Assessment of water and energy footprint for eight bottled water industries was carried out. The investigation showed that one litre of bottled water has a water footprint of 17.41 litres and energy footprint of 7.08 MJ. Water consumption by the industry comprises 61% during material production, 17% in processes, 16% in energy and only 6% in the actual product. Hence, maximum consumption of water is in material production, while the processes required a smaller fraction of the total water and energy consumed. Therefore, water footprint can be reduced through optimization of water consumption in material production.
India is a developing country whose sustainable development and water usage are inextricably allied. Approximately 85% of the rural population of India is dependent on ground water. In the urban areas, though about 60% of the population is dependent on surface water sources, the quality is deteriorating. According to the studies carried out, the amount of annual utilizable water in India is 1100 Billion Cubic Meters (BCM). To meet food supply requirement for its fast growing population, India would require about 770 BCM by 2025, which is 70% of the total and the demand would be 1013 BCM which is very much close to the potential (www.whoindia.org). There is water scarcity during critical summer season. Ten percent of the population depends on unsafe water sources. The chemical and agrochemical contaminants are mostly responsible for polluting surface and ground water respectively.
The bottled water industries are flourishing in India especially in urban areas. The total annual consumption of bottled water has tripled in 2004 from 1999 (Chandra bhushan, 2006). There are more than 200 brands, nearly 80 per cent of which are local brands. The availability of water in PET (Polyethylene terephthalate) bottles with different capacities like 0.5 litre, 1 litre, and 20 litres becomes convenient to carry.
The water footprint is an indicator of direct and indirect uses of water. This includes Real Water Content (RWC) and Virtual Water Content (VWC), which is the water required for manufacturing the raw material, water used in processes and in energy generation for production purpose. Water footprint is also divided into Green water footprint (Rain Water), Blue water footprint (Ground or Surface water) and Grey water footprint. “Water Neutral” is a terminology which means reducing the water footprint of an activity as much as possible and offseting the negativity. Water Neutral does not mean that nullification of water is not possible in all cases but it means that water recycling and zero waste is quite possible in this particular industry.
LCA is an environmental tool to judge a material’s performance as an ecofriendly option to its functional alternatives. Within an industry, LCA can be used for product development, future plans, making public policies, developing new marketing norms and a number of different applications [
In the present investigation, the data of eight bottled water industries were analyzed from different regions of Maharashtra state of India with the functional unit of 1 litre. In Indian conditions, bottled water has become hygienic and safe option for drinking water. The experimental study was done with the surveyed industries for energy demand and water demand with respect to RWC and VWC. The study was also carried out with the annual bottled water demand in the country, water consumption and the energy required for the fulfillment of this demand.
The primary data on water usage and energy utilization was collected for 8 bottled water industries in India through visits to the industries and questionnaires. The primary data includes water intake, water usage distribution and energy utilization in the actual water treatment.
The secondary data was collected from the web sources, research papers, science magazines etc. The secondary data was used to calculate water and energy consumption for raw PET preparation, perform production, preparation of packing material like cardboard cartons along with the utilization in transportation and distribution to whole sellers, retailers or to direct consumers (in case of 20 litres jar).
The energy implication and water footprint of the bottled water are major issues of concern. Energy is required for PET resins formation and blowing of performs, water processing (Sand filtration, RO, Ozonation, bottling etc.), transportation and then for collection and recycling. Water footprint comprises production of raw polymer, carton material, processing, transportation.
Bottled water is sold in the Indian market in various convenient packs like half litre, 1-litre bottles and 20 litre jars. Polyethylene terephthalate (PET), the thermoplastic polymer is used for single use. As the container capacity increases manufacturers likely to toggle from PET to polycarbonate for rigidity and safety which required 40% more energy than PET bottles [
Energy is required in the production of raw PET material and production of PET bottles, which is provided by various means like gas, petroleum and local electricity network. The life cycle assessment (LCA) of PET shows required energy of 77 MJ∙kg−1 for virgin PET [
The energy required for diverse processes involved in pretreatment of water prior to filling in the bottles includes washing, sand filtration, reverse osmosis etc. (
Water foot print indicates direct and indirect use of water in the production of desired product. The water footprint of a business (BWF) can be defined as the total volume of freshwater that is used directly or indirectly to run and
support a business. The water footprint of a business consists of two components: the operational water use (direct water use) and the water use in the supply chain (indirect water use) [
The materials used in the production of bottled water are mainly PET resin or PET bottle and the cardboard cartons used for packaging and delivering the bottles.
The energy required in the material production and in the processing has also been taken in account for WF calculation. The concept of conducting a detailed examination of the life cycle of a product or a process is a relatively recent one which emerged in response to increased environmental awareness on the part of the general pub-
lic, industry and governments.
As per the LCA, production of 1 kg of virgin PET resin required 294.2 litres of water as the PET material is hygroscopic in nature [
Environmental assessment of the cardboard by inferred that, one ton of the cardboards manufacturing required around 41.25 KL of water that is 41.25 litre of water for a kilogram [
The water consumption in the energy requirement for different processes also needs to be considered. Most of the power plants in the India are running on the coal i.e. thermal power plants providing energy to the country. Thermal power plants have mainly two types Subcritical Pulverized Coal and Supercritical Pulverized Coal which requires 520 and 450 gallons of water for production of one MWh of energy respectively. One kilogram of cardboard paper production required around 1.26 KWh or 4.5 MJ of energy. On an average 500 gallons of water is needed for production of 1 MWh of energy. The virtual water content(material) mainly comprises water consumption in PET bottle preparation and cartons manufacturing. As discussed earlier 1 bottle manufacturing required around 7.23 litres of water and single carton has a water footprint of 3.43 litres. Another 1.31 litres goes in the energy requirement for the PET bottle production. The energy required in this panoramic study encompasses energy in PET bottle production, carton production and energy required in water treatment processes which will give virtual water content(energy). So the total energy requirement for sampling unit that is for litre is 2.95 MJ inferred that 1.54 litre.
The production of bottled water gives a footprint of 17.41 litres for the production of one litre bottle (
In India, bottled water industries are growing rapidly in current years and would follow the same trend in the recent future. The energy and water footprint calculation of
this particular industry gives an idea about environmental threats caused by this industry with respect to energy and water requirement. This particular investigation gives water footprint of 1 litre bottle as 17.41 litres. Along with the water footprint, energy demand in the bottled water manufacturing is around 7.08 MJ/litre. Hence, it can be said that this particular industry will impact on the environment with respect to energy and water demand. India is facing shortfall of both, as the supply is much lesser than the demand.