The initial boundary value problem of the transverse vibration of a taut string is a classic that can be found in many vibration and acoustics textbooks. It is often used as the basis for derivations of elementary numerical models, for instance finite element or finite difference schemes. The model of axial vibration of a prismatic elastic bar also serves in this capacity, often times side-by-side with the first model. The stored (potential) energy for these two models is derived in the literature in two distinct ways. We find the potential energy in the taut string model to be derived from a second-order expression of the change of the length of the string. This is very different in nature from the corresponding expression for the elastic bar, which is predictably based on the work of the internal forces. The two models are mathematically equivalent in that the equations of one can be obtained from the equations of the other by substitution of symbols such as the primary variable, the resisting force and the coefficient of the stiffness. The solutions also have equivalent meanings, such as propagation of waves and standing waves of free vibration. Consequently, the analogy between the two models can and should be exploited, which the present paper successfully undertakes. The potential energy of deformation of the string was attributed to the seminal work of Morse and Feshbach of 1953. This book was also the source of a misunderstanding as to the correct expression for the density of the energy of deformation. The present paper strives to settle this question.
The study of transverse waves propagating in infinite or finite taut strings often contributes to the foundations in undergraduate curricula concerned with vibration and sound. The model frequently appears in graduate and undergraduate textbooks [
The model of axial vibration of a prismatic elastic bar also fulfills these functions, oftentimes side-by-side with the first model. The two models are mathematically equivalent in that the equations of one can be obtained from the equations of the other by substitution of symbols such as the primary variable and the resisting force. The analogy between the two models can and should be exploited to reinforce the reader’ understanding of the workings of the models and of the solution processes.
Contrary to expectation, the two models despite being equivalent in all other respects are at variance in the derivations of the stored (strain, potential) energy. The taut string model potential energy is derived from a second-order expression of the length of the string, whereas the potential energy stored in the axially deformed bar is derived using an argument based on the work of the resisting forces. The second-order-effect explanation of the source of potential energy stored in the taut string only serves to confuse, since the change in length of the string plays no role in the rest of the model. The present work shows that such a device is unnecessary and can be replaced with a derivation that perfectly parallels the model of axial deformation of an elastic bar. The correct expression for the potential energy is recovered and we claim that it is derived in a way that is of most utility in applications in vibrations and acoustics.
In Section 2, we introduce the notion that boundary-value problems described by analogous equations can be derived following analogous steps. Namely in our investigation we are interested in deriving the expression for the potential energy of deformation. The two analogous models are the model of axial deformation of an elastic bar and the taut-string model.
In Section 3, we derive the potential energy of deformation stored in an axially deformed elastic bar by applying a thought loading process and tracking the work of the forces acting on the differential element of the bar on the displacement increments associated with the progression through the loading process. The expressions that we obtain in this way are then re-interpreted in Section 2 for the string boundary value problem.
In Section 5, we review the literature going back to the main sources which include the famous Rayleigh treatise The Theory of Sound, but also touch upon a fairly recent string of papers that address various aspects of the derivations of the potential energy of deformation of the taut string. We critically examine the evolution of the expression derived for the potential energy of deformation in the influential literature of the last century and we correlate our approach with the established arguments. We show that even though the end product is, as could be expected, the same as that derived by Rayleigh, the process, especially in textbooks, is elucidated in the alternative way we propose.
The derivations in this work are produced for a static model of deformation. That is not a limitation as the potential energy of deformation for the two discussed present models does not depend on the velocities or accelerations by definition. Consequently the present derivations are directly applicable to models of transient or free vibration, both for the axial bar treated in this section and for the model of a taut string treated in the next section.
The model of the axial deformation of the linearly elastic bar is described by the following statements:
1) The bar is prismatic of cross-sectional area A and straight of length L. The coordinate
2) The cross-sections of the bar remain planar and the points within the cross-sections move by displacement
3) The material is linearly elastic, described by the modulus of elasticity E.
4) The elastic resisting force is expressed as
5) The bar is loaded by distributed axial force
6) The equilibrium of a differential element of the bar is written as
7) The boundary conditions are expressed either in terms of prescribed displacement or in terms of applied force. Denoting the cross-section where the displacement is prescribed as
and
The model will be referred to in the following as BAR.
The model of the planar transverse deformation of the taut string is the model we wish to investigate in this paper with respect to the derivation of the potential energy of deformation. The model is described by the following statements:
1) The string of length L is initially straight. The coordinate
2) The points along the centerline of the string move by displacement
3) The string is prestressed by a uniform and unchanging force P.
4) The resisting (transverse) force is expressed as
5) The string is loaded by distributed transverse force
6) The equilibrium of a differential element of the bar is written as
7) The boundary conditions are expressed either in terms of prescribed displacement or in terms of applied force. Denoting the cross-section where the displacement is prescribed as
and
The model will be referred to in the following as STRING.
We see that the two boundary value problems, BAR and STRING, are described by the same kinds of equations. We can get one boundary value problem from the other by the substitution
Therefore, we expect to be able to derive the potential energy of deformation for the BAR model and then obtain the potential energy of deformation for the STRING model by the symbol substitution (9). Even more useful is the ability to repeat the derivation for the STRING model using the substitution (9) applied to the derivation performed for the BAR model and thereby extract a physical understanding of the quantities involved and the meaning of the actions in which they participate.
Elementary vibration textbooks typically include a derivation of the potential energy that is developed like this: Consider a linear spring (
We believe that a consistent elementary argument should be patterned on the above reasoning. We shall now proceed to demonstrate the derivation of the potential energy of deformation on the BAR model.
