^{1}

^{1}

^{*}

A simple mathematical model for the exudative retinal detachment has been developed. The model takes into consideration a typical retinal blister with unknown shape and the fluid flow caused by its accumulation in the subretinal space through the fluid-leakage into the subretinal space from the choriocapillar is across the outer blood-retina barrier described by Darcy’s law. The theory of bending beams is applied to model the deformation of the retinal blister. The boundary value problem describing the retinal deformation in dimensionless form is solved using the perturbation method. The computational results for the retinal deformation are presented through graphs to illustrate the sensitivity of the deformation to the elastic modulus, the moment of inertia and intraocular pressure and discussed.

The multi-layered retina is an effective transducer and functions as a light-re- ceptor. The retina is connected to the vitreous body through its internal limiting membrane layer and with the choroid through the Bruch’s membrane. The outer surface of the neurosensory retina is apposite to the retinal pigment epithelium, an outermost layer of the retina. In most of the area/region, the retinal pigment epithelium and the sensory retina are easily separated to form the subretinal space but the spread of subretinal fluid (SRF)/space is limited because the sensory retina and the pigment epithelium are firmly bound together at the optic disc and the ora serrata. The vitreous humor, liquefied vitreous and a fluid leaking outside the blood vessels of retina and/or the choroid percolating into the subretinal space may accumulate in the subretinal space. The accumulation of fluid in the subretinal space separates the neurosensory retina from the retinal pigment epithelium. The separation can occur when the adhesion forces between the two layers are overpowered/overcome by other different forces. The ageing, cataract surgery, myopia and trauma are some of the most common factors that contribute to the process.

Retinal detachment, which is a significant cause of blindness, must be dealt/ considered as a serious medical problem/emergency. After its occurrence of flashes of light and/or floaters in the visual field precedes, a dark shadow interfering with vision is perceived by the patients. The peeling away of the neurosensory retina from the underlying retinal pigment epithelium may result in the retinal detachment which is an affliction/disorder affecting many people. In the initial stages, the detachment may be localized, but, in the case of lacking its prompt and proper treatment, this may lead to progressive vision loss and subsequent blindness.

The three types of detachment distinguished are: (i) Retinal rhegmatogenous detachment (RRD), in which a hole or tear or break in the thin retinal layer forms and allows vitreous humor to pass from the vitreous body into the sub- retinal space between the sensory retina and the retinal pigment epithelium, (ii) Retinal tractional detachment (TRD) which is caused by pulling the neurosensory retina away from the RPE by fibrovascular tissue, caused by trauma, inflammation or neovascularization, (iii) Retinal exudative (or serous) detachment (ERD) in which a blister forms without a retinal hole. Inflammation, injury, or vascular abnormalities (e.g. choroid disruption) cause(s) it. This leads to fluid build-up/accumulation in sub-retinal space without the presence of a hole, tear or break.

The fluid accumulation in the subretinal space is a common characteristic in all types of retinal detachment. Different mechanisms may be involved in different types of the detachments. A shrinkage in vitreous body results in vitreous contraction. A tear, or hole or break in neurosensory retina allows the flow of vitreous humor, liquefied vitreous into the subretinal space under the pressure- differential across the retina and fluid accumulation occurs therein. Sometimes neurosensory retina is pulled off the retinal pigment epithelium by external traction forces. The seepage of fluid which leaks through the blood retina barrier into the subretinal space develops a fluid build-up in the interstitial space. The fluid accumulated in the subretinal space pushes away the neurosensory retina which results in the retinal detachment. The retinal tension forces contribute to the detachment.

Under some pathological conditions, the fluid leakage from the retinal veins and/or choriocapillaris into the subretinal space exceed the fluid flow away/ outward actively pumped by the retinal pigment epithelium layer and a blister may result between the retina and the retinal pigment epithelium layer without a retinal tear. The interposed blister of accumulated subretinal fluid prevents the retina from its properly functioning. This situation causes an exudative retinal detachment, also called a serous retinal detachment. The failure of the retinal pigment epithelium actively pumping away of subretinal fluid, the increased/ enhanced substrate leakiness across the outer blood retina barrier due to the inflammation of the choriocapillaris, the excessive leakage of the serum through the walls of retinal veins due to the blockage in the vessels outward into the subretinal space contribute to the development of the exudative retinal detachment. Besides, some other factors such as the vitreous forces that pull the retina from the retinal pigment epithelium layer, may have some role in the detachment.

The retinal detachment is an ocular disorder which is well established and various therapeutic methods for its treatment have been evolved and are available. Despite numerous studies, its mechanism is not clearly elucidated and adequately described. In addition to experimental studies, several mathematical models [

Fitt et al. [

The present paper is concerned with the formulation of a mathematical model for the exudative retinal detachment. The model takes into consideration the fluid seepage into the subretinal space from the choriocapillaris and/or retinal veins and active outward pumping of the subretinal fluid by the retinal pigment epithelium. The retinal blister of accumulated subretinal fluid between retina and retinal pigment epithelium is approximated as a spherical section.

