 1 ) . Set. k = 1 .

Step 1: Cost update.

Set C a k = C a ( F a k ) , ∀ a ∈ A .

Step 2: Direction finding.

Compute the costs on the shortest paths u i j k , ∀ i j ∈ R based on C a k . Find d k = Y k − X k where the vector Y k = ( L k , Q k , V k ) is given by

L i k = max { 0 , ln ∑ j ∈ D i exp ( − θ i u i j k + A j ) } , ∀ i ∈ I

Q i j k = { ( α L i k + E i ) exp ( − θ i u i j k + A j ) ∑ l ∈ D i exp ( − θ i u i l k + A l k ) if i m c = S P j − u i j k − M P j ≥ 0 0 otherwise , ∀ i j ∈ R

V a k = ∑ i j ∈ R ∑ p ∈ P i j δ p B p k , ∀ a ∈ A

where

B p k = { Q i j k if p = p ∗ ∈ P i j 0 otherwise , ∀ p ∈ P i j , ∀ i j ∈ R and p ∗ is the shortest path

between the given O-D pair. Then the feasible direction at iteration k is the vector d k with the following components:

d i k = L i k − S i k , ∀ i ∈ I

d i j k = Q i j k − T i j k , ∀ i j ∈ R

d a k = V a k − F a k , ∀ a ∈ A

Step 3: Line search.

Find λ k that solve

∑ i ∈ I α θ i [ ( S i k + λ d i k ) − ln ( ( S i k + λ d i k ) + E i ) ] d i k + ∑ i j ∈ R 1 θ i [ ln ( T i j k + λ d i j k ) − A j ] d i j k + ∑ a ∈ A C a ( F a k + λ d a k ) d a k = 0

Step 4: Move.

Set.

S i k + 1 = S i k + λ k d i k , ∀ i ∈ I

T i j k + 1 = T i j k + λ k d i j k , ∀ i j ∈ R

F a k + 1 = F a k + λ k d a k , ∀ a ∈ A

Step 5: Convergence test.

If a convergence criterion is met, stop (the current solution { S i k + 1 , T i j k + 1 , F a k + 1 } is the set of equilibrium flow patterns); otherwise, set k = k + 1 and go to Step 1.

A computer code in C++ was developed to create the multimodal network representation requirements and solve the above Algorithm.

As can be seen from the description of the IFSTEM Model, it involves two demand models. These are trip generation and trip distribution models. In a typical application of the IFSTEM Model, these demand models would have been calibrated using available socio-economic and transport and logistics cost data. However, because of data limitation on the availability of socio-economic and transport and logistics cost variables, in this application of the IFSTEM-Oman Model, we could not perform typical calibration of these demand models.

Instead, however, we assumed the following assumptions to “calibrate” the trip generation and trip distribution models within the IFSTEM-Oman Model. First, we invoked the following assumptions to estimate the exogenous variables E i for each origin i from the equation

E i = ∑ l = 1 L α l q l ( E l i )

1) l = 1 ;

2) q l ( E l i ) = E 1 i = G i o (Observed trip generation at origin i );

3) α 1 = 0.40 for all origins.

Hence

E i o = 0.40 G i o , ∀ i ∈ I

That is, the socio-economic variables, which are exogenous to the transport and logistics system, are assumed to account for 40% of the international trade flows that are exported from that origin.

For the attractiveness measure in the trip distribution model,

A j = ∑ w = 1 W θ i w g w ( A w j )

We assumed that

A i j = ln T i j o , ∀ i j ∈ R

By this assumption each destination has different attractiveness for different origins. We then assumed that this attractiveness composite measure is the exogenous variable in the exporter observed utility function. That is,

V i j = − θ i u i j + A i j

We further assumed that the exporter at origin i is influenced only by this attractiveness measure and that he would not consider the delivery cost u i j to be a major factor in his choice of the destination.

