^{1}

^{1}

^{1}

^{1}

As it is known, the main purpose of production of cotton fiber in the technological processes is to produce high quality cotton fiber. Lots of processes in the enterprise have a loss of cotton fiber, which is a valuable raw material for the textile industry.

The production of cotton products and the cotton industry occupies an important place in the economy of Uzbekistan, as a result of which a number of decrees and higher-level decisions on the cardinal transformation of this sphere of the economy have been adopted lately [

Currently mechanical method of catching not-well-ginned seeds and free fiber is being used, and in this process fiber and seeds can get harmed as well.

One of the main advantages of vibro-catchers for not-ginned fractions of cotton seeds and free fiber is the absence of punching effect to material. At our institute and at “Kosonsoy cotton fiber” company, a kinematic awakening device was designed and manufactured to capture unprotected seeds and free fibers.

In our research, theoretical researches on the possibility of forming one-layered flow of processed seed fertilizers were conducted and conditions for their acceleration were determined.

The most common type of freed slaughtered cotton and the state of products obtained after its destruction is the shift in the center of gravity of the particles resembling (

We examine the static balance of three cotton seeds, which are taken in the form of short cylinders, one of which is associated with the remaining two remaining drain off surfaces. First we will consider the symmetric arrangement of the upper cylinder with the weighted velocity of m and R determined by R. The lower cylinders have a homogeneous radius (R_{0}) and mass (m_{0}), equal to 2l in the balance position.

Let’s define the cylinder balance condition, in which case we call the half-corner angle as φ_{0}.

Particularly, in the cotton mass taken after ginning process, there are also fibered seeds, which can get into lint during lintering process. In order to solve this problem, devices that allow separating fibered seeds according to geometrical parameters and fertility have been tested [

One of them is a net-faced sorting device, proposed by the authors of the article. In this article, theoretical researches on the movement and selection of seeds on the net surface of the device were conducted. Let’s assume that the three seed systems move horizontally along a plain surface under a corner (_{1} and m_{2}, considering seeds as cylinders [

From the center of the upper seeds to the plains the initial time is equal to h_{0}, and the unification of seeds during motion takes place only between the upper and lower seeds. At point 0, let’s set the coordinate head, we set the OX axis along the plain and the ОУ axis at the perpendicular position. We define the coordinates of seeds as M_{1} (X_{1}Y_{1}), M_{2} (X_{2}Y_{2}) and M_{3} (X_{3}Y_{3}).

As generalized coordinates, we accept the angle φ and X between M_{1}0_{1} and M_{1}M_{2} vectors. With respect to the X0Y coordinate system, the center of cylinders is determined by following formula:

X 1 = X ; X 2 = X − l sin φ ; X 3 = X + l sin φ ; Y 1 = h 0 + l cos φ ; Y 2 = R ; Y 3 = R ; (1)

The seeds are affected by the interaction force in areas where they are bonded together and in areas where the bottom seeds are attached to the plain [

The projection of the forces affecting the upper seeds will be as follows:

X 1 = m 1 g sin λ + f 1 m 1 g cos ( φ − λ ) cos φ − f 1 m 1 g cos ( φ + λ ) cos φ ; (2)

Y 1 = − m 1 g cos λ + f 1 m 1 g cos ( φ − λ ) sin φ + f 1 m 1 g cos ( φ + λ ) sin φ ;

Lower seeds also have the following:

X 2 = − m 2 g cos ( φ − λ ) sin φ + f 1 m 1 g cos φ + m 2 g f 2 cos λ ; (3)

Y 2 = m 1 g cos | φ + λ | cos φ − f 1 m 1 g cos ( φ + λ ) sin φ − m 2 g f 2 sin λ ;

X 3 = m 1 g cos ( φ − λ ) sin φ − f 1 m 1 g cos ( φ − λ ) sin φ − m 2 g f 2 cos λ ; (4)

Y 3 = − m 1 g cos ( φ − λ ) cos φ + f 1 m 1 g cos ( φ − λ ) sin φ − m 2 g f 2 sin λ .

