The main objective of this research was to use ground magnetic survey to delineate shear zone and iron ore deposit within the Neoproterozoic rocks of Mutomo-Ikutha area of south eastern Kenya. Total field magnetic data was recorded by using high resolution proton precision geometric magnetometer which recorded total components of the ground magnetic anomaly data running through sixteen traverses. The field data was qualitatively and quantitatively interpreted and the results gave values for the total component measurements of ground magnetic anomaly that varied between a minimum negative peak value of about 250 nanoTesla and a maximum of about 1000 nanoTesla. 550 nanoTesla was considered to be threshold of the iron mineralization within the area. The results indicated that the western part of Mutomo-Ikutha was sheared, faulted and contained iron ore mineralization trending in the north-south direction. Areas with high anomalous values were geochemically proven to contain magnetite.
The use of magnetic data is a geophysical exploration technique based on mapping the subsurface distribution of magnetic minerals (oxides or sulphides). This technique can be a valid approach to mineral exploration either directly for mineral deposits containing magnetic minerals (e.g. magnetite, hematite, pyrhotite) or indirectly for the ones spatially associated with, for example, faults. Advances in spatial controls using global positioning systems (GPS) have not only reduced the survey costs but also increased data accuracy.
Total magnetization of rock is a vector sum of the two components: 1) induced magnetization (proportional in magnitude and generally parallel to the earth’s ambient field); and 2) remnant magnetization (which has direction and intensity dependent on the origin and geological history of the rock). The intensity of induced magnetization is related to the ambient field through the magnetic susceptibility of the rock considered (Hildenbrand et al. [
Rocks have widely varying magnetic properties (Carmichael [
The main objective of this research was to investigate and determine the surface and subsurface distribution of the iron ore mineralization within the shear zone so as to establish its economic potential.
The study area is located between longitudes 38˚4'E to 38˚20'E and latitudes 1˚48'S to 2˚8'S in South Kitui within the Kitui County in the republic of Kenya (
Mutomo-Ikutha area occurs within the Neoproterozoic Mozambique Belt. This belt is a major N-S trending metarmophic and lithotectonic domain that extends along the Eastern Coast of Africa, as well as in Saudi Arabia, Madagascar, India and Sri Lanka. It was first defined by Holmes [
The Mutomo-Ikutha area is a medium- to high-grade gneiss terrane which comprises predominantly amphibolite-grade metasediments (pelitic, semi-pelitic, quartzo-felspathic, calc-silicate rocks, quartzite and marble migmatizedparagneisses), metavolcanics and intrusives (see
The following mineral assemblages are represented by the lithologies within Mutomo-Ikutha;
・ Hornblende + Quartz + Biotite + Magnetite + Apatite ± Plagioclase, Microcline
・ Quartz + Plagioclase ± hornblende, biotite, muscovite, Magnetite and apatite
・ Hornblende + Quartz + Plagioclase + Biotite ± Epidote, apatite, Iron ore, Garnet, Zircon
・ Hornblende + Hypersthene + Quartz + Plagioclase + Diopside + Apatite + Biotite + Magnetite
・ Hornblende + Quartz + Plagioclase + Myrmekite + Biotite + Diopside ± Apatite, zircon, sericite, iron ore)
・ Plagioclase + Hornblende ± Biotite, Diopside, Hypersthene, Calcite, Sphene, Apatite, Magnetite.
Geophysical investigation utilizes the measurements of physical quantities that are made at or above the ground surface and are used to investigate concealed geology. Proton magnetometer was used in this investigation. The subsurface structures in a part of the southern part of Ikutha area were estimated by the interpretation of ground magnetic data. Magnetic survey was used to delineate magnetic lineaments, analyze its relationship to tectonic fabric and estimate the depth of perturbing body source.
Total intensity magnetic field measurements were carried out with MP2 SCINTREX proton precession magnetometer made by Scintrex Company of Canada with one nanoTesla (nT) sensitivity (
In a particular survey, additional constraints were applied that allowed the magnetic observations to be used in a quantitative fashion. This information was derived from other separate data sets, for example, formation layering from geological mapping. The general trend of the rock units was in the northwest direction. A magnetic survey was designed to estimate the spatial extent of the structure and its susceptibility by in-lab forward
modeling. In planning the magnetic survey, the noise was predicted from sources not of interest in the survey, estimated the standard deviation of the random (operator and instrument) noise, calculated the shape of the signal (the theoretical anomaly produced by the assumed source), then decided whether the signal generated by the target of interest was above the noise level that allowed a meaningful interpretation to be conducted.
The Magnetic survey orientation in Mutomo-Ikutha area was in the northeast-southwest profile across the general strike of the rock units in the area. Survey was carried out at an interval of 20 m along each profile and 250 m from one profile to the next. MP2 SINTREX proton precession magnetometer was used to carry out the survey (
1) Diurnal variation correction
Variation of earth’s magnetic field with time, due to the rotation of the earth and with respect to the solar wind, which may last for several hours to one day, is called diurnal variation (Riddihough [
where Drift is the drift of measurement in a loop; B base,f and B base,i are the final and initial total magnetic field at the base station; tbase,f and tbase,i are the final and initial time at the base station.