Hence, the accessibility measure for this behavior will be

S i o = ln ∑ j ∈ D i exp ( − θ i u i j + A i j ) , ∀ i ∈ I

S i o = ln ∑ j ∈ D i exp ( ln ( T i j o ) ) , ∀ i ∈ I

S i o = ln G i o , ∀ i ∈ I

And the trip generation model will be specified as follows:

G i o = α i S i o + E i 0 , ∀ i ∈ I

G i o = α i ln ( G i o ) + 0.40 G i 0 , ∀ i ∈ I

Now we can estimate α i , ∀ i ∈ I from the observed trip generation as follows:

α i = 0.6 G i o ln ( G i o ) , ∀ i ∈ I

We then estimated the parameters θ i r = θ r for all origins of commodity r by solving the IFSTEM-Oman Model for different values for θ r until we obtain the values θ r that satisfy the following condition:

∑ i ∈ I G i o ∑ i ∈ I G i p ≈ 1.60 for each commodity

where G i p is the predicted trip generation for origin i for year 2012. This value of θ r will keep the effect of transport and logistics system (supply), as measured by the delivery cost u i j , on the predicted trip generated from origin i to be 60% on average less than the observed trip generation.

This is consistent with the earlier assumption that 40% of trip generation is influenced by socioeconomic factors, which implies that 60% is influenced by transport and logistics cost factors.

The supply side of IFSTEM-Oman Model is represented by a set of link cost functions for different modes and operations. We assumed the following link cost function

C a ( F a ) = ( c + v t ) F a

where

F a = number of tons on link a ;

C a ( F a ) = cost of F a tons in USD;

c = cost per ton in USD;

t = time in days;

v = the value of time per ton per day.

Based on interviews with freight forwarders, we estimated the values of time (see Duan et al. [

For exports 3.5 USD/Tone/Day, for imports 5 USD/Tone/Day, and for Re-exports 7.5 USD/Tone/Day.

According to the available statistics for imports, exports and re-exports for Oman during the base year of 2012, the international trade volumes (available for imports, exports and re-exports) at three major seaports and two major land border points represented around 74% of the total weight in tons of Omani exports, imports and re-exports and around 90% of the total value of these observed international trade statistics for Oman. Hence, in this application we considered these major five points of entry/exit of international trade to/from Oman. These are three major seaports, namely Mina Sultan Qaboos (at Muscat), Mina Sohar and Mina Salalah (see

We obtained the following Import, Export and Re-Export Data for 2012 from the Omani National Centre for Statistics:

1) Commodity H.S Code (4 Digits);

2) Commodity Type;

3) Point of Entry;

4) Country of Export;

5) Observed Flows (in Kilogram and in Value of Omani Rial (OR)).

We obtained the following estimates of documents, times and costs of a typical 20-ft container for exports and imports, from the World Bank (WB) Report 2013 on Trading Across Borders (i.e., estimates for the year 2012) for Oman and UAE:

1) Documents to Export (number);

2) Time to Export (days);

3) Cost to Export (USD per 20-ft container);

4) Documents to Import (number);

5) Time to Import (days);

6) Cost to Import (USD per 20-ft container).

We then assumed that the estimates for re-exports of Documents, Times, and Costs are the same as those estimated for Exports according to the WB report indicated above (see

We obtained estimates for the International Maritime Transport Times (in days) and Costs (in USD per 20-ft container) for 2012 for Mina Sultan Qaboos from an International Freight Forwarder in Oman. We then assumed that these estimates are the same for Mina Sohar and Mina Salalah simply for lack of data and/or reliable estimates (see TableA1-5 in Appendix 1).

We further assumed that the commodities that go through the land border points Wadi Jizzi or Al Wajajah and not exported or imported from/to UAE, Saudi Arabia, Qatar, Bahrain, Kuwait, Jordan, Syria, and Iraq, will exit/enter from/to Jabil Ali Port in the UAE and their International Maritime Transport Times and Costs to/from other countries worldwide, from/to Jebel Ali Port are 20% less than the estimated values from/to Mina Sultan Qaboos.

