The kinetics of the formation of 1:1 complex of chromium(III) with ethylenediaminetetra-3-propinate (EDTP) was followed spectrophotometrically at lmax = 557 nm. The reaction was found to be first order in chromium(III) and was accelerated by EDTP. Increasing the pH from 3.3 to 4.7 accelerated the reaction rate, the reaction rate was retarded by increasing ionic strength and dielectric constant of the reaction medium. A mechanism was suggested to account for the results obtained which involves ion pair formation between the various species of the reactants. Values of the activation parameters obtained indicate an associative mechanism.
Synthetic chelating agents are used in many industrial applications because of their capability to bind and mask metal ions (such as Cr(III), Co(III), Fe(III)). Amongst these, ethylenediaminetetra-3-propinate is a synthetic organic metal chelating agent whose metal binding properties are exploited in a wide range of applications. These include detergent, food, pharmaceutical, cosmetic, metal finishing, photographic, textile and paper industries [1-3]. It is also used as a component in decontamination formulation of nuclear reactors and in nuclear waste processing [4,5].
Although the experimental system and reaction studied here is very simple in nature, elucidation of the mechanism in this model system has implications for a variety of more complex homogeneous and heterogeneous phenomena involving metal-organic complexes (e.g., metal ion transport, bioavailability, and toxicity).
In this study, the reaction of chromium(III) and ethylenediaminetetra-3-propinate in weak acid solution is investigated. Factors affecting the rate of reaction were the goal of this study.
All chemicals were of pure grade and were used without further purification. All solutions were prepared using bidistilled water. The ethylenediaminetetra-3-propinate was prepared using a previously described procedure [
The absorbance measurements were performed using thermostatted 292 Cecil spectrophotometer and pH measurements were conducted with Griffin pH meter fitted with glass-calomel electrode standardized by potassium hydrogen phthalate.
Kinetic experiments were conducted by mixing thermostatted solutions of chromium(III) and the ethylenediaminetetra-3-propinate and adjusting hydrogen ion concentration to the required value with potassium hydroxide or perchloric acid. Ionic strength was adjusted by sodium perchlorate solution. The solution was then introduced into the reaction vessel, which was previously thermostatted to the desired temperature and the reaction was followed spectrophotometrically at lmax = 557 nm for the complex formed. The reaction rate was followed under pseudo first order conditions where at least ten fold excess of the ligand concentration over the reactant chromium(III) concentration was always ensured. Values of the observed first order rate constant, kobs, were determined graphically for each run by plotting log (A¥-At) versus time, t, where A denotes the measured absorbance and the subscripts refer to time of reaction. The absorbance (A¥) was obtained directly after ensuring completion of the reaction. First order plots were linear for more than 85% of the reaction progress.
The reaction was found to be first order in chromium(III), the observed first order rate constants, kobs, did not vary with chromium(III) concentration, (
The effect of varying ethylenediaminetetra-3-propinate concentration, on the rate of reaction was also studied at different pH values (
Increasing the ionic strength, I, of the reaction medium from 0.6 to 1.5 mol∙dm−3 (adjusted by sodium perchlorate) the reaction rate (
The effect of the dielectric constant on the rate of reaction was studied using different ratios of ethanol-water mixtures. The values of the observed first order rate con-
stant, kobs increased with decreasing the dielectric constant of the reaction medium, ε, (
The effect of pH on the rate of reaction was studied in the range from 3.0 to 4.7 at various temperatures, (
The dependence of kobs on hydrogen ion concentration can be explained by in following equilibriums between the various species of each reactant which are present in the reaction medium [13,14].
The pentaaquahydroxochromium(III) species is more
reactive than the hexaaquachromium(III) due to the presence of OH− which causes an increase of water labilities due to its π-bonding ability [15-22].
The results obtained can be explained by the following mechanism for the interaction between the predominant species of chromium(III) with the predominant species of EDTP in the pH range under investigation
where IP1-IP4 are the hexaaquo and pentaaquohydroxy ion pair complexes of chromium(III) and EDTP.
The rate of exchange of the first ligand molecule, in the inner coordination sphere of the metal center is slow and therefore the rate determining Equations (7)-(10) [19-21]. As soon as one carboxyl group of the ligand enters into the inner sphere, the electron density on the chromium center increases owing to the inductive effect and as results the remaining ligands are labilized easily and its substitution is rapid. From the previous mechanism, the first order rate constant is derived as
by inversing Equation (11) we get equation
and a plot of 1/kobs versus 1/[EDTP] gave s straight line with slopes
and intercepts, I
and
The values of the ion pair formation constants, KIP and the rate constants of the rate determining steps, k, were calculating by plotting 1/kobs versus 1/[EDTP] at different pH, (
The effect of temperature on the rate reaction was also studied at different hydrogen ion concentrations (
It is well known that substitution reactions of hexaaquachromium(III) with a variety of ligands proceed by associative [12,20-22] and dissociative [23,24] mechanisms. Swaddle [25,26] and Lincoln [
and EDTP (this work).
In the Present study, the kinetics of the reaction between chromium(III) and EDTP in weak acid aqueous solutions was investigated. The reaction was found to be first order in chromium(III). The reaction rate accelerated with increasing the EDTP concentration, pH, temperature, decreasing ionic strength and dielectric constant of the reaction medium. An associative mechanism was suggested to account for the results obtained