Metalation regioslectivity of 3,5-dichlorobenzamides is a function of the type of amide (secondary versus tertiary) used in the sequence. Metalation at the 2-position (adjacent to the carboxamide functional group) occurs when the secondary benzamide is metalated with sec-butyllithium/ TMEDA mediated through complex-induced proximity effects (CIPE) process, whereas metalation with sec-butyllithium/TMEDA occurs exclusively at the 4-position when the tertiary benzamide is used under identical reaction conditions.
Among the most powerful techniques for the introduction of electrophilic functional groups onto an aromatic or heteroaromatic ring system is that of Directed ortho-Metalation (DoM) [
We have previously reported an unexpected regioselectivity observation for the metalation of 3,5-dichloro- N,N-diethylbenzamide 1 [
For the case of tertiary benzamide systems (Scheme 1), 1.0 - 1.2 molar equivalents of sec-butyllithium is typically employed for metalation, whereas the secondary benzamide requires a minimum of 2.0 molar equivalents of metalating agent, the first equivalent consumed in the generation of the anion 5 resulting from the acid-base reaction with the carboxamide functional group (Scheme 2). Through complex-induced proximity effects [
As before, sec-butyllithium was employed as the metalating agent with aromatic aldehydes used as electrophiles. However, in this case we isolated isobenzofuranones of the type 6 resulting from sequential ortho-metal- ation to form the bis-metalated intermediate 5 followed by nucleophilic addition to the aldehyde and subsequent intramolecular cyclization [
This study reveals that there are substantial differences in the degree of complexation (CIPE) of the metalating agent to the secondary versus tertiary carboxamide functional group in poly-substituted aromatic systems bearing other directing groups. These differences can and do play a major role in the regiospecificity of metalation reactions [
General. Tetrahydrofuran was purchased as anhydrous (Fluka) and was stored under a nitrogen blanket and over molecular sieves. Sec-Butyllithium (1.3 M in cyclohexane/hexane) was purchased from Acros Organics or Sigma-Aldrich. 1H NMR (300 MHz) and 13C NMR (75 MHz) data were obtained from a Varian Gemini 300 nuclear magnetic resonance spectrometer referencing tetramethylsilane and utilized CDCl3 lock. IR data were obtained from a Perkin-Elmer Model Spectrum 2000 FT-IR spectrometer. GC/MS data were obtained from an Agilent Technologies 6850 GC/5973 MSD. Microanalyses were performed by Intertek, Whitehouse, NJ. All melting points were obtained from a Mel-Temp heating block apparatus and are uncorrected.
Scheme 1. Para-Metalation/elaboration of a tertiary 3,5-dichlorobenzamide.
Scheme 2. Ortho-Metalation/elaboration of a secondary 3,5-dichlorobenzamide.
Metalation of 3,5-Dichloro-N,N-Diethylbenzamide: General Reaction Procedure for the Preparation of 3a-d. To a flask containing 246 mg (1.00 mmol) of 3,5-dichloro-N,N-diethylbenzamide and 5 mL of anhydrous diethyl ether was added a solution of TMEDA (1.2 equiv) in 2 mL of anhydrous diethyl ether. The resulting solution was cooled with magnetic stirring to −78˚C. To the resulting white suspension was added 1.2 equiv of sec-BuLi in cyclohexane dropwise. The resulting yellow suspension was stirred at −78˚C for 30 min, at which point the aryl aldehyde (1.5 equiv) in 2 mL of anhydrous ether was added drop wise to the reaction mixture. The resulting mixture was allowed to slowly warm to ambient temperature and was stirred an additional 2 h. The mixture was quenched by addition to water. The ether layer was separated, sequentially washed with water and 2 N HCl, dried (MgSO4), filtered, and concentrated. The residue was triturated with petroleum ether to afford the final product.
3,5-Dichloro-N,N-diethyl-4-(hydroxyphenylmethyl)benzamide (3a) was obtained as a colorless solid (152 mg; 54%): 1H NMR (300 MHz, CDCl3) δ 1.18 (br m, 3H), 1.26 (br m, 3H), 3.23 (br m, 2H), 3.52 (br m, 2H), 6.65 (s, 1H), 7.26 - 7.36 (m, 7H); 13C NMR (75 MHz, CDCl3) δ 12.9, 14.3, 39.6, 43.4, 72.1, 125.5, 127.4, 128.4, 135.5, 138.5, 138.9, 141.0, 167.9; IR (KBr) 3411, 2990, 1612, 1541, 1285, 1070 cm−1; mp 129˚C - 131˚C; MS: m/z = 351, 353, 355 (M+). Anal. Calcd for C18H19NO2Cl2: C, 61.37; H, 5.44; N, 3.98; Cl, 20.13. Found: C, 61.36; H, 5.37; N, 4.01; Cl, 20.23.