All other commodities that go through the land border points Wadi Jizzi or Al Wajajah and exported or imported from/to UAE, Saudi Arabia, Qatar, Bahrain, Kuwait, Jordan, Syria, and Iraq are assumed to use only land transportation.

Mainly because of lack of appropriate detailed data and actual estimates from the field, we have invoked the previous assumptions and approximate estimates as well as the following general assumptions:

1) All 20-ft containers carry 10 tons per TEU (10000 KG), as assumed by WB reports.

2) All Points of Entry/Exit in Oman have the same procedures, costs, and times.

3) All Commodities have the same procedures, costs, and times at any Entry/Exit point.

4) Transit and Transhipment trade for Oman are excluded (for lack of data).

To achieve the main objectives, our focus has been on undertaking effective and efficient actions with particular focus on significantly improving procedures, times and costs of international trade processes and transactions across Omani ports. In view of the above and the estimates of documents, times and costs for Oman imports and exports as indicated in the WB Trading Across Borders country report 2013, we proposed the first two Scenarios 1 and 2 involving reductions in number of documents and their associated costs as well as port terminal handing times, as indicated in paragraph 5 below.

Considering that an important objective of enhancing Omani ports is to attract major shipping lines to Omani ports. This would contribute significantly to reducing international maritime transport times and costs, and consequently total international trade trip times and costs per ton. The total volumes of international trade with Oman would be expected to increase significantly as well. Hence, we proposed Scenarios 3 and 4 that involve reducing international maritime transport times and costs by 20% and 40% respectively. Scenarios 3 and 4 are also inclusive of Scenarios 1 and 2, as indicated in paragraph 5 below.

Based on the estimated GDP growth rate for 2013 (which was approximately 4%) we assumed that the average annual growth rate for prediction purposes in our analysis is 4% annually during the analysis period from 2012 through 2040.

For each scenario we predicted the expected increase in international trade flows of imports, exports and re-exports (in tons), the expected decrease in average total trip time (in days) and the expected decrease in total cost per ton (in USD). The predictions are estimated for the years following the completion of implementation of the alternative enhancement scenarios until the target year of 2040.

Based on the above mentioned assumptions, the description of the five scenarios considered in the analysis are as follows:

・ Scenario 0 (2012-2040)

The reference scenario “do nothing” and its prediction to the target year 2040.

・ Scenario 1 (2015-2040)

Reduce No. of Documents from 8 to 4 as of the year 2015.

・ Scenario 2 (2016-2040)

Scenario 1 plus Reduce Ports & Terminal Handling Time from 3 days for export and 2 days for import to 1 day for each as of the year 2016.

・ Scenario 3 (2017-2040)

Scenario 1&2 plus Reduce International Maritime Transport Times and Costs for Oman by 20% as of the year 2017.

・ Scenario 4 (2018-2040)

Scenario 1&2 plus Reduce International Maritime Transport Times and Costs for Oman by 40% as of year 2018.

In this section we summarize and analyze the results of the predicted international trade flows, times and costs of imports, exports and re-exports for Oman for all five alternative scenarios (i.e., the reference scenario (Scenario 0) and the four alternative enhancement Scenarios 1, 2, 3 and 4). The Appendix includes Tables A2-1-A2-3 that show the results of the IFSTEM-Oman Model predictions. The following paragraphs summarize the analysis of these international trade flows, times and costs results for Oman from the base year of 2012 through the target year of 2040.

Based on the assumptions invoked in Section 3 above, the IFSTEM-Oman Model was first used to replicate the current situation (i.e., the reference scenario (0) for base year 2012). The IFSTEM-Oman Model was applied to the 5 entry/exit points of Oman (i.e., 3 seaports and 2 land border points as indicated in section 3) using the 5 highest volume commodities crossing these points (see

The Import, Export and Re-Export Data for 2012 obtained from the Omani National Center for Statistics showed that there are 1128 commodities at the five points of entry/exit used in the analysis. The observed flows (volumes) for these 1128 commodities in 2012 were 27,338,746 tons and for all commodities crossing all points of entry or exit in Oman were 37,112,001 tons.

