An exact solution has been obtained for the release kinetics of a solute from a cylindrical non-erodible polymeric matrix into a finite external volume when the initial solute loading is greater than the solubility limit in the matrix. The moving boundary solution is derived based on the combination of variable method. The formulas of the moving boundary and the fractional solute release are given. The moving boundary and the fractional solute release profiles have been calculated at various solute loading levels and different external volumes. The obtained results show that as the external fluid volume increases, the fractional release at any time and the maximum fractional release increase. In addition, for a given external volume, as initial drug loading increases, the fractional release at any time decreases.
In recent years, the drug delivery field has experienced an exponential growth of interest in the role played by the carrier’s geometry (i.e., shape and size) in its functions—drug loading and release, stability, toxicity and, ultimately, delivery performance. Research in the area of controlled drug delivery systems has become increasingly important due to their advantages in safety and efficacy. The purpose of these systems is to maintain desired drug concentration in the blood or in the tissue as long as possible.
Pharmaceutical controlled release systems, generally constructed from polymers, are defined as the systems which delivers a drug at a predetermined and constant rate for a specified period of time. Such systems exist in many forms, including injectable microspheres, specially designed tablets, implants and transdermal patches. Diffusion, degradation and dissolution are the most important mechanisms that control the drug release from these controlled release systems. Among these mechanisms, diffusion is the most important mechanism used to control the drug release from drug delivery systems [
Diffusional release of the drug is normally governed by Fick’s first and second laws [
Lee [
Wu and Zhou [9,10] developed a numerical solution for a finite external medium system with an additional diffusion boundary layer incorporated on the surface of the matrix. Again in 2005, they investigated dispersed drug release from two dimensional matrix tablets [
In the present study, the exact moving boundary solution for the release kinetics of a dispersed solute from a polymeric matrix of cylindrical geometry into a finite external volume is developed. The formulas of the moving boundary and the fractional solute release are given. Predicted fractional release profiles in cylindrical geometry are presented for various solute loading levels and different external volumes.
The mathematical model for the diffusional release of a dispersed solute from a polymeric matrix with cylindrical geometry into finite volume has been considered with the following assumptions: 1) the diffusion coefficient is constant; 2) the system is cylindrical in shape with sealed ends so that the solute release from radius direction; 3) solute diffusion is assumed to be the rate controlling step rather than polymer swelling or drug dissolution; 4) the mass transfer resistance at the surface is negligible.
The cylindrical matrix in the dispersed solute system can be primarily divided into two regions: the surface region, R < x < S, in which all solute is dissolved, and the core region, 0 < x < R, in which the undissolved solute exists. Here, S corresponds to the radius of the entire matrix, R is the radius of the unextracted core and r is the polar radial position. The two regions are separated by the diffusion front, x = R, which moves inward as time progress. The concentration in the unextrcted region (r < R) is constant and the concentration in the partially extracted region, R < r < S, is a function of both time and position variable r and is determined by transient diffusion according to Fick’s second law:
where C is the concentration of solute in the polymeric matrix and D is the diffusion coefficient. Assuming equilibrium between the surface and the external fluid at all times without any mass transfer resistance in the fluid, the initial and boundary conditions are:
where Cs is the solubility limit of the solute in the matrix, R(t) is the time dependent position of the moving diffusion front, A is the initial solute loading per unit volume, Cb(t) is the external bulk concentration at time t and k is the equilibrium distribution coefficient between the matrix and the external solution. Equation (4) states that the finite external medium concentration is related to the concentration at the surface (r = S) by the partition coefficient k. It is more convenient to combine Equation (4) with a total mass balance at any time t to obtain an alternative boundary condition:
where λ is the effective volume and is defined as,
where V is the total external fluid volume and σ is the surface area of the cylinder. The mathematical description of the problem then consists the governing Equation (1), and boundary and initial conditions Equation (2), Equation (3), Equation (5) and Equation (6).
Defining dimensionless variable as:
Then the equations (1), (2), (3), (6), and (5) can be reduced, respectively, to their dimensionless forms:
where K is defined as:
Now using the transformation:
the dimensionless concentration becomes a total function of U as follows:
The dimensionless diffusion equation, Equation (9), then becomes:
which yields on integrating:
where B1 and B2 are constants of integration.
By using boundary conditions (8) and (10), we get,
where B1 is: (see Equation (20))
Using boundary condition Equation (11) gives:
The solution of this differential equation with initial condition Equation (13) should give the dimensionless moving front position as a function of time. But Equation (21) gives at, a solution for cannot be obtained using the initial condition (Equation (13)). A value of at other than is needed as an initial condition for the numerical solution of Equation (21). During a sufficiently short period of initial release, i.e. small, the amount of released solute should be small enough that solute concentration in the external volume remains low and the diffusional driving force for release is not altered. Perfect sink condition can be assumed to apply during this initial period. Therefore at short times, release kinetics and the time profile of the moving diffusion front, , should both be independent of the size of the external volume. An exact solution for dispersed solute release from a planar matrix into a perfect sink has been developed by Paul and McSpadden [
By calculating for sufficintly small value of at any solute loading level from Equation (22) and using these values as an initial condition, Γ verses τ profiles can be found by numerically solving Equation (21).
The cumulative amount of solute released, Mt, can be calculated by:
and the theoretical total amount of solute, or the amount releasable at infinite time, , is :
Combining Equation (19), Equation (23) and Equation (24), the resulting fractional release becomes:
The fractional release, , of a solute at time t can be calculated from Equation (25) by substituting Γ(τ) profiles getting from the solution of Equation (21). But a solution for Γ(τ) cannot be obtained using the initial condition Equation (13). So we adopt the initial condition (Γ0, τ0) from Paul and McSpadden solution [
is necessary to determine if the solution for Γ(τ) is sensitive to the initial conditions selected. The duration of the initial period when perfect sink conditions pertain should depend on the effective volume of the external medium. Choosing a small effective volume, λ = 5, when we expect great sensitivity, Γ(τ) solutions were obtained from Equation (21) using varying values of (Γ0, τ0) pairs from Equation (22) as the initial condition. The results for two drug loadings, A/Cs = 2 and 21, are shown in
Fractional release profiles obtained using τ0 = 10−4 for various solute loading levels and different values of λ are shown in
value of A/Cs, fractional release decreases as the external volume decreases. This result is consistent with the expectation that as external volume decreases, solute concentration build up in the external volume accelerates, and hence the rate of decrease in the diffusional driving force also accelerates.
An exact moving boundary solution has been presented and analyzed for the diffusional release of dispersed solute from a cylindrical matrix into a finite external medium. The moving diffusion front and the fractional solute release have been calculated with various drug loading levels and different external volumes.