In order to move towards a more sustainable development, it is necessary not only to minimize the use of materials in the design stage and to find new materials as alternatives to nonrenewable ones (e.g. optical fiber instead of copper, biopolymers instead of polymers from oil) but also to reclaim as much as possible material value through effective recycling. To this extent, recycling can play a key role in multiple dimensions, while providing new business opportunities for innovative companies, having positive impacts on the society and the environment and fostering an effective circular economy as well. Because of the advanced waste management infrastructures available in developed countries, it is possible to achieve an almost complete collection of solid wastes into a variety of controlled bulk material flows. However, the picture for the follow-up step, the recycling of raw materials such as steel, non-ferrous metals, polymers and glass from these flows, is less positive. Materials value recovered from waste represents a very small fraction of European GDP. The fundamental issue is that policymakers still lack an effective key performance indicator for stimulating the recycling industry. Therefore although recycling plays an important role in the circular economy perspective, it is necessary to radically change the metric used so far to compute the recycling rate. Nowadays, the recycling rate is computed measuring the amount of material entering the recycling facilities. This approach has brought about an inaccurate and somehow misleading indicator (the recycling rate) which contributed to wrong decision making and to poor innovation in the industry. The new approach proposed in this paper considers the use of a Circular Economy Index (CEI) as the ratio of the material value produced by the recycler (market value) by the intrinsic material value 1 entering the recycling facility. It is argued that this index is related to strategic, economic and environmental aspects of recycling and it has very important implications as decision making tool. To compute the CEI it is necessary to know detailed information of the components and materials contained in each end of life (EOL) product entering the recycling facilities and how they end up in the recycled raw materials. Therefore an accurate accounting of materials (with standards if available), mass, chemical composition and smallest dimension (e.g. a screw, a plastic foil) is proposed.
The linear take-make-dispose economic model relies on large quantities of easily accessible resources, and as such is increasingly unfit for the reality in which it operates [
In order to move towards a more sustainable development and at the same time create opportunities for economic growth, a fundamental transformation in producer and consumer behavior is needed. It is crucial to increase the resource efficiency of production optimizing the use of materials in the design stage and to find new materials as alternatives to nonrenewable ones (e.g. optical fiber instead of copper, biopolymers instead of polymers from oil). In many countries, it is also necessary to improve the resource efficiency of collection. However, what is most urgent is to minimize the amount of materials which are currently disposed of, through effective recycling (cf.
The waste management infrastructure of Europe is already well developed so that it achieves an almost complete collection of solid wastes into a variety of controlled bulk material flows [
Therefore although recycling is currently playing an important role in the circular economy perspective, it is necessary to radically change the metric used so far to compute the recycling rate. Nowadays the recycling rate is computed measuring the amount of material entering the recycling facilities. This approach has brought about an inaccurate and somehow misleading indicator (the recycling rate) which contributed to wrong decision making and to poor innovation in the industry [
It is well known that material recycling is beneficial not only for the environment but also for the economy and the society at large. Every kilogram of recycled material can replace primary material and therefore displaces the activities that are needed to locate, mine and process it. All such activities use energy, release pollution and alter the landscape in ways that are perceived as a danger to the environment. Some raw materials (e.g. cobalt, copper, platinum, neodymium, etc.) involve also relevant social issues such as conflicts to access minerals, human rights violations, black market, etc. [
Because of the advanced waste management infrastructures available in developed countries, large amount of end-of-life (EoL) industrial and consumer products are available. Despite their potential value, these EoL products are still called waste residuals instead of “surface mines” waiting to be exploited [
tablished that increasing the efficient use of resources creates economic value (at firm, national and European level) and that the production of secondary materials is inherently more labor-intensive and less energy intensive than the production of primary materials [
Europe has the world’s highest net imports of resources per person, and its open economy relies heavily on imported raw materials and energy. Secure access to resources has become an increasingly strategic economic issue, while possible negative social and environmental impacts on third countries constitute an additional concern [
Considering that by 2050 the world population will hit 10 billion people, the increase in material use that would occur even at the current development levels and resource consumption patterns will reach about 180% of the 1990’s level [
Besides the implications of the fact that materials extracted from the earth and utilized for economic purposes are not literally “consumed” but become waste residuals that do not disappear and may cause environmental damage and result in unpaid social costs [
Although the CE approach contrasts with the mind-set embedded in most current industrial operations where even the terminology (value chain, supply chain, end user) expresses a linear view, several benefits may rise from the shift to the Circular Economy model and to a more resource-efficient path.