We then expanded the results of the IFSTEM-Oman Model to all exports, imports, and re-exports for Oman by multiplying the model results by the following expansion factor

37112001 811881 = 45.71113 .

This simple expansion factor is reasonable and consistent in this particular application of the model since the procedures, times and costs across commodities and entry/exit points in Oman were assumed to be equal. If and when the estimated and collected input data would involve variations among commodities and entry/exit points in Oman, the IFSTEM-Oman Model can then be easily applied to all commodities and all entry/exit points without the need to use an expansion factor.

Based on the assumed average annual growth rate of 4%, the predicted international trade flows for any future year 2012 + t up to the target year 2040 are computed as follows:

Predicted International Trade Flows for any future year 2012 + t = (Observed or Estimated International Trade Flows for year 2012) × (1.04)^{t}.

For IFSTEM-Oman Model application, the annual growth rate for the socio-economic variables E i and A i j are computed as follows:

E i For year 2012 + t = ( E i for year 2012) × (1.04)^{t};^{ }

A i j For year 2012 + t = ( A i j for year 2012) × (1.04)^{t}.^{ }

For example, the prediction for 2040 will use

E i For year 2040 = ( E i for year 2012) × (1.04)^{28};^{ }

A i j For year 2040 = ( A i j for year 2012) × (1.04)^{28}.^{ }

Below are Figures 2-4 that show the predicted international trade flow results of

In all cases, various international researchers and practitioners including the Authors have already established that the IFSTEM simultaneous transportation equilibrium models, such as the model adopted in this Paper, are able to produce better results than other commonly used models and analysis techniques worldwide such as trend analysis and the sequential traditional transport planning models when applied to similar situation of input data and estimates. This is due to various distinctive features of the simultaneous IFSTEM model mainly its ability to predict increases in total international trade flows within the model, and its internal consistency of predictions of flows and costs, unlike the sequential models. The references cited in the second progress report of the Paper clearly demonstrated these distinctive advantages of IFSTEM.

thepercentincrease = ( 162012098 − 37112001 ) 37112001 + 1 = 437 % as well as its predictions at the target year of 2040,

thepercentincrease = ( 162012098 − 110532300 ) 110532300 + 1 = 147 % .

absolute values of international trade flows at 2020, 2030 and 2040 for all 4 enhancement scenarios as well as the reference scenario. These figures show that the expected predictions of international trade for Scenario 4 at 2040 would reach around 187 million tons compared with the current volume of around 37 million tons, i.e., Scenario 4 would reach around 504% higher compared to the current flows in 2012. The difference would be around 70% higher for Scenario 4

compared to the predicted flows by 2040 if we do nothing until that time (i.e., around 110 Million tons).

It is worth noting that Scenario 4 implies that international maritime transport times and costs to Omani ports would be 20% less compared to that for Jebel Ali Port. Hence, for this Scenario 4 to be realized it would need extensive improvements and enhancements of competitiveness and integration of Omani ports relative to UAE ports. Of course, in reality, UAE as well as world ports are constantly improving and enhancing.

・ The proposed alternative enhancement scenarios were 4 nested scenarios, i.e., each scenario included the previous one plus an additional enhancement. Scenario 1 involved reducing the number of documents from 8 to 4, and Scenario 2 involved Scenario 1 plus reducing the time for port and terminal handling to 1 day (instead of 2 days for imports and 3 days for exports as estimated for 2012 by the World Bank trading across borders report 2013). Scenario 3 involved Scenarios 1 and 2 plus reducing the international maritime transport times and costs by 20% (i.e., to become equal to that of the UAE according to the application assumptions), and Scenario 4 involved Scenarios 1 and 2 plus reducing the international maritime transport times and costs by 40% (i.e., to become 20% less than that of UAE according to the application assumptions). These 4 enhancement scenarios were analyzed against and compared with scenario (0), i.e., the reference “do nothing” scenario.

