The current study aimed to investigate the effects of the temperature, light, and water stress on Piptadenia stipulacea seed germination. It assessed germination percentage, speed and average germination time, root and stem length as well as the dry weight of seedlings subjected to the constant temperatures of 20°C, 25°C and 30°C and alternating temperatures from 20°C to 30°C. A 12-hour photoperiod was established in addition to the following light conditions: white, darkness, red and far red. The experimental design was completely randomized and four replicates of 25 seeds were performed for each treatment. Regarding water stress, seeds were subjected to osmotic potentials of 0, -0.2, -0.4, -0.6, -0.8, -1.0, and -1.2 MPa, at 30°C and 12 h light/12 h darkness photoperiods. After they were mixed, 100 seeds were randomly selected for biometric measurement and they were found to be uneven with respect to size and weight. P. stipulacea seeds germinated under all tested temperature and light conditions. Germination under water stress occurred up to -0.8 MPa. The conclusion is that there was no germination from -1.0 MPa. The seeds are light-indifferent and germinate at the constant temperatures of 20°C, 25°C and 30°C and alternating temperatures from 20°C to 30°C.
Piptadenia stipulacea (Benth.) Ducke, Fabaceae, is found in “Não me deixes” Farm, a Natural Heritage Private Reserve located in Quixadá County, Ceará State, Brazil, within an area covered by Caatinga vegetation. Its seeds show integumentary dormancy [
Once dormancy is broken, the morphologically developed seed requires environmental stimuli such as tempe- rature, light (both quantity and quality) and, above all, water availability for the germination and establishment of new seedlings in a safe environment. In addition to such stimuli, seeds size and vigor are features that must be taken into consideration when one studies native species. Seeds biometry provides important subsidies to differ- rentiate species from the same genus and it gives information about seeds’ health and conservation status [
Investigating light and temperature influence on the seed germination process is the basis for understanding native species ecological and physiological behavior. According to Bewley et al. [
In addition to the appropriate temperature and light conditions, water availability is another important abiotic factor responsible for the plant species germination success. Water is responsible for activating different metabolic processes that lead to seed germination, and each species requires a minimum amount of available water in order to germinate [
Knowing how abiotic factors such as light, temperature and water affect the P. stipulacea seed germination process may contribute to its seeds rational use and to a more efficient seedling production for planting. Knowing seeds biometry allows producers to select those with good size and devoid of physical damage. The current study aimed to investigate the effects of temperature, light and water stress on P. stipulacea seed germination.
P. stipulacea fruits were manually collected from five selected trees in September 2013. The harvesting took place in a Caatinga vegetation area in the Natural Heritage Private Reserve “Não me deixes” Farm (4˚49'34''S, 38˚58'9''W and 210 m above current sea level), in Quixadá County, Ceará State, Brazil.
The fruits were dried in an oven (45˚C/3days) and processed for seed extraction. After processing, seeds were separated from impurities (part of fruits, leaves, petioles) and from other seeds which were damaged by insects or that were broken. They were then placed in plastic containers and stored (for two months) in a cold chamber at an average temperature of 12˚C and relative humidity of 55% until the beginning of the experiments.
The experiments were conducted in the Seed Analysis Laboratory (LAS―Laboratório de Análise de Semen- tes) from the Plant Science Department, at Federal University of Ceará (UFC). Botanical material containing P. stipulacea leaves and fruits was collected for specimen preparation and was deposited at Prisco Bezerra Herbarium―EAC, Federal University of Ceará, under protocol number 054121 (EAC).
After they were mixed, 100 seeds were randomly selected for individual measurement. Biometric featuring was performed by means of digital caliper (0.01 mm) through which the following variables were measured: length, width, thickness and weight (in precision scale). The length was measured from the base to the apex and width and thickness were measured on seeds midline. Data were subjected to descriptive statistics in Excel application in order to calculate arithmetic mean, standard deviation, standard error, coefficient of variation and confidence interval for each biometric feature.