3,5-Dichloro-N,N-diethyl-4-(hydroxy-p-tolylmethyl)benzamide (3b) was obtained as an off-white solid (161 mg; 55%): 1H NMR (300 MHz, CDCl3) δ 1.18 (br m, 3H), 1.26 (br m, 3H), 2.35 (s, 3H), 3.23 (br m, 2H), 3.52 (br m, 2H), 6.61 (s, 1H), 7.16 (bs, 4H), 7.36 (s, 2H); 13C NMR (75 MHz, CDCl3) δ 12.9, 14.3, 21.2, 39.6, 43.4, 72.2, 125.4, 127.2, 129.1, 135.4, 137.2, 137.9, 138.4, 138.8, 167.9; IR (KBr) 3409, 1612, 1495, 1274, 1070 cm−1; mp 154˚C - 155˚C; MS: m/z = 365, 367, 369 (M+). Anal. Calcd for C19H21NO2Cl2: C, 62.30; H, 5.78; N, 3.82; Cl, 19.36. Found: C, 61.83; H, 5.74; N, 3.63; Cl, 19.25.
3,5-Dichloro-N,N-diethyl-4-[hydroxy-(4-methoxyphenyl)methyl)benzamide(3c) was obtained as an off- white solid (174 mg; 56%): 1H NMR (300 MHz, CDCl3) δ 1.18 (br m, 3H), 1.26 (br m, 3H), 3.23 (br m, 2H), 3.52 (br m, 2H), 3.81 (s, 3H), 6.58 (s, 1H), 6.87 (d, J) 8.6 Hz, 2H), 7.20 (d, J) 8.6 Hz, 2H), 7.36 (s, 2H); 13C NMR (75 MHz, CDCl3) ä 12.9, 14.3, 39.6, 43.4, 55.3, 72.1, 113.8, 126.8, 127.2, 132.9, 135.4, 138.5, 138.8, 159.0, 167.9; IR (KBr) 3384, 1607, 1510, 1251, 1050 cm−1; mp 117˚C - 118˚C; MS: m/z = 381, 383, 385 (M+). Anal. Calcd for C19H21NO3Cl2: C, 59.70; H, 5.54; N, 3.66; Cl, 18.55. Found: C, 59.54; H, 5.44; N, 3.60; Cl, 18.86.
3,5-Dichloro-N,N-diethyl-4-[hydroxy-(4-isopropylphenyl)-methyl)benzamide(3d) was obtained as an off- white solid (153 mg; 48%): 1H NMR (300 MHz, CDCl3) δ 1.18 (br m, 3H), 1.26 (br m, 3H), 1.25 (d, J) 3.4 Hz, 6H), 2.91 (m, 1H), 3.23 (br m, 2H), 3.52 (br m, 2H), 6.61 (s, 1H), 7.20 (bs, 4H), 7.36 (s, 2H); 13CNMR (75 MHz, CDCl3) δ 12.9, 14.3, 33.7, 39.6, 43.4, 72.3, 125.5, 126.5, 127.2, 135.4, 138.2, 138.5, 138.8, 148.1, 167.9; IR (KBr) 3422, 2965, 1615, 1541, 1283, 1079 cm−1; mp 154˚C - 157˚C; MS: m/z = 393, 395, 397 (M+). Anal. Calcd for C21H25NO2Cl2: C, 63.96; H, 6.39; N, 3.55; Cl, 17.98. Found: C, 63.89; H, 6.41; N, 3.48; Cl, 17.67.
Metalation of 3,5-Dichloro-N-Ethylbenzamide: General Reaction Procedure for the Preparation of 6a-d.
To a 100 mL three-neck oven-dried flask equipped with a stir bar, nitrogen inlet, and low temperature thermocouple were added the 3,5-dichloro secondary benzamide (1.00 mmol), anhydrous THF (5 mL), and TMEDA (290 mg; 2.5 mmol) in anhydrous THF (5 mL). The mixture was cooled to −78˚C using a dry ice/acetone bath, and sec-butyllithium (2.5 equivalents relative to the starting benzamide) was added while the temperature was maintained at or below −70˚C. The reaction was stirred for 30 min at which point a solution of 1.5 equivalents of an aromatic aldehyde in anhydrous THF (2 mL) was added. The reaction was allowed to warm to room temperature overnight under nitrogen and the mixture was quenched with water (100 mL). The mixture was then extracted with ethyl acetate (3 × 40 mL), with occasional use of saturated brine (35 mL) to alleviate emulsion formation. The organic layer was washed with a solution of saturated ammonium chloride (40 mL), dried (MgSO4), filtered, and concentrated in vacuo to afford the crude product. Purification was achieved by chromatography on silica gel (9:1 hexanes/MTBE) or a combination of trituration/chromatography.