・ The analysis has been achieved in two stages: The first stage involved the prediction of international trade flows (imports, exports and re-exports), times and costs that would result from the application of the 4 alternative enhancement scenarios during the analysis period through the target year of 2040; The second stage involved the assessment of the financial and economic feasibility of the implementation of the 4 alternative enhancement scenarios based on the predictions of stage one and assessment methodology of stage two. The prediction and assessment results were analyzed against the reference scenario.

・ The predictions were obtained using an advanced International Freight Simultaneous Transport Equilibrium Model adapted for Oman, i.e., IFSTEM-Oman Model. This IFSTEM-Oman Model belongs to the class of the distinguished simultaneous transport planning equilibrium models. The simultaneous planning models were developed over the past 50 years to overcome a few inherent deficiencies of the well-known traditional sequential transport planning models widely used until today by the majority of consultants and authorities worldwide.

・ Several recognized international researchers and practitioners over the previous few decades, including the authors of this paper, have established that the simultaneous equilibrium models consistently produce better predictions (i.e., internally consistent) compared to the sequential transport planning models. This is of course true when both models are compared under similar situations of input data availability and/or limitations.

・ The main advantages of the IFSTEM-Oman Model utilized in this paper are that it can predict the expected increase in the total international trade flows within the model in a simultaneous manner replicating the decision making process of the exporter and the importer, unlike the sequential modelling process that does not properly replicate the decision making process of the importer and the exporter and cannot predict the total international trade flows internally within the modelling process. Hence the IFSTEM-Oman Model predictions of international trade flows, times and costs are relatively more accurate and are internally consistent, unlike the sequential models.

・ The prediction results revealed that the estimated international trade flows (imports, exports and re-exports) for Oman for Scenario 4 would increase by more than 504% by 2040 ( i.e., around 187 million tons) compared to the present situation of the base year 2012 (i.e., around 37 million tons). This increase would represent around 70% compared to the “do nothing” reference scenario by the year 2040 (i.e., around 110 million tons) assuming that the average increase of international trade flows in the “do nothing” case would be around 4% annually during the analysis period from 2012 to 2040. The predictions of average total trip time and total cost per ton revealed an estimated decrease for Scenario 4 compared to the reference scenario by around 25% and 20% respectively. These results are internally consistent and represented reasonably significant improvements compared to the “do nothing” reference scenario.

Hasan, M.K. (2017) Application of International Freight Simultaneous Transportation Equilibrium Model to Sultanate of Oman. Journal of Service Science and Management, 10, 559-586. https://doi.org/10.4236/jssm.2017.106043

