_{1}

^{*}

A new approach to the problem of cold denaturation is presented. It is based on solvent-induced effects operating on hydrophilic groups along the protein. These effects are stronger than the corresponding hydrophobic effects, and they operate on the hydrophilic groups which are plentiful than hydrophobic groups. It is shown that both heat and cold denaturation can be explained by these hydrophilic effects.

Understanding the Protein Folding Problem (PFP) has been one of the most challenging problems in molecular biology. An even more challenging problem is known as the cold-denaturation process [1-13].

In an excellent review article entitled “Cold Denaturation of Proteins”, Privalov makes the following comments [^{}

“…disruption of the native structure upon heating, the heat denaturation of protein, appear to be an obvious effect. By the same argument, a decrease of temperature should only induce processes leading to increasing order.”

Indeed for any process in which a molecule P converts from a state F having a lower energy and lower entropy to a state U having a higher energy and higher entropy, we should expect that as we increase the temperature the process will proceeds from F to U. When the temperature is lowered the reverse process from U to F is expected to occur. There is no mystery in this.

The mystery of protein folding upon decreasing the temperature is that the conversion from U to F occurs at a range of temperatures at which the protein should have attained the U, rather than the F state. Thus, the main challenge is to find the factors that cause the folding at relatively higher temperatures.

It is generally believed that water is the main factor that confers stability to the folded state (F) [

How exactly water molecules help in maintaining the stability of the folded state at temperatures which favor the unfolded state has been the essence of the mystery associated with protein folding.

In 1959, Kauzmann introduced the idea that the hydrophobic (HfO) effect is probably one of the major factors that confer stability to the native structure of the protein [

The dominance of the HfO effect in protein folding was challenged in the 1990s [16-18]. It was found that Kauzmann’s model for the HfO effect is not adequate in explaining the folding of proteins. Instead, a new and a rich repertoire of hydrophilic (HfI) effects were discovered. These HfI effects provided explanation for both the process of protein folding and protein-protein association. In effect, the discovery of the HfI effects has removed the mystery out of the protein folding phenomenon. This aspect of protein folding has been discussed in great detail elsewhere [15,19].

This article is devoted to the phenomenon of cold denaturation (CD) of proteins. As in the PFP, there are many factors that are operative in the process of CD. We shall examine some of these factors which, to the best of the author’s knowledge were never considered before.

The main problem of cold denaturation is the following. It is relatively easy to understand the process of denaturation as the temperature increases. This aspect of the problem is briefly discussed in Section 2. When we cool down some solutions of a denatured protein a spontaneous renaturation occurs. The mystery associated with this process is one part of the PFP, and will not be discussed here [

At sufficiently high temperature the entropy term will dominate. Since for folding is negative, the standard Gibbs energy of folding at high temperatures is positive, i.e. the U state is favored. When the temperature is lowered, there must be an energetic reason that makes negative and large enough to over compensate for the large positive. This is essentially the PFP, namely what makes the folded structure more stable at lower temperatures.

Accepting whatever explanation for the change in the sign of from positive to negative upon lowering the temperature, we expect that as we further lower the temperature, the value of will become smaller. Therefore, we should expect that will become even more negative as we lower the temperature. The fact that becomes positive at lower temperature is therefore more of a mystery than the folding of the protein at higher temperature range As in the case of protein folding, most theoretical approaches to CD have been based on the HfO effects [2-13]. It is well known that both HfO solvation and HfO interaction increase, in absolute magnitude, as the temperature increases. This is true for temperature range at which the native structure of proteins is stable. Therefore, it is not a surprise that all microscopic theories of CD have been based on the HfO effects. Unfortunately, the strength of the HfO effects was grossly exaggerated in protein folding as well as in CD [15,19]. To the best of the author’s knowledge no one has considered the HfI effects in connection with the phenomenon of CD.

In Sections 3 and 4 we show that both heat and cold denaturation can be explained by the HfI effects. The HfO effects do contribute in the right direction to the CD, but their strength is about an order of magnitude weaker than the corresponding HfI effects. Hence, we conclude that the HfI effects must play the major role in both heat and cold denaturation.