P. stipulacea thousand seed weight was calculated in accordance with the Rules for Seed Analysis recommendations [
The dormant seeds [
The treated seeds were sown on two sheets of germitest filter paper arranged in 9.50 cm diameter Petri dishes. The Petri dishes with the sheets of germitest filter paper were previously autoclaved at 120˚C for 20 minutes. The substrate was moistened with distilled water in the ratio of two and a half times the weight of the paper [
Temperature and light effects were checked by using the completely randomized experimental design. Treatments were distributed in 4 × 4 factorial arrangement, and subjected to constant temperatures of 20˚C, 25˚C and 30˚C and alternating temperatures from 20˚C to 30˚C, under a 12-hour photoperiod and the following light conditions: white, darkness, red, and far red, with four replicates of 25 seeds. During alternating temperatures, the light period corresponded to the higher temperature. As for the white light condition, the Petri dishes were placed in transparent plastic bags to prevent water loss. In the absence of light (darkness), seeds were individually wrapped in aluminum foil and placed inside black plastic bags. For the simulation of red light (660 nm) and far red light (730 nm), the method described by Almeida and Mundstock [
The Petri dishes were placed in a BOD (Biological Oxygen Demand) germination chambers regulated in their constant and alternating temperature regimes. The germinated seeds were daily recorded for 10 days, and the evaluation criterium was the presence of a radicle of at least 2 mm. Security green light was used to count seeds subjected to darkness, red and far red light. During this period, the Petri dishes were carefully remoistened with distilled water when necessary. Finally, the following variables were evaluated:
a) Germination percentage, % G = (N/A) × 100, where: N = number of germinated seeds and A = total number of sown seeds.
b) Germination speed index, according to Maguire [
c) Mean germination time, according to Ranal and Santana [
d) Length: the length of seedlings root and shoot was measured separately, discarding the cotyledons, with the help of a millimeter ruler.
e) Dry weight: obtained from material placed in paper bags duly identified and dried in the greenhouse at 80˚C, with forced air circulation for 24 h. After this period, the seedlings were weighted in precision scale and the results were expressed as g/seedling.
The water restriction simulation on P. stipulacea germination under laboratory conditions was tested by means of polyethylene glycol solutions (PEG 6000), which satisfactorily simulates low water potentials. PEG is chemically inert and does not show toxicity to the seeds [
The seeds were placed in Petri dishes (9.50 cm diameter) and the germitest paper substrate was moistened with distilled water (witness) and PEG 6000 solution in different concentrations. The used polyethylene glycol concentrations (PEG 6000) were −0.2; −0.4; −0.6; −0.8; −1.0 and −1.2 MPa water potential, obtained for the constant temperature of 30˚C, according to Villela et al. [
The Petri dishes were kept in germination chamber (BOD) under constant temperature of 30˚C for a 12-hour photoperiod. The germitest paper substrate and PEG solutions were replaced every 48 hours aiming at maintaining the experiment initial conditions. The counts of germinated seed were carried out daily for 14 days, and the germination percentage (% G) was determined at the end of the experiment.
All the dependent variables were analyzed with respect to normality by using Kolgomorov-Smirnov test, and the homogeneity of variances was analyzed by using the Levene test. After the two criteria were met, the data were subjected to ANOVA, and averages were compared by Tukey’s test at 5% significance level. When they were not met, the data were subjected to non-parametric statistics by the Kruskal-Wallis test and evaluated by non- parametric multiple comparisons at 5% significance level [
P. stipulacea seeds are uneven regarding size, and show variation in length (6.71 to 8.67 mm), width (4.78 to 6.32 mm) and thickness (1.88 to 3.07 mm). The unit seed weight ranged from 42.9 to 80.28 mg. Seeds descriptive statistics is presented in table 1. The thousand seed weight was of 44.134 g, which allows inferring that a kilogram of P. stipulacea seeds can contain 22,658 seeds.
Temperature and light quality (white, darkness, red and far red) evaluations for P. stipulacea seeds germination percentage (% G) showed similar means (H(3.15) = 32.96, p = 0.0048). The data presented in table 2 show that the species germinated regardless the presence and absence of light, both at the constant temperatures of 20˚C, 25˚C and 30˚C and at the alternating temperature from 20˚C to 30˚C.
The ANOVA result for P. stipulacea seed germination showed that abiotic factors such as temperature, light and their interactions exerted significant effects for all variables under analysis, with the exception of the light for seedling dry weight (
The interaction between light and temperature influenced the germination speed index (GSI). It is possible to see that the highest germination speed index (10.52) occurred at 30˚C under far red light condition, and the lowest one (4.3) was observed under darkness condition at 20˚C (
There was a significant statistical effect of temperature and light treatments on P. stipulacea seeds Mean Germination Time (MGT). The lower MGT was obtained at 30˚C under red and far red light conditions. The
Variable | Mean | Standard deviation | Standard error | Coefficient of variation | CI 95% |
---|---|---|---|---|---|
Length (mm) | 7.7 | 0.51 | 0.05 | 6.65 | 7.69 ± 0.09 |
Width (mm) | 5.44 | 0.35 | 0.04 | 6.4 | 5.44 ± 0.06 |
Thickness (mm) | 2.27 | 0.20 | 0.02 | 8.95 | 2.27 ± 0.03 |
Weight (mg) | 63.48 | 8.34 | 0.83 | 13.14 | 63.48 ± 1.63 |
Temperature (˚C) | Germination percentage (G%) | |||
---|---|---|---|---|
Light | ||||
White | Darkness | Red | Far red | |
20 | 93 ± 5.03 aA | 86 ± 2.30 aA | 87 ± 6.83 aA | 87 ± 3.82 aA |
25 | 91 ± 3.82 aA | 88 ± 0.00 aA | 93 ± 2.00 aA | 93 ± 2.00 aA |
30 | 95 ± 3.82 aA | 93 ± 3.82 aA | 95 ± 2.00 aA | 97 ± 2.00 aA |
20/30 | 93 ± 3.82 aA | 95 ± 3.82aA | 97 ± 3.82 aA | 95 ± 5.03 aA |
Means followed by the same letter do not significantly differ from each other by nonparametric multiple comparisons at 5% probability.