4,6-Dichloro-3-phenylisobenzofuran-1(3H)-one (6a) was isolated as a white solid (chromatography), 1H nmr (CDCl3): δ 7.85 (d, Jm-H = 1.7 Hz, 1, ArH), 7.60 (d, Jm-H = 1.7 Hz, 1, ArH), 7.40 - 7.16 (m, 5, ArH), 6.35 (s, 1, CHO). 13C nmr (CDCl3): δ 168.1, 144.9, 137.1, 135.0, 133.8, 130.8, 130.1, 129.9, 129.2, 128.4, 124.4, 82.7; IR: 1776 (lactone) cm−1; mp. 118˚C - 120˚C; MS: m/z = 278, 280, 282 (M+). Anal. Calcd for C14H8Cl2O2; C, 60.24; H, 2.89. Found: C, 60.46; H, 2.71.
4,6-Dichloro-3-(furan-2-yl)isobenzofuran-1(3H)-one (6b) was isolated as an off-white solid (chromatography), 1H nmr (CDCl3): δ 7.83 (d, Jm-H = 1.5 Hz, 1, ArH), 7.63 (d, Jm-H = 1.5 Hz, 1, ArH), 7.38 (dd, JfuranH2,H3 = 2.0 Hz, JfuranH2,H4 = 0.8 Hz, 1, ArH) 6.50 (dd, JfuranH4,H3 = 3.3 Hz, JfuranH4,H2 = 0.6 Hz, 1, ArH), 6.40 (s, 1, CHO), 6.39 (dd, JfuranH3,H4 = 3.6 Hz, JfuranH3,H2 = 1.8 Hz, 1, ArH). 13C nmr (CDCl3): δ 167.5, 146.1, 144.5, 142.1, 137.4, 134.8, 130.8, 130.2, 124.5, 112.6, 111.1, 74.8; IR: 1778 (lactone) cm−1; mp. 115.5˚C - 117˚C; MS: m/z = 268, 270, 272 (M+). Anal. Calcd for C12H6Cl2O3; C, 53.56; H, 2.25. Found: C, 53.27; H, 2.25.
4,6-Dichloro-3-(thiophen-2-yl)isobenzofuran-1(3H)-one (6c) was isolated as an off-white solid (trituration/ chromatography), 1H nmr (CDCl3): δ 7.84 (d, Jm-H = 1.8 Hz, 1, ArH), 7.64 (d, Jm-H = 1.5 Hz, 1, ArH), 7.38 (dd, JH2,H3 = 5.4 Hz, JH2,H4 = 0.9 Hz, 1, ArH), 7.14 (dd, JH4,H3 = 3.6 Hz, J = 1.2 Hz, 1, ArH), 7.01 (dd, JH3,H2 = 5.1 Hz, JH3,H4 = 3.6 Hz, 1, ArH), 6.63 (s, 1, CHO). 13C nmr (CDCl3): δ 167.3, 144.1, 137.4, 136.4, 135.0, 130.9, 129.4, 128.2, 127.3, 127.1, 124.4, 77.2; IR: 1774 (lactone) cm−1; mp. 107.5˚C - 109.5˚C; MS: m/z = 284, 286, 288 (M+). Anal. Calcd for C12H6Cl2O2S; C, 50.54; H, 2.12. Found: C, 50.83; H, 2.31.
4,6-Dichloro-3-(4-methoxyphenyl)isobenzofuran-1(3H)-one (6d) was isolated as a white solid (trituration/chromatography),; 1H nmr (CDCl3): δ 7.84 (d, Jm-H = 1.5 Hz, 1, ArH), 7.59 (d, Jm-H = 1.8 Hz, 1, ArH), 7.10 (d, Ja,b = 9.0 Hz,2, ArH), 6.86 (d, Jb,a = 9.0 Hz, 2, ArH), 6.32 (s, 1, CHO), 3.79 (s, 3, OCH3). 13C nmr (CDCl3): δ 169.0, 160.8, 145.0, 136.9, 134.8, 130.7, 129.8, 129.7, 125.6, 124.2, 114.4, 82.4, 55.5; IR: 1773 (lactone) cm−1; mp. 107.5˚C - 109˚C;. MS: m/z = 308, 310, 312 (M+). Anal. Calcd for C15H10Cl2O3; C, 58.28; H, 3.26. Found: C, 58.30; H, 3.31.
We would like to thank the Department of Chemistry, The College of New Jersey for partial financial support of this work.
Francesca Khani,Tina Fleming,Carleton Collins,Erica Tabakin,Lynn M. Bradley,David A. Hunt, (2016) Regioselectivity Differentiation in Metalations of 3,5-Dichloro-Tertiary versus Secondary Benzamides. International Journal of Organic Chemistry,06,142-146. doi: 10.4236/ijoc.2016.62015