We shall assume that the potential energy of deformation is sought for a given displacement function
For simplicity we shall assume that the dependence on the load parameter is linear, so that we have for the displacement
and the body load is also ramped up linearly
Importantly, substituting (10) into the definition of the restoring force F results in
Consequently, during the process of imposing the target deformation the equilibrium of any differential element of the bar is maintained.
Consider now an increase of the loading parameter from
Using Equation (10) allows us to rewrite (13)
so that the increment of the displacement from
Similarly in the right-hand-side cross-section the displacement increases to
which leads analogously to the increment of the displacement in the right-hand-side cross-section
Using the Taylor expansion in x for the displacement we can re-write (17)
Let us now look at the left-hand-side cross-section: The force acting here works during the incremental change of the displacement from
where the negative sign indicates that the force in the left-hand-side cross-section points against the x axis. Substituting (15) results in
Analogously, in the right-hand-side cross-section the restoring force
Substituting (18), we obtain
where the force can also be expanded in a Taylor series
to yield for (22)
The work performed on the differential element of
which can be approximated by canceling and omitting the second-order term in the differential
Next we will consider the distributed body load. The body load works on the increment of the displacement of the differential element from
A more complicated approximation formula could have been used, such as the midpoint rule or the trape- zoidal rule. However, the result (27) would still stand as we would have to neglect all terms with higher powers of the differentials than linear.
The work of all the forces acting on the differential element of the bar between
which may be regrouped as
Using (11) and (12), we see that the bracket will vanish
because the balance Equation (2) is satisfied. Consequently, the work of all the forces acting on the differential element of the bar between
where we have used (12) again. The work performed on the differential element over the entire loading process is obtained by integration with respect to
This work is stored in the differential element of the bar as energy of deformation. The density of the energy of deformation is consequently the expression
Substituting the definition of the axial force (1) reduces the above to the familiar formula
Note that the potential energy of deformation of the entire bar can be obtained by integration over the length
As advertised, the deformation energy for the STRING model can be written immediately from (34) by exchange of the symbols as defined in (9)
More importantly, we can now unravel the physical meaning that leads from the equilibrium of the dif- ferential element as shown in
and the increment of displacement of the right-hand-side point will be
The transverse force S works on the increments of displacement at the two endpoints of the element so that using the steps outlined above Equation (29) we arrive at
Applying the balance Equation (29) results in
in complete parallel to Equation (31). We can see that the restoring force
The energy of deformation in the entire string is of course obtained by integration along the length
Morse and Feshbach [
concerned. The book contains two derivations of the density of the energy of deformation. We have been able to follow these two arguments to their apparent source of [
In the first approach to the calculation of the potential energy of deformation Morse and Feshbach [
The applied force on an element
This leads to the density of deformation energy
The deformation energy of the entire string is consequently obtained by integration as
Then in order to arrive at a symmetric expression (as in our Equation (41)), integration by parts is applied, which in addition to the integral of the energy density (41) also includes a boundary term (i.e. product of slope and deflection at the ends of the string)
The argument leading to (42) will be in the following referred to as CURV.
Expression (44) is undoubtedly wrong. The boundary term vanishes for homogeneous boundary conditions, but does not in general vanish for inhomogeneous boundary conditions and thus the energy of deformation be- comes dependent on the rigid body motion of the string. For arbitrary values of
Also, we can highlight the problem directly from (42) by adding rigid body translation A to the deflection curve
Equation (42) cannot be the correct energy of deformation density as it depends on rigid body motion. Furthermore, expression (44) mixes together potential energy of two different kinds: the potential energy of deformation and the potential energy of the applied loads (or work). Equation (44) is in substantial disagreement with the customary meaning of variational methods, such as the principle of total potential energy [
As the authors of [
It is therefore concluded in [
Argument ELONG was already advanced by Rayleigh [
The matter of the energy of deformation of the taut string has also been subject to some critical examinations over the years. Matthews [
Formula (48) (obtained using the argument ELONG) is identical to our (44). The result is undoubtedly correct, but that does not mean that the derivations are mutually replaceable. We believe an elementary treatment should follow the pattern outlined in Section 3. The problems with the ELONG argument are the following:
1) The prestressing force P is not the restoring force. By assumption P is an input (property). It does not react to the elongation of the string (which varies from point to point). In order for researchers to appreciate this distinction they need to be aware of the (second-order, nonlinear) theory of the response of structures under prestressing (initial) forces/stresses.
2) Elongation is not needed anywhere in the model and is solely enlisted in the calculation of the energy of deformation, where it makes its appearance almost as an invocation of deus ex machina.
3) The fact that the density of the energy of deformation is the entire product of (force × elongation) instead of one half of this product is a potential source of confusion to readers of elementary treatments. The fraction 1/2 that appears in (48) is part of the relative elongation, it is not employed to take one half of the product (force × elongation) (i.e. the area of the triangle underneath the force-displacement triangle in
The derivation of the potential energy of deformation for the transverse deflection of a taut string was carried out in complete analogy with the equivalent model of the axial deformation of a linearly elastic prismatic bar. The resulting expression is the same as that which appears in many textbooks and monographs since the days of Rayleigh and his famous treatment in the Theory of Sound. However, the path followed is different. We believe that the consistent derivation of the potential energy of deformation from the equilibrium of a differential element provides the clarity and insight from which users of elementary treatments of vibrations and sound can only benefit.
ZachCaamaño-Withall,PetrKrysl, (2016) Taut String Model: Getting the Right Energy versus Getting the Energy the Right Way. World Journal of Mechanics,06,24-33. doi: 10.4236/wjm.2016.62004