Consider the process of folding of a protein

We assume that all the accessible energy levels of the protein P can be split into two groups,

The internal partition function of the protein P in an ideal gas phase is split into two terms;

The canonical partition function of a system of N molecules in a volume V and temperature T is

where is the momentum partition function, , with k_{B} the Boltzmann constant and the T the absolute temperature.

The equilibrium constant for the reaction (2.1) can be easily obtained by maximizing the Helmholtz energy, or equivalently by finding the most probable distribution of molecules between the two states U and F [^{}

where and are the pseudo chemical potentials of F and U, respectively [

Note that since the momentum partition functions of U and F are equal to each other, the equilibrium constant depends only on the ratio of the internal partition functions of U and F.

In this system the standard Helmholtz energy, entropy and energy of the system are given by

where is the conditional probability of finding the molecule in state i, given that it is in the group of states F. A similar meaning applies to.

According to our assumptions is negative, i.e. the average energy level of F is lower than that of U. Also, is negative for this reaction. Therefore, as the temperature increases we must have

We find that as, , hence. A simple example is shown in

We see that as we increase the ratio, the transition from F to U become sharper and occur at lower temperatures. The reason is simple and well understood. At higher temperatures the molecule will favor the state of higher degeneracy. On the other hand, at very low temperatures the molecule will favor the state of lower energy. The reason for the transition from F to U in real protein is essentially the same as in the simple case discussed above.

We have seen that for any polymer having two macrostates; one having lower average energy and low degeneracy denoted F, and the second having higher average energy and higher degeneracy denoted U, we expect that as, the system will favor F, whereas as, the system will favor U.

Now suppose that the molecular parameters are such that at about room temperature, say. We find that. For instance, if the ratio of the degeneracies is, and the energy difference between the two states is of the order of we find that at nearly all the molecules will be in the U state (see right curve in

Now, we place the same polymer in water, and for simplicity we assume that the solution is very dilute with respect to the polymer. In this solution, if we find that the majority of the polymer molecules are now in the F state, then we must conclude that the equilibrium constant has changed, due to solvation effects. We write the equilibrium constant in the liquid state as [^{}

where is the solvation Gibbs energy of the species and is the solvent induced effect for the transition.

The relationship between the solvent-induced quantity and the solvation Gibbs energies is shown in

where is the mole fraction of the specific conformer i in an ideal gas phase.

As Privalov had noted [

For the reaction (2.1) we can formulate the Le Chatellier’s principle as follows. At equilibrium we have

From the total derivative of, along the equilibrium line, i.e. maintaining the condition 3.4, we have

where and are the number of moles of F and U at equilibrium, and. From (3.5) we get

or equivalently, since at equilibrium we have

The quantity must be positive at equilibrium [20-22].

At the temperature of heat denaturationand,. On the other hand at the temperature of Cold denaturation, and and

,. As Privalov had noted it is relatively easy to understand the heat denaturation. The more intriguing question is to understand why (as well as) change signs at lower temperatures.

The question that has concerned many biochemists was to identify the part of the solvent induced effect that is sufficiently large and negative, such that it can turn the standard Gibbs energy of the transition from large positive to large negative.

The answer to this question cannot be given without a detailed examination of all the contributions to the solvent induced effect. For a long time most people assumed, based on Kauzmann’s model for the HfO effect,

However, a detailed study of all the ingredients that contribute to reveals that the answer to the ques-

tion is far from trivial. First, it was found that Kauzmann’s model, i.e. the Gibbs energy of transferring of a HfO solute from water to an organic liquid does not feature in. The Gibbs energy of transferring a HfO group attached to the protein from being exposed to water in the U conformer into the interior of the protein was found to be one or even two orders of magnitudes smaller than the estimated values of the Gibbs energy changes based on Kauzmann’s model [

On the other hand, a host of solvent induced effects due to HfI groups were found to be much larger than the corresponding HfO effects [

Thus, when comparing a specific HfO effect with a specific HfI effect, one finds that the magnitude of the latter is much larger than the former. Moreover, in real proteins what determines the standard Gibbs energy of the reaction is the combined effects of all the HfO groups and all the HfI groups. If there are roughly 30% of HfO side chains and 50% HfI side chains (the other 20% are “neutral”), then a protein of M amino acids have about M/3 HfO groups, and about (M+M/3) HfI groups, the additional 2 M of HfI groups are the C=O and NH groups contributed by the backbone of the protein.

