To develop a method for the early diagnosis of health damage due to arc welding, we measured serum ferritin in 96 general employees and 320 arc welders in Company A. A positive correlation was observed between age and the serum ferritin level in the young group (age, 20 - 44 years) among the general employees. The mean serum ferritin level in the general employees was 119 ± 56 ng/ml. When the mean ± 2.5 SD was used as the standard value, ferritin levels > 260 ng / ml could be regarded as high. Based on this standard value, high ferritin levels were observed in 7 (6.6%) of 106 young arc welders in Company A but none of the general employees. Chest X-ray films showed minimal abnormality in one of 7 young arc welders who showed high ferritin levels. These results suggest that the determination of the serum ferritin level is useful for the early diagnosis of health damage due to arc welding.
Arc welder’s lung is a lung disorder observed in arc welders. It is considered to be a type of industrial accident in Japan and a disease to which the Pneumoconiosis Law is applied. Currently, in Japan, strict measures are taken to prevent the development of arc welder’s lung, and instructions are also given by the Ministry of Health, Labor and Welfare.
We recently encountered a 58-year-old male with arc welder’s lung, which was the motive for performing this study [
Based on the findings in this patient, we speculated that the measurement of serum ferritin allows the early confirmation of health damage due to arc welding, and performed this study.
The subjects were 320 arc welders and 96 general employees in a company (Company A) from which cooperation was obtained. Two items (serum ferritin and serum iron) were added to the blood analysis items in the general health checkup examination. In this company, masks are always used during arc welding, and the working environment, such as ventilation, was adequate.
Oral consent was obtained from the subjects, and blood for serum ferritin analysis was collected simultaneously with blood collection for the analysis of other items in a periodical health examination. The current study was conducted in accordance with the recommendations outlined in the Declaration of Helsinki.
The data were analyzed for inter-group differences in plasma ferritin concentration with Mann-Whitney’s U test. All data were analyzed with StatView version 5.0 for Macintosh. All data are reported as the mean ± SD. A two-tailed value of p < 0.05 was considered significant.
The mean ferritin level ± 2.5 SD in the general employees was calculated, and the normal limit was determined to be 260 ng/ml. In the young general employee group, none showed a serum ferritin level above this normal limit. However, some arc welders showed high serum ferritin levels (highest, 702 ng/ml). In the young arc welder group £ 40 years, 7 (6.6%) of 106 welders showed a high serum ferritin level, and the incidence signifycantly differed between this group and the young general employee group (c2 test, p < 0.05). Thus, in the young group, some showed high serum ferritin levels estimated
to be observed in arc welders. There was only one subject who showed chest X-ray abnormality in these 7 young arc welders. Chest X-ray examination at the periodical health examination showed minimal abnormal findings in 11 of 320 arc welders. However, there was no significant difference in serum ferritin level between arc welders with and without abnormalities of chest X-ray examinations.
The serum iron level did not significantly differ between the general employees (112 ± 36 ng/ml) and the arc welders (115 ± 40 ng/ml).
The welding process consists of several steps. Though the fumes generated differ among the steps, at least 13 metals (such as Fe, Cr, Co, Zn, Cd, Mn, Be, Hg, and Pb) are considered to be involved [
In arc welder’s lung, an increase in the serum ferritin level has been reported [3,4]. Yoshii et al. reported a significantly higher ferritin level in the bronchoalveolar lavage fluid in welder’s pneumoconiosis than in welder’s lung before the stage of pneumoconiosis, pneumocilicosis, or pulmonary asbestosis. They also reported the usefulness of the serum ferritin level and BAL ferritin level for the diagnosis of arc welder’s lung [
Lu et al. recently evaluated serum ferritin in welders [
In this study, some arc welders showed a serum ferritin level higher than that in the general employees. In these employees in Company A, chest X-ray examination showed only slight abnormalities in the lung fields. An increase in the serum ferritin level may be a blood examination abnormality prior to chest X-ray findings. These findings suggest that the measurement of serum ferritin allows the early detection of arc welding-associated health damage prior to the development of arc welder’s lung in some cases. Further long-term observation is necessary.
Our results suggest the usefulness of the measurement of serum ferritin in the early diagnosis of health damage due to arc welding.