A typical location of retinal blister is considered for the mathematical treatment of the exudative retinal detachment. In this type of the detachment, a retinal blister is formed between the retina and the RPE layer due to the subretinal fluid accumulation without the retinal tear. In view of the inward propagation of the retinal blister and its possible slow spread along the interface between the sensory retina and the retinal pigment epithelium, the flow of the subretinal fluid is assumed as a steady-state two dimensional flow. The subretinal fluid is treated as an incompressible Newtonian fluid with constant viscosity

Applying the lubrication theory approximations to the Navier-Stokes equations and continuity equation for the slow flow of subretinal fluid between the retinal blister and the RPE layer, the governing equations of the problem reduce to the form:

where

where K is the permeability and

Solving Equation (1) subjecting to the boundary conditions (4i) and (4ii) we have,

From Equation (3) with boundary condition (5ii), we have,

The seepage of the fluid across the blood-retina barrier into the subretinal space is described by the Darcy’s law for the flow in porous media.

where d is the width of blood-retina barrier and

From boundary condition (5i),

Comparing Equation (9) and (10),

The position/displacement of the retinal blister depends on the pressure differential across it arising from the different pressures acting on the retinal blister. The theory of bending beams can be applied to describe/model the displacement/deformation of the retinal blister. The pressure differential across the retina is balanced by the intensity of the loading on it and the deformation of the retinal blister is described by a fourth order linear ordinary differential equation:

where E and I are the modulus of elasticity and the moment of inertia of retina, respectively.

In order to solve Equation (12) which is a fourth order linear equation, we must have appropriate boundary conditions that describe the constraint imposed by the hinges. We assume that the beam has a clamped end, therefore the boundary conditions are

First and last boundary conditions imply that both the ends of the retinal blister are horizontal. The assumption of no shearing force acts on the middle point of the blister is modeled by second boundary condition.

Rearranging Equation (12),

Using these values in Equation (11),

where

The parameters can be non-dimensionalised using the scaling,

We now non-dimensionalise Equations (12) and (14) using the above non- dimensional parameters,

where

And

with boundary conditions,

Equation (16) is a nonlinear 6th order differential equation and in order to solve it we need six boundary conditions. Equation (13) shows that we already have four boundary conditions, so we need two more. Thus we rearrange and non-dimensionalise the boundary conditions in (6i) and (6ii), to give the two more conditions.

Dropping bars for convenience from here onwards.

For

Now solve the Equation (16) by using regular perturbation method where we assume that,

Using Equation (18) in Equations (16) and (17) we have,

with boundary conditions,

Comparing for zero order we have,

It means either

Or

Solving Equation (20) with boundary conditions (19),

Substituting (22) into Equation (18) we have,

The sensitivity of the exudative retinal detachment to the elastic modulus and moment of inertia of the retina has been illustrated through the curves in Figures 2(a)-(c) and Figures 3(a)-(c). Also the effect of intraocular pressure on the detachment has been presented through the graphs in

It is observed from the graphs in Figures 2(a)-(c) that the deformation profiles of retinal blister is not linear and it decreases with an increase in the value of elastic modulus. It suggests that a decrease in the elasticity of the neurosensory retina tends to retard the exudative retinal detachment.

It is evident from the graphs in Figures 3(a)-(c) that the deformation/dis- placement of retinal blister is decreased with an increase in the moment of inertia. It illustrates that an increased value of moment of inertia of the sensory retina tends to decrease/retard the exudative retinal detachment.

Parameter | Description | Typical physiological value |
---|---|---|

L^{ } | Length of the detached retina^{ } | 1 mm*^{ } |

Vascular pressure | 15 - 25 mmHg** | |

Intraocular pressure | 10 - 20 mmHg** | |

E | Retinal Yung’s modulus | |

I | Moment of inertia |

^{*}Estimated and used by Z. Ismail [

The effect of intraocular pressure on the deformation of retinal blister has been depicted/displayed in Figures 4(a)-(c). An observation of the curves demonstrates that an increase in the intraocular pressure causes an increase in the displacement. Thus, a rise in the intraocular pressure results in an increase in the retinal detachment.

A more realistic scenario involves a localized retinal detachment, or blister, under which subretinal fluid has accumulated. In view of the observations of the computational results of the deformation/ shape of the retinal blister, it is suggested that any therapeutic procedure that tends to decrease the elasticity of the retina and/or to increase the moment of inertia of retina and/or to elevate the intraocular pressure may help to treat the exudative retinal detachment. This result is supported by a number of experimental observations [

The authors are gratefully acknowledged to Dr. Rashmi Srivastava (Department of Mathematical Sciences and Computer Application, Bundelkhand University, Jhansi) for the constructive suggestions in view of which the work has been improved.

Avtar, R. and Srivastava, S. (2017) Mathematical Modeling of Exudative Retinal Detachment. Applied Mathematics, 8, 44-56. http://dx.doi.org/10.4236/am.2017.81005