Ultrasound-assisted pretreatment under mild operating conditions has been investigated for intensification of delignification to facilitate the obtaining of ethyl levulinate from biomass. The effect of pH (2 - 12), temperature (30°C - 70°C) and pretreatment time (0 - 120 minutes) has been studied for different biomass samples. The most favorable conditions were basic pH, temperature of 70°C and pretreatment time of 2 h, obtaining values of delignification near 80 percent. The ethyl levulinate is obtained in microwave directly via from samples before and after delignification and analyzed for GC-MS. The results evidenced better yields for the delignified samples.
Some environmental impacts have been widely discussed in recent years, and one of the main reasons has been the establishment of public policies aimed at ecological sustainability. Large amounts of lignocellulosic waste generated through forestal and agricultural practice, such as paper-pulp industries, timber industries and many agro-industries are generating serious environmental pollution problems. In this regard, the use of organic waste as a base for obtaining new substances or value-added chemical has opened the possibility of using biomass generated by various agro-industrial processes for the production of biofuels. Lignocellulosic biomass is a versatile renewable feedstock for biorefining of which the main constituents are the biopolymers cellulose, hemicellulose, and lignin. The efficient fractionation of lignocellulosic biomass into its main components, so that all fractions may be valorized, is a prerequisite for economic lignocellulosic biorefinery [
Most of the research on lignocellulosic residues focuses on chemical components for animal feed supplement, soil conditioners, fermentative production of metabolites of interest and generation of bio-energetics [
One of those products of interest is the ethyl levulinate, a compound used as a fuel additive [
Most of the studies on obtaining ethyl levulinate had used waste directly without a prior chemical treatment, which is usually done frequently, primarily for obtaining bioethanol by enzyme [
Currently there are several biological, physical and chemical technologies for pretreatment of biomass such as use of enzymes [
Those pretreatment separates lignin from carbohydrates, which limits the accessibility of enzymes or chemicals to cellulose and hemicellulose. The main objective of pretreatment is to increase accessibility to cellulose and improve his digestibility. Each treatment (physical, biological, thermal and chemical proce- sses) has a specific effect on different fractions of cellulose, hemicellulose and lignin [
The pretreatment processes for delignification more frequently used are acid hydrolysis, hydrothermal pretreatment, alkaline pretreatment microwave assisted, low-temperature pretreatment using mixtures of ethylene carbonate and ethylene glycol [
Since so far, only some of these methods has shown high efficiencies for poor performance and intensive energy and capital cost. In this study we propose some experimental optimizations that will generate higher content of lignocellulosic material using a pretreatment for delignification before obtaining the ethyl levulinate. Delignification by ultrasonic-assisted is a good option, because of the cavitation produced, the bonds must be broken more easily, occurring the reaction faster and with lower consumption of reagents.
Sulfuric acid (ACS, CIVEQ), Ethanol (ACS, HYCEL), Ethyl Levulinate (ALDRICH), Sodium Hydroxyde (REASOL), Hydrochloric Acid (ACS, CIVEQ).
Lignocellulosic residues used were obtained from different places in the state of Morelos; wheat straw (Triticum aestivum. L.) was provided by the Center for Biological Research of the UAEM; maguey bagasse (Agave tequilana) in Miacatlan and sugarcane bagasse (Saccharum lubridatium) by Emiliano Zapata sugar mill in Zacatepec (
The samples were dried at 105˚C to constant weight, then crushed with a blade mill and stored at room temperature in ziploc bag.
The delignification experiments were performed in ultrasonic bath (SB-5200
DTN) and all experiments were conducted in a 150 ml glass balloon with ratio of 1:20 (lignocellulosic mass: solution volume) at reflux using five level and three variables. Assessment of the delignification procedure was done for the following independent variables: (1) pH, (2) temperature and (3) reaction time.
The chemical characterization of the pulp was obtained by determining the quantity of acid-insoluble lignin (the Klason lignin method) according to the Technical Association of the Pulp and Paper Industry (TAPPI) standard method T222 om-02. In the Klason method, the sample is hydrolyzed by a sulfuric acid solution, and the acid insoluble lignin is separated from the hydrolysate through filtration. The acid-insoluble lignin was oven-dried at 105˚C and weighed.
The experiments were carried out with the samples obtained from delignification process, reacted with acidified ethanol in a microwave equipment with a power of 100 watts to reflux for 10 minutes, at a temperature of 70˚C. The samples were filtered and the ethanol extract was concentrated on a rotary evaporator. Finally the concentrated samples were extracted for liquid- liquid extraction with toluene before analysis.
Ethyl levulinate soluble in toluene was determined on a GC (Agilent 6890 instrument) equipped with mass selective detector (Agilent 5973) by impact electronic 70 eV. The sample was injected 1 µl and separated on HP-5MS capillary column (30.0 m × 0.25 mm × 0.25 µm) and programmed temperature configured ranged of 45˚C to 285˚C with helium as the carrier gas. Because quantification was performed a calibration curve in a range of 0.3 - 4.5 mg/ml.