Variance factor | F values | |||||
---|---|---|---|---|---|---|
Df | GVI | MGT | Shoot | Root | Dry weight | |
Temperature (T) | 3 | 63.97** | 16.09** | 23.79** | 0.52** | 0.0247** |
Light (L) | 3 | 3.71** | 0.58** | 18.54** | 1.17** | 0.0002 ns |
T × L | 9 | 2.25** | 0.21* | 0.93** | 0.29** | 0.0031* |
Residual | 48 | 0.58** | 0.10** | 0.29** | 0.09** | 0.0014** |
CV (%) | - | 10.57 | 8.95 | 11.26 | 15.97 | 17.04 |
**Significant at 1% probability level by F test; *Significant at 5% probability level by F test and ns: non-significant.
Temperature (˚C) | Germination Speed Index (GSI) | |||
---|---|---|---|---|
Light | ||||
White | Darkness | Red | Far red | |
20 | 4.76 ± 0.41 aA | 4.3 ± 0.30 aA | 4.74 ± 0.39 aA | 4.36 ± 0.31 aA |
25 | 6.89 ± 0.39 aB | 7.35 ± 1.37 aB | 7.71 ± 0.50 aB | 6.72 ± 0.34 aB |
30 | 7.93 ± 1.02 aB | 8.35 ± 0.68 aB | 10.25 ± 1.20 bC | 10.52 ± 0.51 bD |
20/30 | 6.89 ± 0.50 aB | 8.68 ± 1.60 bB | 8.17 ± 0.24 abB | 8.47 ± 0.67 bC |
Means followed by the same lowercase (lines) and uppercase (columns) letters do not significantly differ from each other by the Tukey’s test at 5% probability.
largest MGT was obtained at 20˚C in all evaluated light conditions (
The white light was more efficient in stimulating P. stipulacea seedlings’ root growth. The highest root length mean occurred at 20˚C (2.55 cm) under white light condition, although the other temperatures evaluated under the same light condition were statistically similar (
The lowest mean shoot length occurred at 20˚C in the four evaluated light conditions. There was the highest mean shoot length in all treatments (
The dry mass was lower at 20˚C regarding the four evaluated light conditions. There were small variations in the means obtained from the other treatments (
P. stipulacea germination percentage was significantly influenced by different treatments with polyethylene glycol (PEG 6000), (F = 331.29, p < 0.001). Seed germination was not affected by PEG 6000 concentrations up to −0.4 MPa. However, it was reduced at the concentrations of −0.6 and −0.8 MPa. There was no seed germination at −1.0 and −1.2 MPa (
Seeds size and weight depended on the year they were produced and on where they were dispersed. Such features can vary in the same individual and within the same functional group [
P. stipulacea seeds germinated under all tested temperature and light conditions. Such fact may reveal the
Temperature (˚C) | Mean Germination Time (MGT) | |||
---|---|---|---|---|
Light | ||||
White | Darkness | Red | Far red | |
20 | 5.05 ± 0.42 aB | 5.15 ± 0.20 aB | 4.79 ± 0.07 aC | 5.13 ± 0.22 aC |
25 | 3.45 ± 0.12 aA | 3.27 ± 0.60 aA | 3.15 ± 0.20 aB | 3.68 ± 0.14 aB |
30 | 3.20 ± 0.58 bA | 2.96 ± 0.15 abA | 2.45 ± 0.27 aA | 2.43 ± 0.15 aA |
20/30 | 3.54 ± 0.33 aA | 2.98 ± 0.58 aA | 3.00 ± 0.07 aAB | 2.98 ± 0.19 aA |
Means followed by the same lowercase (lines) and uppercase (columns) letters do not significantly differ from each other by the Tukey test at 5% probability.
