Single-carrier frequency-division multiple access (SC-FDMA) and orthogonal frequency division multiple access (OFDMA) systems are new orthogonal multiple access systems. They have been adopted in the 3GPP long term evolution (3GPP-LTE). In these systems, there are only two types of subcarrier mapping schemes which are the interleaved and the localized. So, introducing a new subcarrier mapping scheme is an important issue, which is the main objective of this paper. In this paper, a hybrid subcarrier mapping scheme is proposed and examined for the SC-FDMA system. Monte Carlo simulations are performed to compare the performance of the proposed scheme with that of the interleaved and the localized schemes. It is shown that a hybrid scheme provides better performance than that of the localized and the same performance as that of the interleaved scheme and increased robustness to carrier frequency offset (CFO) at the expense of increased envelope fluctuations.
Recently, orthogonal FDMA multiple access systems such as the SC-FDMA and the OFDMA are attracting much attention for the recent physical layer protocols in highspeed wireless networks due to theirs advantages over the conventional FDMA multiple access system. These multiple access systems have been employed for the physical-layer protocol in 3GPP-LTE [
In the literature, SC-FDMA has been studied with different basis functions [2,3]. However, only two subcarrier mapping schemes are considered: the interleaved subcarrier mapping scheme and the localized subcarrier mapping scheme [
In this paper, an efficient subcarrier mapping method, named Hybrid FDMA (HFDMA), is proposed which not only holds the same performance as the IFDMA scheme, but also overcomes its shortcomings. It also provides better performance than that of the LFDMA.
This paper is organized as follows: In the next section (Section 2), we will briefly introduce the SC-FDMA system model with the proposed scheme. In Section 3, the details of the proposed scheme will be explained. In Section 4, simulation results are given to verify the performance of the proposed scheme. Finally, conclusions are drawn in Section 5.
The block diagram of the SC-FDMA system with the proposed scheme is shown in
data, as in the OFDMA system. However, the SC-FDMA system transmits the subcarriers sequentially, rather than in parallel. This approach has the advantage of enabling a low PAPR, which is important to increase cell coverage and to prolong the battery lifetime of mobile terminals.
At the transmitter side, the encoded data is transformed into a multilevel sequence of complex numbers in one of several possible modulation formats. The resulting modulated symbols are grouped into blocks, each containing N symbols and the DFT is performed. The signal after the DFT can be expressed as follows:
where N is the input block size. represents the modulated data symbols. The outputs are then mapped using the hybrid mapping to orthogonal subcarriers. Then, the M-points IDFT are used to convert the output to a time domain complex signal sequence. M = QN is the output block size. Q is the maximum number of users that can transmit, simultaneously. Notice that the remaining M − N subcarriers may be used by the other users communicating in the cell, thus a promising multiuser access is achieved. The resulting signal after the IDFT can be given as follows:
where represents the frequency domain samples after the subcarrier mapping scheme. Before transmission through the wireless channel, a cyclic prefix (CP) is appended in front of each block to provide a guard time preventing IBI in the multipath channel. After adding a CP of length NC to the resulting signal, the signal is transmitted through the wireless channel.
In matrix notation, the transmitted signal of the uth user can be formulated as follows:
where is an N × 1 vector containing the modulated symbols of the user. is an N × N DFT matrix. is an M × M IDFT matrix. is an M × N matrix describing the subcarriers mapping of the uth user. is an matrix, which adds a CP of length NC. The entries of for both the LFDMA and the IFDMA systems will be given in Section (3). can be represented as follows:
where
At the receiver, the CP is removed from the received signal and the received signal can be written as follows:
where is an M × M circulant matrix describing the multipath channel between the uth user and the base station. is an M × 1 vector representing the block of the transmitted symbols of the uth user before adding the CP. n is an M × 1 vector describing the noise. n contains independent identically-distributed (i.i.d) zero-mean additive white Gaussian noise (AWGN).
The circulant matrix can be efficiently diagonalized by the DFT and the IDFT. It can be expressed as follows:
where is an M × M diagonal matrix containing the fast Fourier transform of the circulant sequence of.