The drift corrected field at any station in the loop for a given day was calculated from:
where Bdrift,n is corrected magnetic field at the nth station in the loop; Bn is the total magnetic field at the nth station; tn is the measuring time at the nth station; tbase is the measuring time at the first station of the loop.
2) Removal of geomagnetic field
The regional magnetic field, often referred to as geomagnetic field, is needed to be subtracted from the acquired total magnetic field to obtain the magnetic field anomaly caused by the local source (Parasnis [
by using the mathematical model of earth magnetic field called International Geomagnetic Reference Field (IGRF) model 2000-2015 in potent software, a product of Geosoft Oasis Montaj software. This model is calculated based on the dates, elevation and geographical locations (latitudes and longitudes) of the observed magnetic data with the generated average geomagnetic field of 33,000 nT, inclination of −25.3˚ and declination of 0.4˚. The IGRF values were subtracted from the observed magnetic values for each station to determine the residual magnetic field due to anomalous contribution from local magnetic sources in the area.
Geochemical investigations were carried out to establish the chemical composition of the geological material that was anomalous. Geochemical survey involved fieldwork and the samples collected were analyzed using a variety of analytical techniques. Amongst the instrumental methods used in analysis included atomic absorption spectrometry (AAS) and X-ray fluorescence (XRF). Detailed identification of individual minerals was undertaken by using a polarizing microscope.
The results obtained were used to delineate the iron mineralized zone. Both 3D Euler deconvolution and 2D Euler deconvolution were used to synthesize the results. 3D Euler deconvolution utilizes XYZ (X = length along X axis, Y = length along Y axis, Z = length along the Z axis) values to provide the subsurface geophysical information. 2D data interpretation gave information along designated profiles and the depth. The obtained values were corrected for the normal gradient of the earth’s magnetic field (IGRF); the corrected magnetic values were plotted using Euler 2D and Oasis Montaj.
The high anomalous values plot on the western part of the area of survey (Figures 5-7). These values display a
linear trend which is in the north-south direction. This trend shows that the geological body/structure having anomalous values occurs closer to the surface trending in the north-south direction. The high anomalous values range from 550 nT - 1000 nT.
High magnetic anomaly is observed from 0 - 160 meters below the surface along all the profiles (Figures 8-11), indicating the presence of a geological body which is closer to the surface. The anomalous values indicate mineralization which varies along each profile. Geological material analyzed is found to be magnetite hosted in hornblende gneiss (
Extensive geological, field proving and geochemical investigations were carried out for the areas with anomalous values and delineated in the studied gneisses by the magnetic survey. During the field works, the geochemical investigations revealed that the Fe2O3 was relatively high in the sheared gneisses. The mineralized zones were found to be mainly connected or hosted by the hornblende gneisses that followed the direction of the strong and nearly vertical shear zone striking N320W-S140E in the western part of Ikutha town.
The results indicate that iron mineralization in Mutomo-Ikutha has been controlled by tectonics, especially in the shear zone on the western part of the area. Chemical analysis shows that this deposit is of magnetite variety, having between 35% - 96% Fe2O3, 2% - 19% P2O5 and 0.1% - 5% TiO2 and resembling the Apatite-Iron ores of Kiruna type. Magnetic survey has shown that Iron ore in Mutomo-Ikutha occurs from the surface to 160 meters below the surface in form of veins, dikes, sills, and pod form extending more than 10 kilometers from north- western part of the area towards the south. The iron ore deposit is structurally controlled by shear zone and hosted in
No. | SiO2 | Al2O3 | CaO | MgO | Na2O | K2O | TiO2 | MnO | Fe3O4 | P2O5 | Total | Mineral |
---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | 2.91 | 0.60 | 8.40 | 0.24 | 0.17 | 0.030 | 0.05 | 0.400 | 81.30 | 5.70 | 99.80 | Magnetite + Apt |
2 | 3.83 | 0.76 | 3.77 | 0.20 | 0.14 | 0.030 | 0.30 | 0.400 | 86.10 | 4.10 | 99.63 | Magnetite + Apt |
3 | 6.97 | 1.47 | 0.99 | 0.19 | 0.17 | 0.030 | 0.18 | 0.400 | 88.30 | 1.00 | 99.70 | Magnetite |
4 | 5.05 | 0.33 | 0.25 | 0.30 | 0.12 | 0.030 | 20.70 | 0.600 | 71.00 | ND | 98.38 | Magnetite + Sphene |
5 | 4.78 | 0.11 | 0.60 | 0.47 | 0.11 | 0.03 | 21.70 | 0.60 | 70.70 | 0.50 | 99.60 | Magnetite + Sphene |
hornblende gneiss. Shearing along the western part of the area, especially within Tiva, gneisses creates room for iron ore deposition. Iron vein trending in the North-South direction on the western part of the area occurs within the shear zone.
Aaron K.Waswa,Christopher M.Nyamai,EliudMathu,Daniel W.Ichang’i, (2015) Application of Magnetic Survey in the Investigation of Iron Ore Deposits and Shear Zone Delineation: Case Study of Mutomo-Ikutha Area, SE Kenya. International Journal of Geosciences,06,729-740. doi: 10.4236/ijg.2015.67059