Temperature (˚C) | Root length (cm) | |||
---|---|---|---|---|
Light | ||||
White | Darkness | Red | Far red | |
20 | 2.55 ± 0.27 bA | 1.61 ± 0.34 aAB | 2.00 ± 0.38 abAB | 1.69 ± 0.19 aAB |
25 | 2.21 ± 0.33 bA | 1.58 ± 0.16 aAB | 1.91 ± 0.11 abAB | 2.26 ± 0.30 bB |
30 | 2.10 ± 0.53 bA | 1.61 ± 0.33 aA | 1.46 ± 0.35 aA | 1.64 ± 0.21 abA |
20/30 | 2.27 ± 0.29 bA | 2.08 ± 0.14 abB | 2.27± 0.24 bB | 1.53 ± 0.35 aA |
Means followed by the same lowercase (lines) and uppercase (columns) letters do not significantly differ from each other by the Tukey test at 5% probability.
Temperature (˚C) | Shoot length (cm) | |||
---|---|---|---|---|
Light | ||||
White | Darkness | Red | Far red | |
20 | 2.17 ± 0.29 bB | 3.56 ± 0.41 aB | 3.05 ± 0.44 aC | 3.36 ± 0.52 aB |
25 | 4.36 ± 0.29 bA | 6.37 ± 1.01 aA | 4.37 ± 1.10 bB | 6.31 ± 0.32 aA |
30 | 4.07 ± 0.13 cA | 7.23 ± 0.90 aA | 5.48 ± 0.34 bA | 6.24 ± 0.38 abA |
20/30 | 3.64 ± 0.16 cA | 6.89 ± 0.36 aA | 4.66 ± 0.23 bAB | 5.50 ± 0.49 bA |
Means followed by the same lowercase (lines) and uppercase (columns) letters do not significantly differ from each other by the Tukey test at 5% probability.
Temperature (˚C) | Dry mass | |||
---|---|---|---|---|
Light | ||||
White | Darkness | Red | Far red | |
20 | 0.16 ± 0.013 aA | 0.18 ± 0.02 aA | 0.17 ± 0.036 aA | 0.17 ± 0.027 aA |
25 | 0.25 ± 0.025 aB | 0.21 ± 0.035 aA | 0.21 ± 0.072 aAB | 0.27± 0.02 aB |
30 | 0.26 ± 0.036 aB | 0.24 ± 0.046 aAB | 0.27 ± 0.044 aB | 0.25 ± 0.027 aB |
20/30 | 0.22 ± 0.042 aAB | 0.29 ± 0.022 aB | 0.25± 0.043 aB | 0.22 ± 0.058 aAB |
Means followed by the same lowercase (lines) and uppercase (columns) letters do not significantly differ from each other by the Tukey test at 5% probability.
species ability to adapt itself to thermal fluctuations and natural light levels in the environment in which it is located. According to Guedes et al. [
which are common tree species in this region, germinate at the optimal temperatures of 20˚C and 30˚C, regardless the presence or absence of light [
Given the results shown in table 4, we can observe that the highest germination speed index occurred at 30˚C. There was a trend of increased germination speed index as the temperature increased. Marcos Filho [
The lowest mean germination time of P. stipulacea seeds was observed at 30˚C under red and far red light conditions. As this species occurs in Caatinga areas with average temperature of 30˚C, the seeds mean germination time is important for the satisfactory seedling establishment in the field. Another aspect to be considered is the fact that it is used in forest restoration and agroforestry systems. The light had little effect on germination and seedling development was not assessed. In this case, forest seedlings producers should provide appropriate shading in order to ensure rapid and uniform seed germination and subsequent seedling emergence in greenhouses.
In general, the root and shoot average length and dry weight recorded differences among the treatments in the presence of white light. In the laboratory, such light condition simulates the direct sunlight in the field, in which the root tends to grow since it is stimulated by high light intensity. A deep root system allows the most adapted species to occupy degraded areas or areas undergoing environmental restoration projects.
P. stipulacea seeds germination percentage was affected by PEG 6000 concentrations from 0 (control) to −0.8 MPa. The lack of germination in osmotic potentials −1.0 and −1.2 MPa can be attributed to the very unfavorable water conditions. Under such conditions, seeds avoid germinating as a survival strategy. This way, they can ensure further seedlings development [
Seeds from Northeastern semi-arid species show decreased germination when subjected to water stress due to the increased salt concentration up to the critical point, which is typical of each species. Silva et al. [
P. stipulacea seeds were found to be uneven with respect to size and weight. P. stipulacea seeds germinated under water stress occurred up to −0.8 MPa and seeds are light-indifferent and germinate at the constant temperatures of 20˚C, 25˚C and 30˚C and alternating temperatures from 20˚C to 30˚C.