Since the early days of industrialization, companies mine and extract materials, use them to manufacture goods and sell the goods to customers (or end users) who dispose of them when they become obsolete or no longer useful. Some 65 billion tons of raw materials entered the economic system in 2010 and this figure is expected to grow to around 82 billion tons in 2020 [
The material saving potential arising from the transition to a CE model and to a more resource efficient path is estimated to 500 billion ?per year for the European industry [
Taking into account the facts outlined above, we do believe that it is necessary to stimulate recycling through proper legislation and effective financial incentives. To this extent we assume that the robust and intuitive CE index proposed in this paper can help society to achieve the social, environmental, economic and strategic goalsit pursues.
To assess the environmental impact of any product throughout its life cycle, Life Cycle Assessment (LCA) is currently used [
Moreover the LCA studies provide information only on the environmental domain of sustainability, neglecting the economic and social ones which should be addressed simultaneously [
Also material flow accounting and analysis (MFA) is at present used to assess environmental as well as economic and other policies [
The Circular Economy Index (CEI) proposed in this article uses a different approach. It aims at introducing the economic value of the materials embedded in consumers products as the property to be measured and accounted. It is argued that this index is related to a wide range of strategic, economic, social and environmental aspects of recycling and is therefore a proper instrument for decision making.
An important aspect of the CEI is that it does need data that are available in the companies’ financial reports and in the bureaus of statistics so that the analysis of the performance is possible at firm as well as sector level (local, national or European).
Because the CEI intuitively represents the effectiveness of recycling firms at extracting value from the processed materials, it represents a decision making tool which will help management and policy makers to steer decision towards value creation and technological innovation.
A successful indicator for policymaking is always a compromise between the need for conceptual simplicity, the cost of evaluation and the degree to which the indicator is in parallel with current policy targets. Mass recycling rates, for example, are vastly popular for their conceptual simplicity and the relative ease of computing it for specific (categories of) EoL products (cf.
Conceptual simplicity provides an indicator with robustness and reliability: different studies will reach similar conclusions, as there is little room for alternative interpretations. For the cost of evaluation, a critical point apart from conceptual simplicity is whether the computation of the indicator requires anything beyond readily available data. In regard to these two requirements, the best indicators are those that can be computed automatically
(i.e., without issues requiring human interpretation) on the basis of data from standard, e.g. financial, reports.
Simple and cheap indicators typically point at a specific policy aspect, while they correlate, indirectly, with a number of other aspects. Mass recycling rates, for example, are directly related with the amount of waste that is deflected from landfills or incineration. Indirectly, mass recycling rates also correlate with the creation of jobs and the reduction of greenhouse gases. However, the relation between deflecting waste from landfills and creating jobs is so indirect that if creation of jobs becomes more important, at one point in time, than deflection from landfills, it makes sense to move to a different indicator.
The CEI proposed in this paper aims to be as simple as the mass recycling rate and better aligned with social, environmental and economic policies than the mass recycling rate while at the same moment, being simpler than LCA to be computed (cf.
Along with reuse and refurbish/remanufacturing, recycling plays an important role within the circular economy model and is often considered a cornerstone of a broader vision for the sustainability of a closed-loop society [
As material resources such as metal ores are becoming scarcer, there is an increasing incentive for upstream industries, such as smelters, to look for a secondary supply of resources from recycling activities. By strengthening the links between the primary resource supply sector and the recycling and waste management sector, both resource supply issues and waste management issues can be better addressed. Therefore indicators representing the recycling rate of materials and products have been used in the past. However, the definition of recycling rate varies considerably, mainly because both the numerator and denominator of the fraction that represent a recycling rate have been inconsistently chosen. The numerator often represents the amount of waste separated from waste streams for subsequent recycling, but usually the amount actually recycled is less than that separated because of the generation of residues in downstream recycling processes. This approach has brought about an inaccurate and somehow misleading indicator (the recycling rate) which might have contributed to wrong decision making and to poor innovation in the recycling industry.
