Monodisperse hollow magnetite microspheres were successfully synthesized by an one-step process through a tem-plate-free hydrothermal approach employing simultaneously a mixture of FeCl<sub>3</sub>.6H<sub>2</sub>O and ferrocene as precursor and a propylene glycol-isopropanol mixture as solvent. The morphologies and properties of the magnetite microspheres were characterized by X-ray diffraction (XRD), Raman and infrared spectroscopy, field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), adsorption of nitrogen (BET method) and SQUID magnetometry. The results show that the microspheres consist of a single crystalline phase of magnetite. On the other hand, the size and the internal hollow of the microspheres depend on the temperature of growth and can be tuned by modifying the synthesis conditions.
During the last decade an increasing attention has been paid to the design and fabrication of nanomaterials with controlled shapes and morphologies. Recently, this research has been focused on the synthesis of functional materials with novel structures including nanorods, nanotubes, nanospheres or microspheres in a variety of sizes, ranging from a few tenths of nanometers to several hundreds of nanometers [1-4]. Among these materials, magnetic nanostructures [5-7] have attracted a great deal of attention due to their interesting advantages such as magnetic properties [
Among these magnetic materials, magnetite nanoparticles with an interior void, represent an interesting family of nanostructures with paramount relevance in biological applications. These materials are characterized by having a large surface area, a very low density and also a strong magnetic response that make them candidates for a number of potential applications. Thus, the internal hollow spaces may potentially be used as hosts for the encapsulation of guest molecules and sensitive compounds such as specific drugs, catalysts, highly toxic compounds or any other group of substances that in the living environment can be directed towards the desired objective by applying external magnetic fields [27,28]. Different strategies have been reported on the synthesis of monodisperse magnetite hollow particles such as the Kirkendall effect [
Here, we report an one-step hydrothermal procedure without the use of surfactants or templates. In our case, we have used a mixture of FeCl3·6H2O and ferrocene as precursors and a propylene glycol-isopropanol mixture as solvent. One of the most interesting advantages of this method is the relatively low synthesis temperature used in some cases (120˚C) and also the possibility of controlling efficiently the dimensionality of the magnetite microspheres, including the thickness of the walls and the volume of the internal void. Thus, we have obtained hollow microspheres ranging from ca. 300 to 600 nm with diameters that can be adjusted by varying the synthesis temperature.
All reagents used in the present investigation were of analytical grade. FeCl3·6H2O, propylene glycol and isopropanol were provided by Sigma-Aldrich and used as received, without further purification. Ferrocene (98%) was purchased from Sigma-Aldrich and purified by double vacuum sublimation before use. MilliQ water (18.2 MΩ·cm at 25˚C) was used for all experiments.
In a typical synthesis of hollow magnetite microspheres, 2 mmol of ferrocene were added to 50 mL of isopropanol. The mixture was stirred magnetically at room temperature for 1 hour. Next, 1 mmol of FeCl3·H2O was added to this solution, followed by dropwise addition of 10 mL of propylene glycol. After addition was complete, the mixture was refluxed for 2 hours. Next, the solution was allowed to cool and centrifuged at 1000 rpm for 10 min. The small sediment was discarded and the supernatant was incorporated into Teflon-lined stainless steel autoclaves of 50 mL capacity and maintained at different temperatures (ranging from 120 to 200˚C) for 10 hours. After cooling to room temperature, the black sediment is collected and washed from the impurities of the supernatant by adding isopropanol and centrifuged at least 5 times. Next, the black powder was dried overnight at 70˚C and maintained in sealed containers before characterization.
With the aim of modifying the microspheres size (including the wall thickness and void diameter) and size distribution of the nanoparticles, the influence of the reaction time, growth temperature and the initial reaction mixture was investigated.
Field emission scanning electron microscopy (FESEM) images were obtained using a JEOL JM-6400 microscope. Raman spectra were recorded using a Confocal Raman Microscope (Renishaw RM2000) equipped with laser sources at 514 nm and 633 nm and an electrically refrigerated CCD camera. The spectral resolution was set at 4 cm−1, laser power employed was less 15 mW and acquisition time of each spectrum was around 200 sec.
XPS measurements were performed on an ESCALAB 220I-XL spectrometer, by using the non-monochromated Mg Kα (1253.6 eV) radiation of a twin-anode, operating at 20 mA and 12 kV in the constant analyzer energy mode with a pass energy of 50 eV. Before spectra acquisition, the samples were degassed for 24 hours. The vacuum during spectra acquisition was better than 5 × 10−9 mbar. In order to remove charging shifts and deal with Fermi edge coupling problems, binding energies were corrected using the peak of the C-(C,H) component coming from contamination carbon (set to 284.6 eV).
The specific surface area, the pore volume and the pore size distribution (PSD) of the hollow magnetite microspheres, were measured using an Autosorb-1. With the help of the adsorption isotherms, the micropore volume, WMP [cm2/g] was measured using the t-plot method and the specific surface area, S [m2/g], applying the BET method [
Fourier transform-infrared (FT-IR) spectra were recorded in transmission mode on a Thermo Scientific Nicolet iS10 FTIR spectrometer using KBr wafers. The spectra were collected with a resolution of 4 cm−1 and were made 200 scans per sample.
XRD diffractograms were obtained using a Bruker D8 Advance system in Bragg-Brentano vertical goniometer configuration. The angular measurements (θ - 2θ) were made with reproducibility of: ±0.0001 degree, applying steps of 0.05 degrees from 5 to 110 degrees. The X-ray radiation source was a ceramic X-ray diffraction Cu anode tube type KFL C 2K of 2.2 kW, with long fine focus. A Ni filter was placed to eliminate the Cu-Kß radiation.
The magnetic properties (M-H curves) of the magnetite samples were measured by using a Quantum Design MPMS XL-7 superconducting quantum interference device (SQUID) magnetometer at room temperature.
Typical synthesis of hollow magnetite nanoparticles have been carried out by using a hydrothermal procedure. Different experimental parameters, including temperature and reaction time, were tested during the synthesis to determine the effects on the morphology and size of the nanoparticles. Apparently, only the reaction temperature could be correlated with relevant changes in the nanoparticles. The effect of different reaction times (ranging from 2 h to 20 h) was studied and it was found that after 4 hours of reaction, the particles were almost formed. The average particle size does not seem to depend on the time of growth but nevertheless, the sphericity of these improved from 8 hours of reaction. For this reason, we fixed the reaction time to 10 h. Another parameter studied was the growth temperature. It was found that the average size and the hole and wall dimensions of hollow magnetite particles clearly depended on the reaction temperature. Results are summarized on
The SEM images of the as-synthesized samples are shown in