Therefore, even if each of the HfO effect had the same magnitude as the corresponding HfI effect, then we should expect that the combined effects of all the HfI groups will be larger than the combined effects of all the HfO groups. This conclusion is a fortiori true when each of the HfI effect is an order magnitude larger than the corresponding HfO effect. For more details see references [15,19]. We shall demonstrate this effect in a simple model in Section 5.

Having given a plausible argument, based on HfI effects, for the folding of a protein in spite of the multitude of conformations belonging to the unfolded form, answers one of the most challenging problems of protein folding [

If HfI interactions are the dominant factors that stabilize the 3D structure of the folded form, how can we explain the denaturation of the protein at lower temperatures.

Superficially, one would be tempted to embrace the HfO effect to explain the cold denaturation. It is known that the strength of the HfO effects, both solvation and pair wise interactions increase with temperature. Therefore, accepting the HfO effect as the dominant one in the folding of protein offers a plausible explanation of the cold denaturation. Namely, as we decrease the temperature, the HfO becomes weaker, hence the folded form becomes destabilized. This is the main argument given in all the theoretical approaches to the problem of CD.

Unfortunately, all the HfO effects are too weak to explain folding in the first place. Therefore, one cannot rely on the temperature dependence of the HfO to explain the unfolding of a protein at low temperatures.

A superficial argument based on HfI effect seems to lead to the conclusion that as we lower the temperature, the HfI effect will become stronger, and therefore causing further stability to the folded form. Indeed, this conclusion is true, had we only one type of HfI effect. In reality, there is a host of HfI effects, having different temperature dependence. Therefore, the answer to the question of why proteins unfold at a lower temperature is to be found in the difference in the rate of change of the various HfI effect with increasing the temperature. In the next section, we shall demonstrate this effect in a simple model. Here, we present the general argument.

First, note that one type of HfI effect operates mainly to stabilize the folded form. This is the direct intramolecular HBs between HfI groups. Others are pair wise, triple-wise, etc. HfI effects operate both on the folded and on the unfolded form. For simplicity let us assume that only one intramolecular HB is formed between two “arms” of two HfI groups (say between NH and C=O). The formation of such a HB contributes to about [^{}

i.e. we form one HB involving energy, and we lose the solvation Gibbs energy of two arms , which were solvated in the U form

The second HfI effect is between two HfI groups at a distance of about 4.5 Å, and at the correct orientation so that they can be bridged by a water molecule,

part of the Gibbs energy is about [

Thus, if both and decrease upon increasing the temperature we could not expect that these two effects will cause both a stabilization and a destabilization of the 3D structure. However, from a simple model discussed in the next section, we find that these two effects have different temperature dependence,

Thus, the fact that different HfI effect operates on different patterns of HfI groups, and these have different temperature dependence can explain both the heat and the cold denaturation. This is demonstrated in the next section.

We construct a “minimal” model for demonstrating both phenomena of heat and cold denaturation. This is a highly simplified model but it has enough real features, so as to show both transitions from U to F, then from F to U upon cooling the system.

In

1) Desolvation of a HfO group in the U state.

2) Van der Waals interaction between the HfO groups and its surrounding in the F state (dashed lines in

3) Desolvation of a HfI group in the U state.

4) An intramolecular HBing of two arms or two HfI groups.

5) Pairwise HfO interaction (double dashed lines).

6) Pairwise HfI interaction (arrows pointing towards W).

A more complete inventory of all solvent-induced effect is discussed in reference 15.

The parameters we used for the following calculations are as follows:

We take the HB energy as. Each van der Waals interaction contributes about −0.5 kcal∙mol. These two energies are presumed temperature independent. These are the only energies that contribute to the internal partition function of F.

For the solvation Gibbs energy of a HfO group we take the value of the conditional solvation Gibbs energy of methane next to a hydrocarbon [15,22] which is about 0.35 kcal/mol at room temperature.

From the experimental date available, we take the temperature dependence of the HfO solvation to be

Later we shall vary the values of these solvation Gibbs energies.

For the pairwise HfO interaction and its temperature dependence we take the values [^{}

For the solvation Gibbs energy of one arm of a HfI group at room temperature we take the value of about −2.25 kcal/mol [

In (5.3) is the probability that a water molecule will be found in the right position and orientation to form a HB with the arm. From the experimental values of and the choice of we can get the temperature dependence of the probability.