The Circular Economy Index (CEI) proposed in this paper is the ratio of the material value produced by the recycler (market value) by the material value entering the recycling facility. In other words:
Although several units to measure the resource efficiency are available (e.g. mass, volume, embedded energy, carbon footprint), the economic value (e.g. ? $) has been selected because is aligns best with the present EU policies which aim at fostering social and environmental benefits for citizens. To avoid any inconsistency, the values should be measured as soon as EoL products are collected (at the beginning of Arrow 3 in
The CEI solves some problems of LCA and mass recycling rates in a very elegant way. Unlike mass recycling rates, the CEI adjusts itself automatically if some specific material becomes more expensive because it is less available, e.g. as a consequence of strategic issues, or if a material becomes cheaper because of a very efficient recycling technology.
Unlike LCA’s, the computation of the CEI does not become more complex because a material is produced in alternative ways (e.g. by the primary industry or by recycling) or at different qualities. Producers will always use the cheapest material that fit the required quality, and so the CEI will automatically adjust.
As recycling rate does, CEI is easy to be computed and it uses data which are easily made available. From management point of view it is easy to understand and compute it without doing complex calculations or calculations which use estimates to be performed. However from the scientific point of view, the recycling rate is not a suitable indicator because it is not directly related to what we want to achieve (it is not clear how it correlates to the societal impacts (economics, job creation, environment, strategic, ethical issues)). On the other hand, the LCA based thinking is rather good from the scientific point of view the, but from the management point of view is not feasible because it requires complex calculations which sometimes need estimate numbers to be performed.
While it won’t be possible to enforce a law requiring that all companies should perform an LCA, it will be
possible to do it with the CEI because it is easy to be interpreted and computed and does not require extra human resources to be done. These two points are extremely important for successful policies. We can only have successful policies if we have a driver (the index), if we can measure it, if it is clear to everybody what it means, and if it is related to what we want to achieve. Furthermore it should be noticed the need of policies which speed up circularity. Although current policies stimulate waste collection, most materials are not properly re-used or recycled (e.g. plastics).
To compute the CEI for a specific EoL product, it is necessary to know detailed information of the components and materials contained in each end of life (EOL) product entering the recycling facilities. Therefore an accurate accounting process taking into consideration the materials (with standards if available), mass, chemical composition and smallest dimension (e.g. a screw) is proposed.
An important aspect of the CEI is the possibility to compute it also at sector or company levels by making use of the financial data contained in the financial reports at company level or in the database of the institutions which collect data at national level (e.g. bureau of statistics, chamber of commerce, etc.).
To experimentally compute the CEI it is necessary to know detailed information of the components and materials contained in each end of life (EoL) product entering the recycling facilities. Therefore the development and demonstration of Key Recycling Info (KRI) system which takes into consideration the materials (with standards if available), mass, chemical composition and smallest dimension (e.g. a screw) is necessary. EOL products should be taken apart in all components and dismantled (i.e. a model of flat panel display, a model of washing machine, five regular plastic packaging). Each EOL’s component should be disassembled and documented so that the precise number of indivisible components as well as amount of each material contained in the selected product goods is available and collected in the Key Recycling Info sheet. From this sheet the precise market value embedded in the EOL products can be calculated at any time.
Industry plays an important role for innovation and efficiency in a market economy and is particularly prone to generate value from scarce resources. It is generally accepted that without corporate support, society will not achieve environmental sustainability, as firms represent the productive resources of the economy [
The Gross Value Added method takes into consideration the value of the materials contained in each functional component a product is made of. Although this information may be considered as confidential when the product is launched on the market, it is no longer the case after a predictable period of time (which depends from the specific consumer product characteristics). As soon as the product reaches its end of life and enters the recycling facilities, it will be possible to calculate the GVA generated by processing that product.