Input Data for IFSTEM-Oman Model

Oman | ||||
---|---|---|---|---|

Indicator | Export and Re-Export | Import | ||

Number of documents | 8 | 8 | ||

Time (days) | 10 | 9 | ||

Cost (US$ per container 20-foot) | 745 | 680 | ||

Export and Re-Export | Import | |||

Procedures | Time (days) | Cost (US$) | Time (days) | Cost (US$) |

Documents preparation | 5 | 285 | 5 | 250 |

Customs clearance and technical control | 1 | 65 | 1 | 65 |

Ports and terminal handling | 3 | 135 | 2 | 105 |

Inland transportation and handling | 1 | 260 | 1 | 260 |

Totals | 10 | 745 | 9 | 680 |

Documents to export | Documents to import | |||

Bill of lading | Bill of lading | |||

Certificate of origin | Cargo release order | |||

Commercial invoice | Certificate of origin | |||

Customs export declaration | Commercial invoice | |||

Packing list | Customs import declaration | |||

Shipping note (pre-advice form) | Packing list | |||

Technical standard certificate | Technical standard certificate | |||

Terminal handling receipts | Terminal handling receipts |

United Arab Emirates | ||||
---|---|---|---|---|

Indicator | Export and Re-Export | Import | ||

Number of documents | 4 | 5 | ||

Time (days) | 7 | 7 | ||

Cost (US$ per container 20-foot) | 630 | 590 | ||

Export and Re-Export | Import | |||

Procedures | Time (days) | Cost (US$) | Time (days) | Cost (US$) |

Documents preparation | 4 | 215 | 4 | 175 |

Customs clearance and technical control | 1 | 30 | 1 | 30 |

Ports and terminal handling | 1 | 180 | 1 | 180 |

Inland transportation and handling | 1 | 205 | 1 | 205 |

Totals | 7 | 630 | 7 | 590 |

Documents to export | Documents to import | |||

Bill of lading | Bill of lading | |||

Certificate of origin | Certificate of origin | |||

Commercial invoice | Commercial invoice | |||

Customs export declaration | Customs import declaration | |||

Packing list |

Oman | Point of Entry | Import | Export | Re-Export | |||
---|---|---|---|---|---|---|---|

Time | Cost | Time | Cost | Time | Cost | ||

Salalah | 2 | 320 | 2 | 320 | 2 | 320 | |

S Qaboos | 1 | 200 | 1 | 200 | 1 | 200 | |

Sohar | 1 | 250 | 1 | 250 | 1 | 250 | |

Wajajah | 1 | 270 | 1 | 270 | 1 | 270 | |

Wadi Jizzi | 1 | 270 | 1 | 270 | 1 | 270 |

Import | Export | Re-Export | ||||
---|---|---|---|---|---|---|

Time | Cost | Time | Cost | Time | Cost | |

UAE | 2 | 235 | 2 | 235 | 2 | 235 |

SAU | 4 | 835 | 4 | 835 | 4 | 835 |

Qatar | 4 | 835 | 4 | 835 | 4 | 835 |

Bahrain | 4 | 835 | 4 | 835 | 4 | 835 |

Kuwait | 4 | 835 | 4 | 835 | 4 | 835 |

Jordan | 5 | 835 | 5 | 835 | 5 | 835 |

Syria | 7 | 1335 | 7 | 1335 | 7 | 1335 |

Iraq | 5 | 835 | 5 | 835 | 5 | 835 |

Yemen | 2 | 320 | 320 | 320 | 2 | 320 |

No. | Country | Import time | Export time | Import cost | Export cost |
---|---|---|---|---|---|

1 | Afghanistan | 12 | 16 | 800 | 1200 |

2 | Albania | 32 | 30 | 1400 | 1100 |

3 | Algeria | 28 | 30 | 1600 | 1400 |

4 | Angola | 30 | 32 | 1700 | 1600 |

5 | Argentina | 35 | 40 | 2100 | 1900 |

6 | Australia | 40 | 45 | 1800 | 1900 |

7 | Austria | 35 | 40 | 2000 | 1800 |

8 | Azerbaijan | 28 | 30 | 1200 | 1400 |

9 | Bahamas | 24 | 26 | 1100 | 1300 |

10 | Bahrain | 14 | 16 | 600 | 800 |

11 | Bangladesh | 16 | 18 | 800 | 900 |

12 | Belarus | 24 | 28 | 900 | 1100 |

13 | Belgium | 26 | 30 | 1250 | 1350 |

14 | Benin | 35 | 40 | 2000 | 1800 |

15 | Bosnia Herzegovina | 40 | 45 | 1800 | 1900 |

16 | Botswana | 30 | 35 | 1100 | 1200 |

17 | Brazil | 55 | 60 | 2200 | 2400 |

18 | Bulgaria | 50 | 55 | 2100 | 2300 |

19 | Burundi | 50 | 55 | 2100 | 2300 |

20 | Cambodia | 55 | 60 | 2200 | 2400 |

HS_4DG | HS_4DG Description |
---|---|

207 | Meat and edible offal, of the poultry of heading 01.05, fresh, chilled or frozen. |

1511 | Palm oil and its fractions, whether or not refined, but not chemically modified. |

7304 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. |

7308 | Structures (excluding prefabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frame-works, doors and windows and their frames and thresholds for doors, |

8415 | Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity can’t be separately regulated. |