The delignification process is affected by different factors, among which is the pH for hydrolysis of lignin. Experiments were performed changing the pH from 2 to 12 (
In the case of wheat straw, in a pH range of 2.0-5.0, the results indicated no great difference to the concentration of extracted lignin. From pH 5.0, begins to increase efficiency in the extraction of lignin, reaching maximum efficiency at a pH of 12.0, that behavior can probably be explained by the complex structure of lignin and reactions of rupture of the links occur under these conditions.
Lignin reactions under acidic conditions when light (concentrations < 1.0 M) results in an autocatalytic break of bonds formed between lignin and hemicellulose. The most important reaction via during acidolysis lignin is the breaking of bonds β-O-4 (
Another proposed route also involves the breakdown of the β-O-4 bonds, generating formaldehyde from the γ position and another type enol-ether structure, is described in
Another cleavage reaction of lignin which occurs in acidic medium is the breaking of bonds α-ether. Similar to the links β-ethers, α-aryl ethers are rapidly hydrolysed being responsible for the formation of lignin components of low weight molecular.
Few treatments in obtaining fuel additives from biomass using high pH (9.0 - 12.0). Frequently for pulping lignin obtaining, is used alkaline reaction at high temperatures. The C-C bonds are relatively stable under these conditions, while the C-O bonds are easier to break.
Ruptures α-ethers bonds occur when have free OH phenolic groups present in the para position relative to the chain Propyl, facilitating the formation of the intermediary methyl-quinone during the reaction. The α-ethers bonds non- phenolic can also be broken if the OH group is adjacent to the β position forming as intermediary an epoxide. The breaking of bonds β-O-4 occurs if there is OH group or carbonyl adjacent to the α and γ position.
Overall, the results for lignin extracted from samples indicated that the percentage of delignification, obtained under basic pH values, were higher than those obtained by acid conditions, probably the breaks of the α and β bonds are favored; indicating that the structure of the lignin in the three samples are OH groups in para position or adjacent to α and γ position. Some methods have used acid hydrolysis pretreatment [
To study how reaction time influence in the delignification process for ultrasound assisted, was analyzed lignin extracted variation versus reaction time for different waste (
The effect of pretreatment time in the extraction of lignin in the solid residue, indicates that in the first 60 minutes of reaction, the greatest efficiency is achie-
ved in removal of lignin, studied for three residues, it is the sugarcane bagasse which introduced greater efficiency; while wheat straw and maguey bagasse showed the same behavior. After 60 minutes, was not observed a significant change in efficiency, probably it is indicating that the balance between the compounds of lignin degradation dissolved in solution and those formed on the surface of the residue is determined by saturation of the solution.
The temperature for the pretreatment of the samples was varied from 30˚C to 70˚C (
As expected with increasing temperature concentration lignin extracted at the same reaction time increases, because more energy is supplied facilitating the breaking of bonds and increasing the solubility of the compounds formed in the liquid medium; in general the rate at which the reaction occurs, increases until it reaches a maximum that is likely to increase the number of molecules with enough energy to pass the transition state to products.
The observed results demonstrate for the three residues studied, than the greatest efficiency of delignification with 60% - 85% was obtained to 60˚C - 70˚C. These results are consistent with those found in other studies, for example (Iskalieva 2012) reported percentages up to 78% for wheat straw residues using ultrasound assisted, meanwhile (Pasquini 2005) found percentages close to 88%
using a pressurized fluid system with carbon dioxide, while Monteil-Rivera reported 91% using microwave assisted extraction.
The synthesis of the ethyl levulinate assisted microwave is used due to its advantages in terms of saving time and energy. For determining the amount of ethyl levulinate obtained, the organic extracts were concentrated on a rotary evaporator to remove ethanol excess, then extraction with toluene was performed to separate the ethyl levulinate from the aqueous extract. The organic concentrated extract was analyzed by gas chromatography coupled to mass spectrometry.
The best results were obtained in the samples that were previously delignified. The concentrations of ethyl levulinate were 3 to 1 frequency better for deligni- fied samples, regarding was not performed prior treatment, obtaining better results in wheat straw, and lesser grade in sugarcane bagasse and maguey bagasse.
When the delignification process is assisted by ultrasonic, the best results are obtained for alkaline, pH favored likely the formation of peroxydril radicals, and also under these conditions, the phenoxy radical is an oxidized form of lignin and is much more hydrophilic than this, allowing the formed lignin to be removed more easily. The temperature favored the delignification increases because it increases the kinetic energy and gets more quickly to the formation of the activated complex, obtaining the best results for the three samples between 60˚C and 70˚C. For this process, using other methods are required long time intervals, however, the method assisted by ultrasound reaches a maximum extraction when the process is in 1 hour. Therefore, ultrasonically assisted delignification allows us to obtain good delignification at relatively low temperatures (60˚C) in an alkaline medium and the shortest reaction time, implying lower power consumption than other methods. The process of delignification also
favors obtaining ethyl levulinate, as the lignin has been removed completely or partially, allowing the reagents acting more directly on the holocellulose. In all cases they were observed a difference between the untreated and delignified samples.
Solá-Pérez, J.E., Saldarriaga-Noreña, H. and Murillo-Tovar, M. (2017) Ethyl Levulinate Obtained from Lignocellulosic Waste Material with Previous Delignification by Ultrasonic-As- sisted Technique. Journal of Agricultural Chemistry and Environment, 6, 93-103. https://doi.org/10.4236/jacen.2017.61006