The GVA can be computed also using financial data. The general formula of GVA is the following:
GVA = Recycling firm revenues―non factor costs.
Recycling firm revenues include mainly revenues from selling secondary materials.
Non-factor costs for recycling companies include costs for energy and input materials.
Therefore the GVA of recycling companies consists mainly of the resource added value of the recycling activities.
The CEI will be the ratio of the GVA over the material input value (cf.
The CEI is linked to several targets we want to achieve in society (e.g. economic growth) and from management point of view requires data that can actually be easily generated (GVA). From the science point of view it relates to the societal and environmental impacts of economic growth.
From
Commission directive [
The following example will make the above point even more outstanding. If the composition of the car is the one presented in
Three scenarios can be envisaged:
Materials | Steel | Plastics | Al | Cu |
---|---|---|---|---|
Mass (kg) | 600 | 130 | 50 | 20 |
1) Use of standard technology to extract 620 kg of steel contaminated by Cu from the ASR.
2) Use of advanced technology to extract 130 kg plastics plus 50 kg Al from the ASR.
3) Use of advanced technology to separate steel from Cu.
From the mass recycling rate point of view, the largest contribution is in Scenario 1 because the larger amount of material (low grade steel) is recycled from the EoL car (620 kg). However if we use a CEI approach, the separation of the 120 kg of plastics and the 50 kg of Al, produces a higher value and at the same time, has a higher positive impact on the environment (cf.
Concerns about sustainable management of natural resources and efficient use of raw materials are growing worldwide. In particular materials and energy security. At the same time, the need to minimize environmental impact is more critical than ever. Against this background, many governments have increased efforts to promote deployment of resources efficient technologies that can strengthen resources security. This may stimulate an interest in innovative green technologies so that they are now a growing sector of the sustainable technology field.
Transforming the economy onto a resource-efficient path will bring increased competitiveness and new sources of growth and jobs through cost savings from improved efficiency, commercialisation of innovations and better management of resources over their whole life cycle. This requires policies that recognize the interdependencies between the economy, wellbeing and natural capital and seeks to remove barriers to improved resource efficiency, whilst providing a fair, flexible, predictable and coherent basis for business to operate [
In order for decision makers to be effective, they need robust and clear indicators that show the links between social, environmental and economic goals so that they can better understand how to achieve economic growth that is in harmony with the natural systems within which we live and work [
Indicators can be used i) individually, ii) as part of a set, or iii) in the form of a composite index that combines individual indicator scores into a single number. Such a single aggregated number can be very useful in communicating information on general sustainability to the public and to decision makers [
The advantage of the CEI proposed here is that it provides a clear indication of how good a recycling company is in valorizing the materials it processes and in combination with the KRI give environmental, technical and economic information which are useful to better perform LCA, MFA, I/O analysis, to design recycling processes and to predict the amount of stock-in-use materials.
Moreover the CEI and KRI may be used by policy makers to foster innovation by properly designing environmental standards. Such standards can trigger innovation that may partially or more than fully offset the costs of complying with them. Such “innovation offsets,” [
In this paper, we argue that in order to move towards a more sustainable development, it is necessary to reclaim as much as possible material value from waste through effective recycling. To date this is not happening because the current indicators are not properly related to socio-economic goals. Therefore we propose a simple and robust indicator (the CEI) that is easy to be calculated and interpreted.
We show that the CEI is related to societal targets as well as the environmental and economic ones. Extracting value from EOL products brings about increased revenues (more jobs) and at the same time, decreases the impact on the environment.
The indicator we proposed fosters the use of innovative technologies to valorize the secondary resources contained in waste streams.
FrancescoDi Maio,Peter CarloRem, (2015) A Robust Indicator for Promoting Circular Economy through Recycling. Journal of Environmental Protection,06,1095-1104. doi: 10.4236/jep.2015.610096