Prediction Results for IFSTEM-Oman Model

Year | The international trade in Tons for reference scenario | The international trade in Tons for Scenario 1 | The international trade in Tons for Scenario 2 | The international trade in Tons for Scenario 3 | The international trade in Tons for Scenario 4 |
---|---|---|---|---|---|

2012 | 37,112,001 | ||||

2013 | 38,573,610 | ||||

2014 | 40,094,540 | ||||

2015 | 41,677,192 | 42,306,557 | |||

2016 | 43,324,030 | 45,204,958 | 46,127,508 | ||

2017 | 45,037,530 | 48,362,077 | 49,349,058 | 52,498,998 | |

2018 | 46,820,380 | 51,407,063 | 52,456,186 | 55,804,454 | 59,366,440 |

2019 | 48,675,320 | 54,432,832 | 55,543,706 | 59,089,049 | 62,860,690 |

2020 | 50,605,240 | 57,987,449 | 59,170,866 | 62,947,730 | 66,965,670 |

2021 | 52,613,080 | 61,440,042 | 62,693,921 | 66,695,660 | 70,952,830 |

2022 | 54,701,890 | 65,041,367 | 66,368,742 | 70,605,045 | 75,111,750 |

2023 | 56,874,960 | 68,689,661 | 70,091,490 | 74,565,415 | 79,324,910 |

2024 | 59,135,620 | 72,661,872 | 74,144,767 | 78,877,412 | 83,912,140 |

2025 | 61,487,290 | 76,789,335 | 78,356,464 | 83,357,940 | 88,678,660 |

2026 | 63,933,620 | 81,089,265 | 82,744,148 | 88,025,689 | 93,644,350 |

2027 | 66,478,420 | 85,480,412 | 87,224,910 | 92,792,457 | 98,715,380 |

2028 | 69,125,580 | 90,144,317 | 91,983,997 | 97,855,316 | 104,101,400 |

2029 | 71,879,110 | 94,911,251 | 96,848,215 | 103,030,016 | 109,606,400 |

2030 | 74,743,250 | 99,797,596 | 101,834,281 | 108,334,342 | 115,249,300 |

2031 | 77,722,500 | 105,069,972 | 107,214,257 | 114,057,720 | 121,338,000 |

2032 | 80,821,330 | 110,254,975 | 112,505,077 | 119,686,252 | 127,325,800 |

2033 | 84,044,570 | 115,941,351 | 118,307,501 | 125,859,044 | 133,892,600 |

2034 | 87,397,110 | 121,806,282 | 124,292,124 | 132,225,664 | 140,665,600 |

2035 | 90,884,150 | 127,908,563 | 130,518,942 | 138,849,938 | 147,712,700 |

2036 | 94,511,100 | 134,114,496 | 136,851,526 | 145,586,730 | 154,879,500 |

2037 | 98,283,430 | 140,691,046 | 143,562,291 | 152,725,842 | 162,474,300 |

2038 | 102,207,100 | 147,425,281 | 150,433,960 | 160,036,128 | 170,251,200 |

2039 | 106,287,900 | 154,697,604 | 157,854,698 | 167,930,530 | 178,649,500 |

2040 | 110,532,300 | 162,012,098 | 165,318,467 | 175,870,710 | 187,096,500 |

Year | Total cost per Ton (USD) for reference scenario | Total cost per Ton (USD) for Scenario 1 | Total cost per Ton (USD) for Scenario 2 | Total cost per Ton (USD) for Scenario 3 | Total cost per Ton (USD) for Scenario 4 |
---|---|---|---|---|---|