The generic M-point DFT matrix has entries
, and its inverse is.
Now, substituting (7) in (6) and apply the M-point DFT, we get
where N is the frequency domain vector of the noise.
After that, the frequency domain equalization (FDE), the hybrid subcarrier demapping, and the M-point IDFT operations are performed to provide the estimate of the modulated symbols as follows:
where is an N × 1 vector containing the estimate of the modulated symbols. is an M × M matrix representing the FDE of the uth user. is an N × M subcarriers demapping matrix of the uth user. is given by taking the transport of, that is,. can be derived according to the minimum mean square error criterion as follow:
Finally, the demodulation and decoding processes are performed.
DFT output of the data symbols is mapped to a subset of subcarriers, a process called subcarrier mapping. The subcarrier mapping assigns DFT output complex values as the amplitudes of some of the selected subcarriers. Subcarrier mapping can be classified into two types: localized mapping and distributed mapping. In localized mapping, the DFT outputs are mapped to a subset of consecutive sub-carriers thereby confining them to only a fraction of the system bandwidth. In distributed mapping, the DFT outputs of the input data are assigned to subcarriers over the entire bandwidth non-continuously, resulting in zero amplitude for the remaining subcarriers. A special case of distributed SC-FDMA is called interleaved SC-FDMA, where the occupied subcarriers are equally spaced over the entire bandwidth [
The proposed scheme is a hybrid scheme comprising the localized and the interleaved schemes. On the other hand, in the proposed scheme, the DFT outputs of the input data are first divided into subbands and each subband contains N1 symbols. These subbands are then assigned to subcarriers over the entire bandwidth. The number of subbands is. If the subcarrier mapping matrix of the uth user is denoted by, the entries of for both the localized and the interleaved schemes are formulated, respectively, as follows:
where the and matrices denote the N × N identity matrix, and the all-zero matrix, respectively. denotes the unit row vector, of length N, with all zero entries except at l. The entries of for the proposed HFDMA scheme is expressed as follows:
where
When the number of symbols in each subbands is equal to 1, i.e. N1 = 1, (13) is reduce to (12) and the hybrid scheme becomes similar to the interleaved scheme. However, when the number of symbols in each subbands is equal to the outputs of the DFT, i.e. N1 = N, (13) is reduce to (11) and the hybrid scheme becomes similar to the localized scheme. In the hybrid scheme, the number of symbols in each subbands must be chosen carefully in order to obtain better performance.
schemes. Note that N1 = 2 in
The hybrid mapping scheme have the advantages of both the localized and the interleaved schemes. The main advantages of the hybrid mapping scheme can be summarized as follows:
1) It is more robust with respect to frequency selective fading.
2) It offers additional frequency diversity gain similar to that in the interleaved scheme, since the information is spread across the entire system bandwidth.
3) It offers multi-user diversity in frequency selective channel conditions similar to that in the localized scheme.
4) It is more robust with respect to carrier frequency offset.
The main disadvantage of the hybrid mapping scheme is its high PAPR as compared to that of the localized and the interleaved schemes, but its PAPR is also lower than that of the OFDMA system.
The performance of the proposed scheme is tested with computer simulations. An uplink SC-FDMA system with 512 subcarriers is considered. In this system, there are four users, and 128 subcarriers are allocated to each user. The users employ QPSK mapping for their data symbols. The channel model used for simulations is the vehicular A model [
The impact of the number of symbols in each subband N1 on the bit error rate (BER) performance of the proposed scheme at different signal-to-noise ratio (SNR) values and QPSK modulation scheme is illustrated in
Figures 4 and 5 show the variation of the BER with the SNR at different modulation schemes for the IFDMA, the LFDMA, and the HFDMA systems, respectively. It is shown that the HFDMA system provides better performance than that of the LFDMA system and provides the same performance as that of the IFDMA system.
The complementary cumulative distribution function (CCDF) of the PAPR for the IFDMA, the LFDMA, the HFDMA, and the OFDMA systems are evaluated and shown in
The impact of the CFO on the performance of the HFDMA is studied and shown in
is explained in our paper in [