In this: f 1 ; f ―coefficients of friction and the friction of cotton seeds. Q x ; Q y ―to identify the aggregate forces δ x 1 ; δ x 2 ; δ x 3 ; δ y 1 ; δ y 2 ; δ y 3 . Variations:

δ A = x 1 δ x 1 + x 2 δ x 2 + x 3 δ x 3 + y 1 δ y 1 + y 2 δ y 2 + y 3 δ y 3 ;

Hereby, we (1) shall have the following:

δ x 1 = δ x ; δ x 3 = δ x − l 1 cos φ δ φ ; δ x 3 = δ x + l 1 cos φ δ φ ;

δ y 1 = − l sin φ δ φ ; δ y 2 = 0 ; δ y 3 = 0 .

δ_{А} the expression for the following appears:

δ A = x 1 δ x 1 + x 2 ( δ x − l cos φ δ φ ) + x 3 ( δ x + l cos φ δ φ ) + y 1 ( − l sin φ δ φ ) = ( x 1 + x 2 + x 3 ) δ x + ( − x 2 l cos φ − y 1 l sin φ + x 3 l cos φ ) δ φ .

Q x ; Q y ―we define generalized forces and their δ x and δ y coefficients:

Q x = x 1 + x 2 + x 3 ;

Q y = l ( − x 2 cos φ − y 1 sin φ + x 3 cos φ )

(2), (3) and (4) x 1 , x 2 , x 3 , y 1 after setting values we get the following:

Q x = m 1 g sin λ + m 1 g sin λ [ cos ( φ − λ ) − cos ( φ + λ ) ] = m 1 g sin λ + m 1 g sin 2 φ sin λ (5)

Q y = l { [ m 1 g cos ( φ + λ ) sin φ − f 1 m 1 g cos ( φ + λ ) cos φ − m 2 g f 2 cos λ ] cos φ

To create an equation of motion we find the kinetic energy of the system: T = T 1 + T 2 + T 3 ; where T 1 , T 2 , T 3 ―kinetic energy of the first, second and third seeds respectively [

T 1 = m 1 2 ( x ˙ 2 + l 2 φ ˙ 2 sin 2 φ ) ; T 2 = m 2 2 ( x ˙ − l φ ˙ cos φ ) 2 T 3 = m 3 2 ( x ˙ + l φ ˙ sin φ ) 2 (6)

Total kinetic energy equals:

T = m 2 ( x ˙ 2 + l 2 φ 2 sin 2 φ ) + m 2 2 [ ( x ˙ − l φ ˙ cos φ ) 2 + ( x ˙ + l φ ˙ sin φ ) ] = m 2 ( x ˙ 2 + l 2 φ 2 sin 2 φ ) + m 2 2 ( 2 x 2 + 2 l 2 φ 2 cos 2 φ ) = m 1 2 ( x ˙ 2 + l 2 φ sin φ ) + m 2 ( x ˙ 2 + l 2 φ 2 cos 2 φ )

This equation is integrated with Runge-Kutta method on the following initial conditions:

when t = 0 then φ = φ 0 , Y ˙ = 0

in this: φ 0 < φ п р , φ п р ―the boundary angle to start the movement. It is determined by the equation: A ( φ 0 ) = 0 ; B ( φ ) = 0 .

To solve the Equation (6) by the Runge-Kutta method, an exposure program has been created. The following conditions have been met for as account [

λ = 10 0 ;

d = 10 mm;

n = 1 ; f 1 = 0.5 ; f 2 = 0.5 ; φ = 59 0 .

coordinates of the location of the seeds on the screening surface in time are basically of an ascending nature. And this shows that with these parameters, the seeds on the surface of the grid are moved and the sorting process is possible.

2―there are graphs of seeds in non-linear values, obtained from the calculation of the seed residence time on a perforated surface. The theoretical calculations allowed the following conclusions. The time of movement of the top cotton in the lower plain depends on the angle of the surface, the friction coefficient for the seeds on the surface, the friction coefficient of the seeds and the initial state of the seeds.

Comparison of the results of the calculations with the vibration shows that the vibration of the plain helps to move the seeds together, resulting the 1.5 ... 2.0 times decrease in upper cylinders reaching the plain.

Thus, our studies recorded the main parameters that determine the process of vibrational sorting, which showed that the most effective sorting occurs at an amplitude of А = 17 mm, frequency of f = 4 c − 1 , and the thickness of the seed layer does not exceed h = 30 mm.

The authors declare no conflicts of interest regarding the publication of this paper.

Avazbek, O., Mirzaolim, S., Ibrohim, M. and Shokir, A. (2018) The Theoretical Studies of the Cultivation of Three Cotton Seeds along the Plain. Engineering, 10, 514-520. https://doi.org/10.4236/eng.2018.108037