2012 | 255.02 | ||||

2013 | 254.95 | ||||

2014 | 254.88 | ||||

2015 | 254.82 | 236.23 | |||

2016 | 254.76 | 236.36 | 235.987 | ||

2017 | 254.71 | 236.17 | 235.9573 | 219.859 | |

2018 | 254.66 | 236.39 | 236.096 | 219.0882 | 202.9488 |

2019 | 254.62 | 236.18 | 235.9646 | 218.8203 | 202.7789 |

2020 | 254.59 | 235.98 | 235.8499 | 219.4151 | 202.9237 |

2021 | 254.56 | 235.74 | 235.1868 | 219.3325 | 202.8828 |

2022 | 254.53 | 234.75 | 234.5462 | 219.2228 | 202.8038 |

2023 | 254.50 | 235.10 | 235.0502 | 219.1215 | 202.8226 |

2024 | 254.48 | 235.08 | 235.0682 | 219.2917 | 202.4824 |

2025 | 254.47 | 235.17 | 234.9347 | 219.3556 | 203.1174 |

2026 | 254.45 | 235.23 | 234.9049 | 219.4358 | 202.9796 |

2027 | 254.44 | 235.23 | 235.2696 | 219.2267 | 202.9078 |

2028 | 254.43 | 235.16 | 235.0936 | 219.2464 | 202.6981 |

2029 | 254.42 | 234.68 | 234.6168 | 219.034 | 202.6909 |

2030 | 254.42 | 234.33 | 234.3177 | 218.6331 | 202.8236 |

2031 | 254.41 | 234.08 | 233.7588 | 218.4723 | 202.6829 |

2032 | 254.41 | 233.82 | 233.5228 | 217.5586 | 202.4453 |

2033 | 254.41 | 233.65 | 233.5644 | 217.5911 | 201.9525 |

2034 | 254.41 | 233.22 | 233.3596 | 218.1222 | 201.8384 |

2035 | 254.41 | 233.77 | 233.4182 | 217.8148 | 201.8288 |

2036 | 254.42 | 234.63 | 233.728 | 218.0744 | 201.5846 |

2037 | 254.42 | 233.58 | 233.114 | 218.3752 | 201.7465 |

2038 | 254.43 | 233.42 | 233.2973 | 217.5719 | 201.7378 |

2039 | 254.43 | 234.53 | 234.1501 | 218.197 | 201.6447 |

2040 | 254.44 | 234.17 | 234.1394 | 218.3735 | 202.1851 |

Year | Average times in days for reference scenario | Average times in days for Scenario 1 | Average times in days for Scenario 2 | Average times in days for Scenario 3 | Average times in days for Scenario 4 |
---|---|---|---|---|---|

2012 | 42 | ||||

2013 | 42 | ||||

2014 | 42 | ||||

2015 | 42 | 39 | |||

2016 | 42 | 39 | 38 | ||

2017 | 42 | 39 | 38 | 35 | |

2018 | 42 | 39 | 38 | 35 | 32 |

2019 | 42 | 39 | 38 | 35 | 32 |

2020 | 42 | 39 | 38 | 35 | 32 |

2021 | 42 | 39 | 38 | 35 | 32 |

2022 | 42 | 39 | 38 | 35 | 32 |

2023 | 42 | 39 | 38 | 35 | 32 |

2024 | 42 | 39 | 38 | 35 | 32 |

2025 | 42 | 39 | 38 | 35 | 32 |

2026 | 42 | 39 | 38 | 35 | 32 |

2027 | 42 | 39 | 38 | 35 | 32 |

2028 | 42 | 39 | 38 | 35 | 32 |

2029 | 42 | 39 | 38 | 35 | 32 |

2030 | 42 | 39 | 38 | 35 | 32 |

2031 | 42 | 39 | 38 | 35 | 32 |

2032 | 42 | 39 | 38 | 35 | 32 |

2033 | 42 | 39 | 38 | 35 | 32 |

2034 | 42 | 39 | 38 | 35 | 32 |

2035 | 42 | 39 | 38 | 35 | 32 |

2036 | 42 | 39 | 38 | 35 | 32 |

2037 | 42 | 39 | 38 | 35 | 32 |

2038 | 42 | 39 | 38 | 35 | 32 |

2039 | 42 | 39 | 38 | 35 | 32 |

2040 | 42 | 39 | 38 | 35 | 32 |