These values are also used for the calculations of the pairwise HfI interactions between two arms [

For the following calculations we assume that the segment of the protein has three HfO groups and 12 HfI groups. In real proteins the relative numbers of HfI/HfO groups is even larger than 4:1. We also assume that in the F form there are two intramolecular HBs, and three van der Waals interactions. We shall later change the values of the various interactions in order to examine the influence of each of these on the heat and cold denaturation.

The internal partition function for this system in an ideal gas phase is

where

In the ideal phase we assume that the lower energy level is non-degenerated, and N_{c} is the degeneracy of the U form. Here, we choose N_{c} = 10^{12}.

The equilibrium constant in the ideal gas phase is

and the mole fraction of the folded form is

_{F} as a function of T, for an ideal gas phase. As expected we see that the standard Gibbs energy in monotonically increasing function of T. We also see “folding” at temperatures of about.

We next introduced the solvent. The equilibrium constant is changed according to Equation (3.1). In this particular calculation we have

(5.8)

In the F form we have eight solvation Gibbs energies of the HfI arms and eight pairwise HfI interactions. In the F form we have 12 solvation Gibbs energies of the HfI arms, 3 solvation Gibbs energies of the HfO groups, one pairwise HfO interaction and two pairwise HfI interactions.

This particular choice was chosen for illustration of both the folding and the cold denaturation. In reality, different proteins will have different numbers of HfO and HfI groups, as well as different numbers of interactions. The following calculation is for a “typical” protein. Of course, one can multiply all these numbers by M for the whole protein and increase the degeneracy of the U form accordingly.

and the Gibbs energy change

where R is the gas constant.

In

In

its estimated value, we get folding at almost the same temperature as in the ideal gas phase, but there is no range of temperatures at which the F form is stable (i.e.).

In

the heat capacity change in agreement with the experimental findings [

The problem of cold denaturation (CD) is not a lesser mystery than the heat denaturation. As in the case of the protein folding problem, the search for a solution to the problem of CD has been derailed mainly because of the adherence to the myth that the HfO effects are the most important effect in protein folding [19,22].

In the highly simplified model described in section 4 we have included both HfO and HfI effects. We have the desolvation of HfO groups upon being transferred into the interior of the protein. We have pairwise HfO interaction arising from the correlation between the (conditional) solvation of the two HfO groups. We also have pairwise HfI interaction, and an intramolecular HB.

An analysis of the contribution of the various effects clearly shows that the HfI effects are the more important ones in the process of CD. One must realize that different HfI effect operates on different patterns of HfI groups. Therefore, the magnitude of the contribution of each type

(a)

CHANGING HYDROPHOBIC EFFECTS

of HfI effect would depend not only on the particular sequence of amino acids, but also on the particular conformation of the protein.

In real proteins there are many more factors that contribute to the Gibbs energy of the process of folding. There are pair-wise, triple-wise, etc. of the HfO effects between different HfO groups, and there are many HfI effects between different HfI groups. Thus, for a protein of M amino acids we might need to consider 20 different kinds of solvations, about 20^{2} kinds of different pairwise correlations, and more triplets and quadruplets correlations. Clearly, it is not simple to make any general statement about the main factors that determines either the folding or the unfolding of any specific protein. All we can say at the moment is that each type of HfI effect is larger than the corresponding HfO effect. Considering that a protein of M amino acids might have about M/3HfO groups, and more than 2M + M/3HfI groups, we should conclude that the combined HfI effects must be more important than the combined effects of all the HfO groups.

For the particular cases computed in Section 5 we can conclude that the explanation of both heat and cold de-

naturation is as follows: At high temperatures the dominating interaction is (

Having said this we might speculate on which of the HfI effects might be more important or most important in a real protein. The answer to this question is, of course sequence dependent. There are sequences for which intramoleular HB are the more important, yet there might be other sequences for which the pairwise or triplewise correlations might be more important.

Therefore, any general statement on which kind of HfI effects are the dominant ones for all proteins is at present unwarranted and perhaps an even irresponsible statement. This is a fortiori true of statements claiming that the HfO effects are the dominant ones in either protein folding or unfolding.